circuitpython/stm/boards/PYBOARD4/pins.csv

X1,PA0
X2,PA1
X3,PA2
X4,PA3
X5,PA4
X6,PA5
X7,PA6
X8,PA7
X9,PB6
X10,PB7
X11,PC4
X12,PC5
X13,Reset
X14,GND
X15,3.3V
X16,VIN
X17,PB3
X18,PC13
X19,PC0
X20,PC1
X21,PC2
X22,PC3
X23,A3.3V
X24,AGND
Y1,PC6
Y2,PC7
Y3,PB8
Y4,PB9
Y5,PB12
Y6,PB13
Y7,PB14
Y8,PB15
Y9,PB10
Y10,PB11
Y11,PB0
Y12,PB1
Y13,Reset
Y14,GND
Y15,3.3V
Y16,VIN
LED_BLUE,PB4
LED_RED,PA13
LED_GREEN,PA14
LED_YELLOW,PA15
SW,PB3
stm: Update PYBOARD4 pin mapping. 2014-02-19 18:38:42 -05:00			`X1,PA0`
			`X2,PA1`
			`X3,PA2`
			`X4,PA3`
			`X5,PA4`
			`X6,PA5`
			`X7,PA6`
			`X8,PA7`
			`X9,PB6`
			`X10,PB7`
			`X11,PC4`
			`X12,PC5`
			`X13,Reset`
			`X14,GND`
			`X15,3.3V`
			`X16,VIN`
Add pin mapping code. This commit also introduces board directories and moves board specific config into the appropriate board directory. boards/stm32f4xx-af.csv was extracted from the STM32F4xx datasheet and hand-tweaked. make-pins.py takes boards/stm32f4xx-af.csv, boards/stm32f4xx-prefix.c, and boards/BOARD-NAME/pins.csv as input and generates the file build/pins_BOARD_NAME.c The generated pin file for PYBOARD4 looks like this: https://gist.github.com/dhylands/9063231 The generated pins file includes all of the supported alternate functions, and includes upsupported alternate functions as comments. See the commnet block at the top of stm/pin_map.c for details on how to use the pin mapper. I also went ahead and modified stm/gpio.c to use the pin mapper. 2014-02-17 20:57:13 -05:00			`X17,PB3`
			`X18,PC13`
			`X19,PC0`
			`X20,PC1`
			`X21,PC2`
			`X22,PC3`
			`X23,A3.3V`
			`X24,AGND`
stm: Update PYBOARD4 pin mapping. 2014-02-19 18:38:42 -05:00			`Y1,PC6`
			`Y2,PC7`
			`Y3,PB8`
			`Y4,PB9`
			`Y5,PB12`
			`Y6,PB13`
			`Y7,PB14`
			`Y8,PB15`
			`Y9,PB10`
			`Y10,PB11`
			`Y11,PB0`
			`Y12,PB1`
			`Y13,Reset`
			`Y14,GND`
			`Y15,3.3V`
			`Y16,VIN`
Add pin mapping code. This commit also introduces board directories and moves board specific config into the appropriate board directory. boards/stm32f4xx-af.csv was extracted from the STM32F4xx datasheet and hand-tweaked. make-pins.py takes boards/stm32f4xx-af.csv, boards/stm32f4xx-prefix.c, and boards/BOARD-NAME/pins.csv as input and generates the file build/pins_BOARD_NAME.c The generated pin file for PYBOARD4 looks like this: https://gist.github.com/dhylands/9063231 The generated pins file includes all of the supported alternate functions, and includes upsupported alternate functions as comments. See the commnet block at the top of stm/pin_map.c for details on how to use the pin mapper. I also went ahead and modified stm/gpio.c to use the pin mapper. 2014-02-17 20:57:13 -05:00			`LED_BLUE,PB4`
			`LED_RED,PA13`
			`LED_GREEN,PA14`
			`LED_YELLOW,PA15`
			`SW,PB3`