djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8b27482692
circuitpython/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

30 lines
953 B
Makefile
Raw Normal View History

mimxrt: Add MIMXRT1010 board.
2020-01-29 22:40:34 -05:00
MCU_SERIES = MIMXRT1011
MCU_VARIANT = MIMXRT1011DAE5A
mimxrt: Add floating point support. Since not all boards support double fp, all board specific .mk files are affected too.
2021-05-26 05:29:34 -04:00
MICROPY_FLOAT_IMPL = single
mimxrt/sdcard: Implement SDCard driver. - Configures `PLL2->PFD0` with **198MHz** as base clock of `USDHCx` peripheral. - Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD` - Adds creation of pin defines for SDCard to make-pins.py - Adds new configuration option for SDCard peripheral pinout to mpconfigport.h - Adds interrupt handling support instead of polling - Adds support for `ADMA2` powered data transfer - Configures SDCard to run in HS (high-speed mode) with **50MHz** only! SDCard support is optional and requires `USDHC` peripheral. Thus this driver is not available on `MIMXRT1010_EVK`. SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1` in mpconfigboard.mk. Signed-off-by: Philipp Ebensberger
2021-08-01 05:20:39 -04:00
MICROPY_PY_MACHINE_SDCARD = 0
mimxrt/boards: Remove conditional assignment of flash type/size. Removes conditional assignment because respective variables should only be set in board makefile fragments. Hence no conditional assignment needed.
2022-06-23 13:00:54 -04:00
MICROPY_HW_FLASH_TYPE = qspi_nor_flash
MICROPY_HW_FLASH_SIZE = 0x1000000 # 16MB
mimxrt: Add floating point support. Since not all boards support double fp, all board specific .mk files are affected too.
2021-05-26 05:29:34 -04:00
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
JLINK_PATH ?= /media/RT1010-EVK/
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 10:03:21 -04:00
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
JLINK_CONNECTION_SETTINGS = -USB
endif
deploy_jlink: $(BUILD)/firmware.hex
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "speed auto" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "r" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "st" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "loadfile \"$(realpath $(BUILD)/firmware.hex)\"" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "qc" >> $(JLINK_COMMANDER_SCRIPT)
$(JLINK_PATH)JLinkExe -device $(MCU_VARIANT) -if SWD $(JLINK_CONNECTION_SETTINGS) -CommanderScript $(JLINK_COMMANDER_SCRIPT)
mimxrt: Add MIMXRT1010 board.
2020-01-29 22:40:34 -05:00
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)
Reference in New Issue Copy Permalink