circuitpython/ports/nrf/boards/espruino_banglejs2/mpconfigboard.mk

CIRCUITPY_CREATOR_ID = 0xBA000000
CIRCUITPY_CREATION_ID = 0x0BA20001
MCU_CHIP = nrf52840

SPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICES = "XT25F64B,GD25Q64C"

CIRCUITPY_USB = 0

CIRCUITPY_FULL_BUILD = 1
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_AUDIOPWMIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_NEOPIXEL_WRITE = 0
CIRCUITPY_ROTARYIO = 0
CIRCUITPY_SYNTHIO = 0
CIRCUITPY_AESIO = 0
CIRCUITPY_ANALOGIO = 1
CIRCUITPY_AUDIOCORE = 0
CIRCUITPY_AUDIOMIXER = 0
CIRCUITPY_RAINBOWIO = 0
CIRCUITPY_RGBMATRIX = 0
CIRCUITPY_ONEWIREIO = 0

CIRCUITPY_BUILD_EXTENSIONS = espruino.zip

CIRCUITPY_DISPLAYIO = 1
Add Bangle.js 2, JDI memory displays and ACeP epd This 2-in-1 PR started with the goal of support the Bangle.js 2 smartwatch with no USB. * Adds "secure" DFU build support with a committed private key. * Adds 3-bit color support with one dummy bit for the JDI memory display * Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK. This is needed because the Bangle.js 2 uses the watchdog to reset. * Renamed port_background_task() to port_background_tick() to indicate it runs on tick, not RUN_BACKGROUND_TASK. * Marks serial connected when the display terminal is inited. This means that safe mode messages show up on the display. ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that support as well. * Adds 3-bit ACeP color support for 7-color e-paper displays. (Not watch related but similar due to color depth.) * Allows a refresh sequence instead of a single int command. The 7" ACeP display requires a data byte for refresh. * Adds optional delay after resetting the display. The ACeP displays need this. (Probably to load LUTs from flash.) * Adds a cleaning phase for ACeP displays before the real refresh. For both: * Add dither support to Palette. * Palette no longer converts colors when set. Instead, it caches converted colors at each index. * ColorConverter now caches the last converted color. It should make conversions faster for repeated colors (not dithering.) 2022-07-30 01:09:49 -04:00			`CIRCUITPY_CREATOR_ID = 0xBA000000`
			`CIRCUITPY_CREATION_ID = 0x0BA20001`
			`MCU_CHIP = nrf52840`

			`SPI_FLASH_FILESYSTEM = 1`
			`EXTERNAL_FLASH_DEVICES = "XT25F64B,GD25Q64C"`

			`CIRCUITPY_USB = 0`

			`CIRCUITPY_FULL_BUILD = 1`
			`CIRCUITPY_AUDIOBUSIO = 0`
			`CIRCUITPY_AUDIOPWMIO = 0`
			`CIRCUITPY_COUNTIO = 0`
			`CIRCUITPY_NEOPIXEL_WRITE = 0`
			`CIRCUITPY_ROTARYIO = 0`
			`CIRCUITPY_SYNTHIO = 0`
			`CIRCUITPY_AESIO = 0`
			`CIRCUITPY_ANALOGIO = 1`
			`CIRCUITPY_AUDIOCORE = 0`
			`CIRCUITPY_AUDIOMIXER = 0`
			`CIRCUITPY_RAINBOWIO = 0`
			`CIRCUITPY_RGBMATRIX = 0`
			`CIRCUITPY_ONEWIREIO = 0`

			`CIRCUITPY_BUILD_EXTENSIONS = espruino.zip`

			`CIRCUITPY_DISPLAYIO = 1`