circuitpython/ports/espressif/boards/espressif_kaluga_1.3/mpconfigboard.mk

USB_VID = 0x239A
USB_PID = 0x80C8
USB_PRODUCT = "Kaluga 1"
USB_MANUFACTURER = "Espressif"

IDF_TARGET = esp32s2

INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = MPZ

# The default queue depth of 16 overflows on release builds,
# so increase it to 32.
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32

CIRCUITPY_ESP_FLASH_MODE=dio
CIRCUITPY_ESP_FLASH_FREQ=80m
CIRCUITPY_ESP_FLASH_SIZE=4MB

CIRCUITPY_MODULE=wrover
Add kaluga version 1.3 .. this board is nearly the same as the "1.2" version originally released, but makes a few changes to reduce pin conflicts between the 13-pin camera header and the bootstrapping pins. "1.3" was introduced in summer 2020-- check the bottom of your board silk to find out whether you have a 1.2 or a 1.3, because it's not clear whether there is remaining 1.2 stock. Another vexing fact about the 1.3 is that its LCD can have one of two chipets, and the chipset used is not marked anywhere! 2021-06-08 14:25:50 -04:00			`USB_VID = 0x239A`
			`USB_PID = 0x80C8`
			`USB_PRODUCT = "Kaluga 1"`
			`USB_MANUFACTURER = "Espressif"`

switch to `IDF_TARGET` for soc dependent stuff Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com> 2021-09-18 08:54:32 -04:00			`IDF_TARGET = esp32s2`

Add kaluga version 1.3 .. this board is nearly the same as the "1.2" version originally released, but makes a few changes to reduce pin conflicts between the 13-pin camera header and the bootstrapping pins. "1.3" was introduced in summer 2020-- check the bottom of your board silk to find out whether you have a 1.2 or a 1.3, because it's not clear whether there is remaining 1.2 stock. Another vexing fact about the 1.3 is that its LCD can have one of two chipets, and the chipset used is not marked anywhere! 2021-06-08 14:25:50 -04:00			`INTERNAL_FLASH_FILESYSTEM = 1`
			`LONGINT_IMPL = MPZ`

			`# The default queue depth of 16 overflows on release builds,`
			`# so increase it to 32.`
			`CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32`

			`CIRCUITPY_ESP_FLASH_MODE=dio`
			`CIRCUITPY_ESP_FLASH_FREQ=80m`
			`CIRCUITPY_ESP_FLASH_SIZE=4MB`

			`CIRCUITPY_MODULE=wrover`