circuitpython/ports/atmel-samd/common-hal/digitalio/DigitalInOut.c

170 lines
5.9 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include <string.h>
#include "py/runtime.h"
#include "py/mphal.h"
#include "hal/include/hal_gpio.h"
#include "common-hal/microcontroller/Pin.h"
#include "shared-bindings/digitalio/DigitalInOut.h"
digitalinout_result_t common_hal_digitalio_digitalinout_construct(
digitalio_digitalinout_obj_t* self, const mcu_pin_obj_t* pin) {
claim_pin(pin);
self->pin = pin;
gpio_set_pin_pull_mode(pin->pin, GPIO_PULL_OFF);
gpio_set_pin_direction(pin->pin, GPIO_DIRECTION_IN);
return DIGITALINOUT_OK;
}
bool common_hal_digitalio_digitalinout_deinited(digitalio_digitalinout_obj_t* self) {
return self->pin == mp_const_none;
}
void common_hal_digitalio_digitalinout_deinit(digitalio_digitalinout_obj_t* self) {
if (common_hal_digitalio_digitalinout_deinited(self)) {
return;
}
reset_pin(self->pin->pin);
self->pin = mp_const_none;
}
void common_hal_digitalio_digitalinout_switch_to_input(
digitalio_digitalinout_obj_t* self, enum digitalio_pull_t pull) {
self->output = false;
common_hal_digitalio_digitalinout_set_pull(self, pull);
}
void common_hal_digitalio_digitalinout_switch_to_output(
digitalio_digitalinout_obj_t* self, bool value,
enum digitalio_drive_mode_t drive_mode) {
2017-10-23 12:29:17 -04:00
const uint8_t pin = self->pin->pin;
gpio_set_pin_pull_mode(pin, GPIO_PULL_OFF);
gpio_set_pin_direction(pin, GPIO_DIRECTION_OUT);
// Turn on "strong" pin driving (more current available). See DRVSTR doc in datasheet.
hri_port_set_PINCFG_DRVSTR_bit(PORT, (enum gpio_port)GPIO_PORT(pin), pin);
self->output = true;
self->open_drain = drive_mode == DRIVE_MODE_OPEN_DRAIN;
common_hal_digitalio_digitalinout_set_value(self, value);
}
enum digitalio_direction_t common_hal_digitalio_digitalinout_get_direction(
digitalio_digitalinout_obj_t* self) {
return self->output? DIRECTION_OUTPUT : DIRECTION_INPUT;
}
void common_hal_digitalio_digitalinout_set_value(
digitalio_digitalinout_obj_t* self, bool value) {
if (value) {
if (self->open_drain) {
gpio_set_pin_direction(self->pin->pin, GPIO_DIRECTION_IN);
} else {
gpio_set_pin_level(self->pin->pin, true);
gpio_set_pin_direction(self->pin->pin, GPIO_DIRECTION_OUT);
}
} else {
gpio_set_pin_level(self->pin->pin, false);
gpio_set_pin_direction(self->pin->pin, GPIO_DIRECTION_OUT);
}
}
bool common_hal_digitalio_digitalinout_get_value(
digitalio_digitalinout_obj_t* self) {
2017-10-23 12:29:17 -04:00
const uint8_t pin = self->pin->pin;
if (!self->output) {
2017-10-23 12:29:17 -04:00
return gpio_get_pin_level(pin);
} else {
if (self->open_drain && hri_port_get_DIR_reg(PORT, (enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin)) == 0) {
return true;
} else {
return hri_port_get_OUT_reg(PORT, (enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin));
}
}
}
void common_hal_digitalio_digitalinout_set_drive_mode(
digitalio_digitalinout_obj_t* self,
enum digitalio_drive_mode_t drive_mode) {
bool value = common_hal_digitalio_digitalinout_get_value(self);
self->open_drain = drive_mode == DRIVE_MODE_OPEN_DRAIN;
// True is implemented differently between modes so reset the value to make
// sure its correct for the new mode.
if (value) {
common_hal_digitalio_digitalinout_set_value(self, value);
}
}
enum digitalio_drive_mode_t common_hal_digitalio_digitalinout_get_drive_mode(
digitalio_digitalinout_obj_t* self) {
if (self->open_drain) {
return DRIVE_MODE_OPEN_DRAIN;
} else {
return DRIVE_MODE_PUSH_PULL;
}
}
void common_hal_digitalio_digitalinout_set_pull(
digitalio_digitalinout_obj_t* self, enum digitalio_pull_t pull) {
enum gpio_pull_mode asf_pull = GPIO_PULL_OFF;
switch (pull) {
case PULL_UP:
asf_pull = GPIO_PULL_UP;
break;
case PULL_DOWN:
asf_pull = GPIO_PULL_DOWN;
break;
case PULL_NONE:
default:
break;
}
gpio_set_pin_pull_mode(self->pin->pin, asf_pull);
}
enum digitalio_pull_t common_hal_digitalio_digitalinout_get_pull(
digitalio_digitalinout_obj_t* self) {
uint32_t pin = self->pin->pin;
if (self->output) {
mp_raise_AttributeError("Cannot get pull while in output mode");
return PULL_NONE;
} else {
if (hri_port_get_PINCFG_PULLEN_bit(PORT, (enum gpio_port)GPIO_PORT(pin), pin) == 0) {
return PULL_NONE;
} if (hri_port_get_OUT_reg(PORT, (enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin)) > 0) {
return PULL_UP;
} else {
return PULL_DOWN;
}
}
}