circuitpython/ports/esp32/partitions-4MiB-ota.csv

# Partition table for MicroPython with OTA support using 4MB flash
# Notes: the offset of the partition table itself is set in
# $IDF_PATH/components/partition_table/Kconfig.projbuild.
# Name,   Type, SubType, Offset,   Size,     Flags
nvs,      data, nvs,     0x9000,   0x4000,
otadata,  data, ota,     0xd000,   0x2000,
phy_init, data, phy,     0xf000,   0x1000,
ota_0,    app,  ota_0,   0x10000,  0x180000,
ota_1,    app,  ota_1,   0x190000, 0x180000,
vfs,      data, fat,     0x310000, 0x0f0000,
esp32: Improve support for OTA updates. This commit adds several small items to improve the support for OTA updates on an esp32: - a partition table for 4MB flash modules that has two OTA partitions ready to go to do updates - a GENERIC_OTA board that uses that partition table and that enables automatic roll-back in the bootloader - a new esp32.Partition.mark_app_valid_cancel_rollback() class-method to signal that the boot is successful and should not be rolled back at the next reset - an automated test for doing an OTA update - documentation updates 2020-04-02 01:59:08 -04:00			`# Partition table for MicroPython with OTA support using 4MB flash`
esp32/partitions: Update comments in files regarding offset. 2020-04-30 03:22:33 -04:00			`# Notes: the offset of the partition table itself is set in`
esp32/makeimg.py: Load sizes from partition table and verify data fits. Changes introduced are: - the application offset is now loaded from the partition table instead of being hard-coded to 0x10000 - maximum size of all sections is computed using the partition table - an error is generated if any section overflows its allocated space - remaining bytes are printed for each section Signed-off-by: Damien George <damien@micropython.org> 2021-06-11 01:28:07 -04:00			`# $IDF_PATH/components/partition_table/Kconfig.projbuild.`
esp32/partitions: Update comments in files regarding offset. 2020-04-30 03:22:33 -04:00			`# Name, Type, SubType, Offset, Size, Flags`
esp32: Improve support for OTA updates. This commit adds several small items to improve the support for OTA updates on an esp32: - a partition table for 4MB flash modules that has two OTA partitions ready to go to do updates - a GENERIC_OTA board that uses that partition table and that enables automatic roll-back in the bootloader - a new esp32.Partition.mark_app_valid_cancel_rollback() class-method to signal that the boot is successful and should not be rolled back at the next reset - an automated test for doing an OTA update - documentation updates 2020-04-02 01:59:08 -04:00			`nvs, data, nvs, 0x9000, 0x4000,`
			`otadata, data, ota, 0xd000, 0x2000,`
			`phy_init, data, phy, 0xf000, 0x1000,`
			`ota_0, app, ota_0, 0x10000, 0x180000,`
			`ota_1, app, ota_1, 0x190000, 0x180000,`
			`vfs, data, fat, 0x310000, 0x0f0000,`