circuitpython/stmhal/boards/PYBV3/mpconfigboard.h

#define PYBV3

#define MICROPY_HW_BOARD_NAME       "PYBv3"
#define MICROPY_HW_MCU_NAME         "STM32F405RG"

#define MICROPY_HW_HAS_SWITCH       (1)
#define MICROPY_HW_HAS_SDCARD       (1)
#define MICROPY_HW_HAS_MMA7660      (1)
#define MICROPY_HW_HAS_LIS3DSH      (0)
#define MICROPY_HW_HAS_LCD          (0)
#define MICROPY_HW_ENABLE_RNG       (1)
#define MICROPY_HW_ENABLE_RTC       (1)
#define MICROPY_HW_ENABLE_TIMER     (1)
#define MICROPY_HW_ENABLE_SERVO     (1)
#define MICROPY_HW_ENABLE_DAC       (1)
#define MICROPY_HW_ENABLE_SPI1      (1)
#define MICROPY_HW_ENABLE_SPI2      (1)
#define MICROPY_HW_ENABLE_SPI3      (0)
#define MICROPY_HW_ENABLE_CAN       (1)

// HSE is 8MHz
#define MICROPY_HW_CLK_PLLM (8)
#define MICROPY_HW_CLK_PLLN (336)
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)
#define MICROPY_HW_CLK_PLLQ (7)

// The pyboard has a 32kHz crystal for the RTC
#define MICROPY_HW_RTC_USE_LSE      (1)

// X-skin: X9=PB6=SCL, X10=PB7=SDA
#define MICROPY_HW_I2C1_SCL (pin_B6)
#define MICROPY_HW_I2C1_SDA (pin_B7)

// Y-skin: Y9=PB10=SCL, Y10=PB11=SDA
#define MICROPY_HW_I2C2_SCL (pin_B10)
#define MICROPY_HW_I2C2_SDA (pin_B11)

// USRSW has no pullup or pulldown, and pressing the switch makes the input go low
#define MICROPY_HW_USRSW_PIN        (pin_A13)
#define MICROPY_HW_USRSW_PULL       (GPIO_PULLUP)
#define MICROPY_HW_USRSW_EXTI_MODE  (GPIO_MODE_IT_FALLING)
#define MICROPY_HW_USRSW_PRESSED    (0)

// LEDs
#define MICROPY_HW_LED1             (pin_A8)  // R1 - red
#define MICROPY_HW_LED2             (pin_A10) // R2 - red
#define MICROPY_HW_LED3             (pin_C4)  // G1 - green
#define MICROPY_HW_LED4             (pin_C5)  // G2 - green
#define MICROPY_HW_LED_OTYPE        (GPIO_MODE_OUTPUT_PP)
#define MICROPY_HW_LED_ON(pin)      (pin->gpio->BSRRH = pin->pin_mask)
#define MICROPY_HW_LED_OFF(pin)     (pin->gpio->BSRRL = pin->pin_mask)

// SD card detect switch
#define MICROPY_HW_SDCARD_DETECT_PIN        (pin_C13)
#define MICROPY_HW_SDCARD_DETECT_PULL       (GPIO_PULLDOWN)
#define MICROPY_HW_SDCARD_DETECT_PRESENT    (GPIO_PIN_SET)

// USB VBUS detect pin
#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 07:30:35 -04:00			`#define PYBV3`

			`#define MICROPY_HW_BOARD_NAME "PYBv3"`
Change MCU name config micro 2014-06-26 18:35:53 -04:00			`#define MICROPY_HW_MCU_NAME "STM32F405RG"`
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 07:30:35 -04:00
			`#define MICROPY_HW_HAS_SWITCH (1)`
			`#define MICROPY_HW_HAS_SDCARD (1)`
			`#define MICROPY_HW_HAS_MMA7660 (1)`
			`#define MICROPY_HW_HAS_LIS3DSH (0)`
			`#define MICROPY_HW_HAS_LCD (0)`
			`#define MICROPY_HW_ENABLE_RNG (1)`
			`#define MICROPY_HW_ENABLE_RTC (1)`
			`#define MICROPY_HW_ENABLE_TIMER (1)`
			`#define MICROPY_HW_ENABLE_SERVO (1)`
Add shell script to automatically build stmhal/ for all pyboards. 2014-05-02 09:49:44 -04:00			`#define MICROPY_HW_ENABLE_DAC (1)`
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them. 2014-04-20 14:06:15 -04:00			`#define MICROPY_HW_ENABLE_SPI1 (1)`
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-16 00:45:21 -05:00			`#define MICROPY_HW_ENABLE_SPI2 (1)`
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them. 2014-04-20 14:06:15 -04:00			`#define MICROPY_HW_ENABLE_SPI3 (0)`
stmhal: Add config option to disable/enable CAN driver. 2014-10-05 13:05:26 -04:00			`#define MICROPY_HW_ENABLE_CAN (1)`
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 07:30:35 -04:00
stmhal: Make HSE PLL parameters configurable per board. 2015-04-18 10:30:04 -04:00			`// HSE is 8MHz`
			`#define MICROPY_HW_CLK_PLLM (8)`
			`#define MICROPY_HW_CLK_PLLN (336)`
			`#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)`
			`#define MICROPY_HW_CLK_PLLQ (7)`

stmhal: Add config option to use LSE/LSI for RTC. Most boards (except the pyboard) don't have a 32kHz crystal so they should use the LSI for the RTC. 2015-03-16 18:54:44 -04:00			`// The pyboard has a 32kHz crystal for the RTC`
			`#define MICROPY_HW_RTC_USE_LSE (1)`

stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18 11:12:57 -04:00			`// X-skin: X9=PB6=SCL, X10=PB7=SDA`
			`#define MICROPY_HW_I2C1_SCL (pin_B6)`
			`#define MICROPY_HW_I2C1_SDA (pin_B7)`

			`// Y-skin: Y9=PB10=SCL, Y10=PB11=SDA`
			`#define MICROPY_HW_I2C2_SCL (pin_B10)`
			`#define MICROPY_HW_I2C2_SDA (pin_B11)`

stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 07:30:35 -04:00			`// USRSW has no pullup or pulldown, and pressing the switch makes the input go low`
			`#define MICROPY_HW_USRSW_PIN (pin_A13)`
			`#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP)`
			`#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING)`
			`#define MICROPY_HW_USRSW_PRESSED (0)`

			`// LEDs`
			`#define MICROPY_HW_LED1 (pin_A8) // R1 - red`
			`#define MICROPY_HW_LED2 (pin_A10) // R2 - red`
			`#define MICROPY_HW_LED3 (pin_C4) // G1 - green`
			`#define MICROPY_HW_LED4 (pin_C5) // G2 - green`
			`#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_PP)`
			`#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRH = pin->pin_mask)`
			`#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRL = pin->pin_mask)`

			`// SD card detect switch`
			`#define MICROPY_HW_SDCARD_DETECT_PIN (pin_C13)`
			`#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLDOWN)`
			`#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_SET)`
stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it Since all currently supported boards use pin A9 for this function, the value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used, just the fact that it is defined. Addresses issue #1048. 2015-01-07 18:54:57 -05:00
			`// USB VBUS detect pin`
			`#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)`