circuitpython/atmel-samd/asf4_conf/samd51/hpl_tc_config.h

210 lines
6.3 KiB
C
Raw Normal View History

/* Auto-generated config file hpl_tc_config.h */
#ifndef HPL_TC_CONFIG_H
#define HPL_TC_CONFIG_H
// <<< Use Configuration Wizard in Context Menu >>>
#include <peripheral_clk_config.h>
#ifndef CONF_TC0_ENABLE
#define CONF_TC0_ENABLE 1
#endif
// <h> Basic settings
// <o> Prescaler
// <0=> No division
// <1=> Divide by 2
// <2=> Divide by 4
// <3=> Divide by 8
// <4=> Divide by 16
// <5=> Divide by 64
// <6=> Divide by 256
// <7=> Divide by 1024
// <i> This defines the prescaler value
// <id> tc_prescaler
#ifndef CONF_TC0_PRESCALER
#define CONF_TC0_PRESCALER 0
#endif
// </h>
// <h> PWM Waveform Output settings
// <o> Waveform Period Value (uS) <0x00-0xFFFFFFFF>
// <i> The unit of this value is us.
// <id> tc_arch_wave_per_val
#ifndef CONF_TC0_WAVE_PER_VAL
#define CONF_TC0_WAVE_PER_VAL 0x3e8
#endif
// <o> Waveform Duty Value (0.1%) <0x00-0x03E8>
// <i> The unit of this value is 1/1000.
// <id> tc_arch_wave_duty_val
#ifndef CONF_TC0_WAVE_DUTY_VAL
#define CONF_TC0_WAVE_DUTY_VAL 0x1f4
#endif
/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */
#if CONF_TC0_PRESCALER < TC_CTRLA_PRESCALER_DIV64_Val
#define CONF_TC0_CC0 \
((uint32_t)(((double)CONF_TC0_WAVE_PER_VAL * CONF_GCLK_TC0_FREQUENCY) / 1000000 / (1 << CONF_TC0_PRESCALER) - 1))
#define CONF_TC0_CC1 ((CONF_TC0_CC0 * CONF_TC0_WAVE_DUTY_VAL) / 1000)
#elif CONF_TC0_PRESCALER == TC_CTRLA_PRESCALER_DIV64_Val
#define CONF_TC0_CC0 ((uint32_t)(((double)CONF_TC0_WAVE_PER_VAL * CONF_GCLK_TC0_FREQUENCY) / 64000000 - 1))
#define CONF_TC0_CC1 ((CONF_TC0_CC0 * CONF_TC0_WAVE_DUTY_VAL) / 1000)
#elif CONF_TC0_PRESCALER == TC_CTRLA_PRESCALER_DIV256_Val
#define CONF_TC0_CC0 ((uint32_t)(((double)CONF_TC0_WAVE_PER_VAL * CONF_GCLK_TC0_FREQUENCY) / 256000000 - 1))
#define CONF_TC0_CC1 ((CONF_TC0_CC0 * CONF_TC0_WAVE_DUTY_VAL) / 1000)
#elif CONF_TC0_PRESCALER == TC_CTRLA_PRESCALER_DIV1024_Val
#define CONF_TC0_CC0 ((uint32_t)(((double)CONF_TC0_WAVE_PER_VAL * CONF_GCLK_TC0_FREQUENCY) / 1024000000 - 1))
#define CONF_TC0_CC1 ((CONF_TC0_CC0 * CONF_TC0_WAVE_DUTY_VAL) / 1000)
#endif
// </h>
// <h> Advanced settings
// <y> Mode
// <TC_CTRLA_MODE_COUNT16_Val"> Counter in 16-bit mode
// <TC_CTRLA_MODE_COUNT32_Val"> Counter in 32-bit mode
// <i> These bits mode
// <id> tc_mode
#ifndef CONF_TC0_MODE
#define CONF_TC0_MODE TC_CTRLA_MODE_COUNT16_Val
#endif
// <o> Period Value <0x00000000-0xFFFFFFFF>
// <id> tc_per
#ifndef CONF_TC0_PER
#define CONF_TC0_PER 0x32
#endif
// </h>
// <h> Advanced settings
// <y> Prescaler and Counter Synchronization Selection
// <TC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK
// <TC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock
// <TC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter
// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCx clock or on the next prescaled GCLK_TCx clock.
// <id> tc_arch_presync
#ifndef CONF_TC0_PRESCSYNC
#define CONF_TC0_PRESCSYNC TC_CTRLA_PRESCSYNC_GCLK_Val
#endif
// <q> Run in standby
// <i> Indicates whether the will continue running in standby sleep mode or not
// <id> tc_arch_runstdby
#ifndef CONF_TC0_RUNSTDBY
#define CONF_TC0_RUNSTDBY 0
#endif
// <q> On-Demand
// <i> Indicates whether the TC0's on-demand mode is on or not
// <id> tc_arch_ondemand
#ifndef CONF_TC0_ONDEMAND
#define CONF_TC0_ONDEMAND 0
#endif
// <o> Auto Lock
// <0x0=>The Lock Update bit is not affected on overflow/underflow and re-trigger event
// <0x1=>The Lock Update bit is set on each overflow/underflow or re-trigger event
// <id> tc_arch_alock
#ifndef CONF_TC0_ALOCK
#define CONF_TC0_ALOCK 0
#endif
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_CAPTEN0 0
//#define CONF_TC0_CAPTEN1 0
//#define CONF_TC0_COPEN0 0
//#define CONF_TC0_COPEN1 0
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_DIR 0
//#define CONF_TC0_ONESHOT 0
//#define CONF_TC0_LUPD 0
// <q> Debug Running Mode
// <i> Indicates whether the Debug Running Mode is enabled or not
// <id> tc_arch_dbgrun
#ifndef CONF_TC0_DBGRUN
#define CONF_TC0_DBGRUN 0
#endif
// <e> Event control
// <id> timer_event_control
#ifndef CONF_TC0_EVENT_CONTROL_ENABLE
#define CONF_TC0_EVENT_CONTROL_ENABLE 0
#endif
// <q> Output Event On Match or Capture on Channel 0
// <i> Enable output of event on timer tick
// <id> tc_arch_mceo0
#ifndef CONF_TC0_MCEO0
#define CONF_TC0_MCEO0 0
#endif
// <q> Output Event On Match or Capture on Channel 1
// <i> Enable output of event on timer tick
// <id> tc_arch_mceo1
#ifndef CONF_TC0_MCEO1
#define CONF_TC0_MCEO1 0
#endif
// <q> Output Event On Timer Tick
// <i> Enable output of event on timer tick
// <id> tc_arch_ovfeo
#ifndef CONF_TC0_OVFEO
#define CONF_TC0_OVFEO 0
#endif
// <q> Event Input
// <i> Enable asynchronous input events
// <id> tc_arch_tcei
#ifndef CONF_TC0_TCEI
#define CONF_TC0_TCEI 0
#endif
// <q> Inverted Event Input
// <i> Invert the asynchronous input events
// <id> tc_arch_tcinv
#ifndef CONF_TC0_TCINV
#define CONF_TC0_TCINV 0
#endif
// <o> Event action
// <0=> Event action disabled
// <1=> Start, restart or re-trigger TC on event
// <2=> Count on event
// <3=> Start on event
// <4=> Time stamp capture
// <5=> Period captured in CC0, pulse width in CC1
// <6=> Period captured in CC1, pulse width in CC0
// <7=> Pulse width capture
// <i> Event which will be performed on an event
//<id> tc_arch_evact
#ifndef CONF_TC0_EVACT
#define CONF_TC0_EVACT 0
#endif
// </e>
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_WAVEGEN TC_CTRLA_WAVEGEN_MFRQ_Val
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_INVEN0 0
//#define CONF_TC0_INVEN1 0
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_PERBUF 0
/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
//#define CONF_TC0_CCBUF0 0
//#define CONF_TC0_CCBUF1 0
// </h>
// <<< end of configuration section >>>
#endif // HPL_TC_CONFIG_H