88 lines
2.3 KiB
Python
88 lines
2.3 KiB
Python
|
'''
|
||
|
|
UART test fro the CC3200 based boards.
|
||
|
|
UART0 and UART1 must be connected together for this test to pass.
|
||
|
|
'''
|
||
|
|
|
||
|
|
from pyb import UART
|
||
|
|
from pyb import Pin
|
||
|
|
import os
|
||
|
|
|
||
|
|
machine = os.uname().machine
|
||
|
|
if 'LaunchPad' in machine:
|
||
|
|
uart_id_range = range(0, 2)
|
||
|
|
uart_pins = [[('GP12', 'GP13'), ('GP12', 'GP13', 'GP7', 'GP6')], [('GP16', 'GP17'), ('GP16', 'GP17', 'GP7', 'GP6')]]
|
||
|
|
elif 'WiPy' in machine:
|
||
|
|
uart_id_range = range(0, 2)
|
||
|
|
uart_pins = [[('GP12', 'GP13'), ('GP12', 'GP13', 'GP7', 'GP6')], [('GP16', 'GP17'), ('GP16', 'GP17', 'GP7', 'GP6')]]
|
||
|
|
else:
|
||
|
|
raise Exception('Board not supported!')
|
||
|
|
|
||
|
|
for uart_id in uart_id_range:
|
||
|
|
uart = UART(uart_id, 38400)
|
||
|
|
print(uart)
|
||
|
|
uart.init(baudrate=57600, stop=1, parity=None, pins=uart_pins[uart_id][0])
|
||
|
|
uart.init(baudrate=9600, stop=2, parity=0, pins=uart_pins[uart_id][1])
|
||
|
|
uart.init(baudrate=115200, parity=1, pins=uart_pins[uart_id][0])
|
||
|
|
uart.sendbreak()
|
||
|
|
|
||
|
|
# assign GP1, GP2, GP3 and GP4 back to GPIO mode
|
||
|
|
Pin('GP1', mode=Pin.IN)
|
||
|
|
Pin('GP2', mode=Pin.IN)
|
||
|
|
Pin('GP3', mode=Pin.IN)
|
||
|
|
Pin('GP4', mode=Pin.IN)
|
||
|
|
|
||
|
|
# now it's time for some loopback tests between the uarts
|
||
|
|
uart0 = UART(0, 1000000, pins=uart_pins[0][0])
|
||
|
|
print(uart0)
|
||
|
|
uart1 = UART(1, 1000000, pins=uart_pins[1][0])
|
||
|
|
print(uart1)
|
||
|
|
|
||
|
|
print(uart0.write(b'123456') == 6)
|
||
|
|
print(uart1.read() == b'123456')
|
||
|
|
|
||
|
|
print(uart1.write(b'123') == 3)
|
||
|
|
print(uart0.read(1) == b'1')
|
||
|
|
print(uart0.read(2) == b'23')
|
||
|
|
print(uart0.read() == b'')
|
||
|
|
|
||
|
|
uart0.write(b'123')
|
||
|
|
buf = bytearray(3)
|
||
|
|
print(uart1.readinto(buf, 1) == 1)
|
||
|
|
print(buf)
|
||
|
|
print(uart1.readinto(buf) == 2)
|
||
|
|
print(buf)
|
||
|
|
|
||
|
|
uart0.write(b'123')
|
||
|
|
print(uart1.any() > 0)
|
||
|
|
print(uart1.readline() == b'123')
|
||
|
|
print(uart1.any() == 0)
|
||
|
|
|
||
|
|
uart0.write(b'1234567890')
|
||
|
|
print(uart1.readall() == b'1234567890')
|
||
|
|
|
||
|
|
# tx only mode
|
||
|
|
Pin('GP13', mode=Pin.IN)
|
||
|
|
uart0 = UART(0, 1000000, pins=('GP12', None))
|
||
|
|
print(uart0.write(b'123456') == 6)
|
||
|
|
print(uart1.read() == b'123456')
|
||
|
|
print(uart1.write(b'123') == 3)
|
||
|
|
print(uart0.read() == b'')
|
||
|
|
|
||
|
|
# rx only mode
|
||
|
|
Pin('GP12', mode=Pin.IN)
|
||
|
|
uart0 = UART(0, 1000000, pins=(None, 'GP13'))
|
||
|
|
print(uart0.write(b'123456') == 6)
|
||
|
|
print(uart1.read() == b'')
|
||
|
|
print(uart1.write(b'123') == 3)
|
||
|
|
print(uart0.read() == b'123')
|
||
|
|
|
||
|
|
# next ones must raise
|
||
|
|
try:
|
||
|
|
UART(0, 9600, parity=2, pins=('GP12', 'GP13', 'GP7'))
|
||
|
|
except Exception:
|
||
|
|
print('Exception')
|
||
|
|
try:
|
||
|
|
UART(0, 9600, parity=2, pins=('GP12', 'GP7'))
|
||
|
|
except Exception:
|
||
|
|
print('Exception')
|