circuitpython/ports/raspberrypi/boards/adafruit_qtpy_rp2040/mpconfigboard.h

#define MICROPY_HW_BOARD_NAME "Adafruit QT Py RP2040"
#define MICROPY_HW_MCU_NAME "rp2040"

#define MICROPY_HW_NEOPIXEL (&pin_GPIO12)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO11)

#define DEFAULT_I2C_BUS_SCL (&pin_GPIO25)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO24)

#define DEFAULT_SPI_BUS_SCK (&pin_GPIO6)
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO3)
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO4)

#define DEFAULT_UART_BUS_RX (&pin_GPIO5)
#define DEFAULT_UART_BUS_TX (&pin_GPIO20)
Respect product name: space between QT and Py https://www.adafruit.com/product/4900 say "Adafruit QT Py RP2040" This is also matching other "QT Py" product. 2021-04-08 15:50:16 -04:00			`#define MICROPY_HW_BOARD_NAME "Adafruit QT Py RP2040"`
QT Py with RP2040 2021-02-11 19:21:42 -05:00			`#define MICROPY_HW_MCU_NAME "rp2040"`

			`#define MICROPY_HW_NEOPIXEL (&pin_GPIO12)`
Handle status led power This no longer turns on status LED power before running user code. Therefore, use of the status LED on some boards will also have to enable the power. 2021-05-18 18:56:37 -04:00			`#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO11)`
QT Py with RP2040 2021-02-11 19:21:42 -05:00
			`#define DEFAULT_I2C_BUS_SCL (&pin_GPIO25)`
			`#define DEFAULT_I2C_BUS_SDA (&pin_GPIO24)`

			`#define DEFAULT_SPI_BUS_SCK (&pin_GPIO6)`
			`#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO3)`
			`#define DEFAULT_SPI_BUS_MISO (&pin_GPIO4)`

add USBBOOT switch, move RX pin, re-enable UART (tested) 2021-03-21 14:58:18 -04:00			`#define DEFAULT_UART_BUS_RX (&pin_GPIO5)`
			`#define DEFAULT_UART_BUS_TX (&pin_GPIO20)`