circuitpython/ports/nrf/boards/feather52/mpconfigboard.h

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Glenn Ruben Bakke
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#define MICROPY_HW_BOARD_NAME       "Bluefruit nRF52 Feather"
#define MICROPY_HW_MCU_NAME         "NRF52832"
#define MICROPY_PY_SYS_PLATFORM     "nrf52"

#define MICROPY_PY_MACHINE_HW_PWM   (1)
#define MICROPY_PY_MACHINE_HW_SPI   (1)
#define MICROPY_PY_MACHINE_TIMER    (1)
#define MICROPY_PY_MACHINE_RTC      (0)
#define MICROPY_PY_MACHINE_I2C      (1)
#define MICROPY_PY_MACHINE_ADC      (1)
#define MICROPY_PY_MACHINE_TEMP     (1)

#define MICROPY_HW_HAS_LED          (1)
#define MICROPY_HW_HAS_SWITCH       (0)
#define MICROPY_HW_HAS_FLASH        (0)
#define MICROPY_HW_HAS_SDCARD       (0)
#define MICROPY_HW_HAS_MMA7660      (0)
#define MICROPY_HW_HAS_LIS3DSH      (0)
#define MICROPY_HW_HAS_LCD          (0)
#define MICROPY_HW_ENABLE_RNG       (0)
#define MICROPY_HW_ENABLE_RTC       (0)
#define MICROPY_HW_ENABLE_TIMER     (0)
#define MICROPY_HW_ENABLE_SERVO     (0)
#define MICROPY_HW_ENABLE_DAC       (0)
#define MICROPY_HW_ENABLE_CAN       (0)

#define MICROPY_HW_LED_COUNT        (2)
#define MICROPY_HW_LED_PULLUP       (0)

#define MICROPY_HW_LED1             (17) // LED1
#define MICROPY_HW_LED2             (19) // LED2

// UART config
#define MICROPY_HW_UART1_RX         (pin_A8)
#define MICROPY_HW_UART1_TX         (pin_A6)
#define MICROPY_HW_UART1_HWFC       (0)

// SPI0 config
#define MICROPY_HW_SPI0_NAME        "SPI0"
#define MICROPY_HW_SPI0_SCK         (pin_A12) // (Arduino D13)
#define MICROPY_HW_SPI0_MOSI        (pin_A13) // (Arduino D11)
#define MICROPY_HW_SPI0_MISO        (pin_A14) // (Arduino D12)

#define MICROPY_HW_PWM0_NAME        "PWM0"
#define MICROPY_HW_PWM1_NAME        "PWM1"
#define MICROPY_HW_PWM2_NAME        "PWM2"

#define HELP_TEXT_BOARD_LED         "1,2"



#define PORT_HEAP_SIZE                (16*1024)
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500