djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8466d760f9
circuitpython/atmel-samd/asf4/samd21/include/component/i2s.h

625 lines
48 KiB
C
Raw Normal View History

Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/**
* \file
*
* \brief Component description for I2S
*
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
* Copyright (c) 2016 Atmel Corporation,
* a wholly owned subsidiary of Microchip Technology Inc.
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
*
* \asf_license_start
*
* \page License
*
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
*
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
* http://www.apache.org/licenses/LICENSE-2.0
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
*
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
*
* \asf_license_stop
*
*/
#ifndef _SAMD21_I2S_COMPONENT_
#define _SAMD21_I2S_COMPONENT_
/* ========================================================================== */
/** SOFTWARE API DEFINITION FOR I2S */
/* ========================================================================== */
/** \addtogroup SAMD21_I2S Inter-IC Sound Interface */
/*@{*/
#define I2S_U2224
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define REV_I2S 0x102
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_CTRLA : (I2S Offset: 0x00) (R/W 8) Control A -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t SWRST:1; /*!< bit: 0 Software Reset */
uint8_t ENABLE:1; /*!< bit: 1 Enable */
uint8_t CKEN0:1; /*!< bit: 2 Clock Unit 0 Enable */
uint8_t CKEN1:1; /*!< bit: 3 Clock Unit 1 Enable */
uint8_t SEREN0:1; /*!< bit: 4 Serializer 0 Enable */
uint8_t SEREN1:1; /*!< bit: 5 Serializer 1 Enable */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint8_t :2; /*!< bit: 0.. 1 Reserved */
uint8_t CKEN:2; /*!< bit: 2.. 3 Clock Unit x Enable */
uint8_t SEREN:2; /*!< bit: 4.. 5 Serializer x Enable */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} I2S_CTRLA_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_CTRLA_OFFSET 0x00 /**< \brief (I2S_CTRLA offset) Control A */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_RESETVALUE _U(0x00) /**< \brief (I2S_CTRLA reset_value) Control A */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CTRLA_SWRST_Pos 0 /**< \brief (I2S_CTRLA) Software Reset */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_SWRST (_U(0x1) << I2S_CTRLA_SWRST_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CTRLA_ENABLE_Pos 1 /**< \brief (I2S_CTRLA) Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_ENABLE (_U(0x1) << I2S_CTRLA_ENABLE_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CTRLA_CKEN0_Pos 2 /**< \brief (I2S_CTRLA) Clock Unit 0 Enable */
#define I2S_CTRLA_CKEN0 (1 << I2S_CTRLA_CKEN0_Pos)
#define I2S_CTRLA_CKEN1_Pos 3 /**< \brief (I2S_CTRLA) Clock Unit 1 Enable */
#define I2S_CTRLA_CKEN1 (1 << I2S_CTRLA_CKEN1_Pos)
#define I2S_CTRLA_CKEN_Pos 2 /**< \brief (I2S_CTRLA) Clock Unit x Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_CKEN_Msk (_U(0x3) << I2S_CTRLA_CKEN_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CTRLA_CKEN(value) (I2S_CTRLA_CKEN_Msk & ((value) << I2S_CTRLA_CKEN_Pos))
#define I2S_CTRLA_SEREN0_Pos 4 /**< \brief (I2S_CTRLA) Serializer 0 Enable */
#define I2S_CTRLA_SEREN0 (1 << I2S_CTRLA_SEREN0_Pos)
#define I2S_CTRLA_SEREN1_Pos 5 /**< \brief (I2S_CTRLA) Serializer 1 Enable */
#define I2S_CTRLA_SEREN1 (1 << I2S_CTRLA_SEREN1_Pos)
#define I2S_CTRLA_SEREN_Pos 4 /**< \brief (I2S_CTRLA) Serializer x Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_SEREN_Msk (_U(0x3) << I2S_CTRLA_SEREN_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CTRLA_SEREN(value) (I2S_CTRLA_SEREN_Msk & ((value) << I2S_CTRLA_SEREN_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CTRLA_MASK _U(0x3F) /**< \brief (I2S_CTRLA) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_CLKCTRL : (I2S Offset: 0x04) (R/W 32) Clock Unit n Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t SLOTSIZE:2; /*!< bit: 0.. 1 Slot Size */
uint32_t NBSLOTS:3; /*!< bit: 2.. 4 Number of Slots in Frame */
uint32_t FSWIDTH:2; /*!< bit: 5.. 6 Frame Sync Width */
uint32_t BITDELAY:1; /*!< bit: 7 Data Delay from Frame Sync */
uint32_t FSSEL:1; /*!< bit: 8 Frame Sync Select */
uint32_t :2; /*!< bit: 9..10 Reserved */
uint32_t FSINV:1; /*!< bit: 11 Frame Sync Invert */
uint32_t SCKSEL:1; /*!< bit: 12 Serial Clock Select */
uint32_t :3; /*!< bit: 13..15 Reserved */
uint32_t MCKSEL:1; /*!< bit: 16 Master Clock Select */
uint32_t :1; /*!< bit: 17 Reserved */
uint32_t MCKEN:1; /*!< bit: 18 Master Clock Enable */
uint32_t MCKDIV:5; /*!< bit: 19..23 Master Clock Division Factor */
uint32_t MCKOUTDIV:5; /*!< bit: 24..28 Master Clock Output Division Factor */
uint32_t FSOUTINV:1; /*!< bit: 29 Frame Sync Output Invert */
uint32_t SCKOUTINV:1; /*!< bit: 30 Serial Clock Output Invert */
uint32_t MCKOUTINV:1; /*!< bit: 31 Master Clock Output Invert */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} I2S_CLKCTRL_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_CLKCTRL_OFFSET 0x04 /**< \brief (I2S_CLKCTRL offset) Clock Unit n Control */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_RESETVALUE _U(0x00000000) /**< \brief (I2S_CLKCTRL reset_value) Clock Unit n Control */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SLOTSIZE_Pos 0 /**< \brief (I2S_CLKCTRL) Slot Size */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_SLOTSIZE_Msk (_U(0x3) << I2S_CLKCTRL_SLOTSIZE_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SLOTSIZE(value) (I2S_CLKCTRL_SLOTSIZE_Msk & ((value) << I2S_CLKCTRL_SLOTSIZE_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_SLOTSIZE_8_Val _U(0x0) /**< \brief (I2S_CLKCTRL) 8-bit Slot for Clock Unit n */
#define I2S_CLKCTRL_SLOTSIZE_16_Val _U(0x1) /**< \brief (I2S_CLKCTRL) 16-bit Slot for Clock Unit n */
#define I2S_CLKCTRL_SLOTSIZE_24_Val _U(0x2) /**< \brief (I2S_CLKCTRL) 24-bit Slot for Clock Unit n */
#define I2S_CLKCTRL_SLOTSIZE_32_Val _U(0x3) /**< \brief (I2S_CLKCTRL) 32-bit Slot for Clock Unit n */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SLOTSIZE_8 (I2S_CLKCTRL_SLOTSIZE_8_Val << I2S_CLKCTRL_SLOTSIZE_Pos)
#define I2S_CLKCTRL_SLOTSIZE_16 (I2S_CLKCTRL_SLOTSIZE_16_Val << I2S_CLKCTRL_SLOTSIZE_Pos)
#define I2S_CLKCTRL_SLOTSIZE_24 (I2S_CLKCTRL_SLOTSIZE_24_Val << I2S_CLKCTRL_SLOTSIZE_Pos)
#define I2S_CLKCTRL_SLOTSIZE_32 (I2S_CLKCTRL_SLOTSIZE_32_Val << I2S_CLKCTRL_SLOTSIZE_Pos)
#define I2S_CLKCTRL_NBSLOTS_Pos 2 /**< \brief (I2S_CLKCTRL) Number of Slots in Frame */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_NBSLOTS_Msk (_U(0x7) << I2S_CLKCTRL_NBSLOTS_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_NBSLOTS(value) (I2S_CLKCTRL_NBSLOTS_Msk & ((value) << I2S_CLKCTRL_NBSLOTS_Pos))
#define I2S_CLKCTRL_FSWIDTH_Pos 5 /**< \brief (I2S_CLKCTRL) Frame Sync Width */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_FSWIDTH_Msk (_U(0x3) << I2S_CLKCTRL_FSWIDTH_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_FSWIDTH(value) (I2S_CLKCTRL_FSWIDTH_Msk & ((value) << I2S_CLKCTRL_FSWIDTH_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_FSWIDTH_SLOT_Val _U(0x0) /**< \brief (I2S_CLKCTRL) Frame Sync Pulse is 1 Slot wide (default for I2S protocol) */
#define I2S_CLKCTRL_FSWIDTH_HALF_Val _U(0x1) /**< \brief (I2S_CLKCTRL) Frame Sync Pulse is half a Frame wide */
#define I2S_CLKCTRL_FSWIDTH_BIT_Val _U(0x2) /**< \brief (I2S_CLKCTRL) Frame Sync Pulse is 1 Bit wide */
#define I2S_CLKCTRL_FSWIDTH_BURST_Val _U(0x3) /**< \brief (I2S_CLKCTRL) Clock Unit n operates in Burst mode, with a 1-bit wide Frame Sync pulse per Data sample, only when Data transfer is requested */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_FSWIDTH_SLOT (I2S_CLKCTRL_FSWIDTH_SLOT_Val << I2S_CLKCTRL_FSWIDTH_Pos)
#define I2S_CLKCTRL_FSWIDTH_HALF (I2S_CLKCTRL_FSWIDTH_HALF_Val << I2S_CLKCTRL_FSWIDTH_Pos)
#define I2S_CLKCTRL_FSWIDTH_BIT (I2S_CLKCTRL_FSWIDTH_BIT_Val << I2S_CLKCTRL_FSWIDTH_Pos)
#define I2S_CLKCTRL_FSWIDTH_BURST (I2S_CLKCTRL_FSWIDTH_BURST_Val << I2S_CLKCTRL_FSWIDTH_Pos)
#define I2S_CLKCTRL_BITDELAY_Pos 7 /**< \brief (I2S_CLKCTRL) Data Delay from Frame Sync */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_BITDELAY (_U(0x1) << I2S_CLKCTRL_BITDELAY_Pos)
#define I2S_CLKCTRL_BITDELAY_LJ_Val _U(0x0) /**< \brief (I2S_CLKCTRL) Left Justified (0 Bit Delay) */
#define I2S_CLKCTRL_BITDELAY_I2S_Val _U(0x1) /**< \brief (I2S_CLKCTRL) I2S (1 Bit Delay) */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_BITDELAY_LJ (I2S_CLKCTRL_BITDELAY_LJ_Val << I2S_CLKCTRL_BITDELAY_Pos)
#define I2S_CLKCTRL_BITDELAY_I2S (I2S_CLKCTRL_BITDELAY_I2S_Val << I2S_CLKCTRL_BITDELAY_Pos)
#define I2S_CLKCTRL_FSSEL_Pos 8 /**< \brief (I2S_CLKCTRL) Frame Sync Select */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_FSSEL (_U(0x1) << I2S_CLKCTRL_FSSEL_Pos)
#define I2S_CLKCTRL_FSSEL_SCKDIV_Val _U(0x0) /**< \brief (I2S_CLKCTRL) Divided Serial Clock n is used as Frame Sync n source */
#define I2S_CLKCTRL_FSSEL_FSPIN_Val _U(0x1) /**< \brief (I2S_CLKCTRL) FSn input pin is used as Frame Sync n source */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_FSSEL_SCKDIV (I2S_CLKCTRL_FSSEL_SCKDIV_Val << I2S_CLKCTRL_FSSEL_Pos)
#define I2S_CLKCTRL_FSSEL_FSPIN (I2S_CLKCTRL_FSSEL_FSPIN_Val << I2S_CLKCTRL_FSSEL_Pos)
#define I2S_CLKCTRL_FSINV_Pos 11 /**< \brief (I2S_CLKCTRL) Frame Sync Invert */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_FSINV (_U(0x1) << I2S_CLKCTRL_FSINV_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SCKSEL_Pos 12 /**< \brief (I2S_CLKCTRL) Serial Clock Select */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_SCKSEL (_U(0x1) << I2S_CLKCTRL_SCKSEL_Pos)
#define I2S_CLKCTRL_SCKSEL_MCKDIV_Val _U(0x0) /**< \brief (I2S_CLKCTRL) Divided Master Clock n is used as Serial Clock n source */
#define I2S_CLKCTRL_SCKSEL_SCKPIN_Val _U(0x1) /**< \brief (I2S_CLKCTRL) SCKn input pin is used as Serial Clock n source */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SCKSEL_MCKDIV (I2S_CLKCTRL_SCKSEL_MCKDIV_Val << I2S_CLKCTRL_SCKSEL_Pos)
#define I2S_CLKCTRL_SCKSEL_SCKPIN (I2S_CLKCTRL_SCKSEL_SCKPIN_Val << I2S_CLKCTRL_SCKSEL_Pos)
#define I2S_CLKCTRL_MCKSEL_Pos 16 /**< \brief (I2S_CLKCTRL) Master Clock Select */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_MCKSEL (_U(0x1) << I2S_CLKCTRL_MCKSEL_Pos)
#define I2S_CLKCTRL_MCKSEL_GCLK_Val _U(0x0) /**< \brief (I2S_CLKCTRL) GCLK_I2S_n is used as Master Clock n source */
#define I2S_CLKCTRL_MCKSEL_MCKPIN_Val _U(0x1) /**< \brief (I2S_CLKCTRL) MCKn input pin is used as Master Clock n source */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_MCKSEL_GCLK (I2S_CLKCTRL_MCKSEL_GCLK_Val << I2S_CLKCTRL_MCKSEL_Pos)
#define I2S_CLKCTRL_MCKSEL_MCKPIN (I2S_CLKCTRL_MCKSEL_MCKPIN_Val << I2S_CLKCTRL_MCKSEL_Pos)
#define I2S_CLKCTRL_MCKEN_Pos 18 /**< \brief (I2S_CLKCTRL) Master Clock Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_MCKEN (_U(0x1) << I2S_CLKCTRL_MCKEN_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_MCKDIV_Pos 19 /**< \brief (I2S_CLKCTRL) Master Clock Division Factor */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_MCKDIV_Msk (_U(0x1F) << I2S_CLKCTRL_MCKDIV_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_MCKDIV(value) (I2S_CLKCTRL_MCKDIV_Msk & ((value) << I2S_CLKCTRL_MCKDIV_Pos))
#define I2S_CLKCTRL_MCKOUTDIV_Pos 24 /**< \brief (I2S_CLKCTRL) Master Clock Output Division Factor */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_MCKOUTDIV_Msk (_U(0x1F) << I2S_CLKCTRL_MCKOUTDIV_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_MCKOUTDIV(value) (I2S_CLKCTRL_MCKOUTDIV_Msk & ((value) << I2S_CLKCTRL_MCKOUTDIV_Pos))
#define I2S_CLKCTRL_FSOUTINV_Pos 29 /**< \brief (I2S_CLKCTRL) Frame Sync Output Invert */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_FSOUTINV (_U(0x1) << I2S_CLKCTRL_FSOUTINV_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_SCKOUTINV_Pos 30 /**< \brief (I2S_CLKCTRL) Serial Clock Output Invert */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_SCKOUTINV (_U(0x1) << I2S_CLKCTRL_SCKOUTINV_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_CLKCTRL_MCKOUTINV_Pos 31 /**< \brief (I2S_CLKCTRL) Master Clock Output Invert */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_CLKCTRL_MCKOUTINV (_U(0x1) << I2S_CLKCTRL_MCKOUTINV_Pos)
#define I2S_CLKCTRL_MASK _U(0xFFFD19FF) /**< \brief (I2S_CLKCTRL) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_INTENCLR : (I2S Offset: 0x0C) (R/W 16) Interrupt Enable Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t RXRDY0:1; /*!< bit: 0 Receive Ready 0 Interrupt Enable */
uint16_t RXRDY1:1; /*!< bit: 1 Receive Ready 1 Interrupt Enable */
uint16_t :2; /*!< bit: 2.. 3 Reserved */
uint16_t RXOR0:1; /*!< bit: 4 Receive Overrun 0 Interrupt Enable */
uint16_t RXOR1:1; /*!< bit: 5 Receive Overrun 1 Interrupt Enable */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t TXRDY0:1; /*!< bit: 8 Transmit Ready 0 Interrupt Enable */
uint16_t TXRDY1:1; /*!< bit: 9 Transmit Ready 1 Interrupt Enable */
uint16_t :2; /*!< bit: 10..11 Reserved */
uint16_t TXUR0:1; /*!< bit: 12 Transmit Underrun 0 Interrupt Enable */
uint16_t TXUR1:1; /*!< bit: 13 Transmit Underrun 1 Interrupt Enable */
uint16_t :2; /*!< bit: 14..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint16_t RXRDY:2; /*!< bit: 0.. 1 Receive Ready x Interrupt Enable */
uint16_t :2; /*!< bit: 2.. 3 Reserved */
uint16_t RXOR:2; /*!< bit: 4.. 5 Receive Overrun x Interrupt Enable */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t TXRDY:2; /*!< bit: 8.. 9 Transmit Ready x Interrupt Enable */
uint16_t :2; /*!< bit: 10..11 Reserved */
uint16_t TXUR:2; /*!< bit: 12..13 Transmit Underrun x Interrupt Enable */
uint16_t :2; /*!< bit: 14..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} I2S_INTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_INTENCLR_OFFSET 0x0C /**< \brief (I2S_INTENCLR offset) Interrupt Enable Clear */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_RESETVALUE _U(0x0000) /**< \brief (I2S_INTENCLR reset_value) Interrupt Enable Clear */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENCLR_RXRDY0_Pos 0 /**< \brief (I2S_INTENCLR) Receive Ready 0 Interrupt Enable */
#define I2S_INTENCLR_RXRDY0 (1 << I2S_INTENCLR_RXRDY0_Pos)
#define I2S_INTENCLR_RXRDY1_Pos 1 /**< \brief (I2S_INTENCLR) Receive Ready 1 Interrupt Enable */
#define I2S_INTENCLR_RXRDY1 (1 << I2S_INTENCLR_RXRDY1_Pos)
#define I2S_INTENCLR_RXRDY_Pos 0 /**< \brief (I2S_INTENCLR) Receive Ready x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_RXRDY_Msk (_U(0x3) << I2S_INTENCLR_RXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENCLR_RXRDY(value) (I2S_INTENCLR_RXRDY_Msk & ((value) << I2S_INTENCLR_RXRDY_Pos))
#define I2S_INTENCLR_RXOR0_Pos 4 /**< \brief (I2S_INTENCLR) Receive Overrun 0 Interrupt Enable */
#define I2S_INTENCLR_RXOR0 (1 << I2S_INTENCLR_RXOR0_Pos)
#define I2S_INTENCLR_RXOR1_Pos 5 /**< \brief (I2S_INTENCLR) Receive Overrun 1 Interrupt Enable */
#define I2S_INTENCLR_RXOR1 (1 << I2S_INTENCLR_RXOR1_Pos)
#define I2S_INTENCLR_RXOR_Pos 4 /**< \brief (I2S_INTENCLR) Receive Overrun x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_RXOR_Msk (_U(0x3) << I2S_INTENCLR_RXOR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENCLR_RXOR(value) (I2S_INTENCLR_RXOR_Msk & ((value) << I2S_INTENCLR_RXOR_Pos))
#define I2S_INTENCLR_TXRDY0_Pos 8 /**< \brief (I2S_INTENCLR) Transmit Ready 0 Interrupt Enable */
#define I2S_INTENCLR_TXRDY0 (1 << I2S_INTENCLR_TXRDY0_Pos)
#define I2S_INTENCLR_TXRDY1_Pos 9 /**< \brief (I2S_INTENCLR) Transmit Ready 1 Interrupt Enable */
#define I2S_INTENCLR_TXRDY1 (1 << I2S_INTENCLR_TXRDY1_Pos)
#define I2S_INTENCLR_TXRDY_Pos 8 /**< \brief (I2S_INTENCLR) Transmit Ready x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_TXRDY_Msk (_U(0x3) << I2S_INTENCLR_TXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENCLR_TXRDY(value) (I2S_INTENCLR_TXRDY_Msk & ((value) << I2S_INTENCLR_TXRDY_Pos))
#define I2S_INTENCLR_TXUR0_Pos 12 /**< \brief (I2S_INTENCLR) Transmit Underrun 0 Interrupt Enable */
#define I2S_INTENCLR_TXUR0 (1 << I2S_INTENCLR_TXUR0_Pos)
#define I2S_INTENCLR_TXUR1_Pos 13 /**< \brief (I2S_INTENCLR) Transmit Underrun 1 Interrupt Enable */
#define I2S_INTENCLR_TXUR1 (1 << I2S_INTENCLR_TXUR1_Pos)
#define I2S_INTENCLR_TXUR_Pos 12 /**< \brief (I2S_INTENCLR) Transmit Underrun x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_TXUR_Msk (_U(0x3) << I2S_INTENCLR_TXUR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENCLR_TXUR(value) (I2S_INTENCLR_TXUR_Msk & ((value) << I2S_INTENCLR_TXUR_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENCLR_MASK _U(0x3333) /**< \brief (I2S_INTENCLR) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_INTENSET : (I2S Offset: 0x10) (R/W 16) Interrupt Enable Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t RXRDY0:1; /*!< bit: 0 Receive Ready 0 Interrupt Enable */
uint16_t RXRDY1:1; /*!< bit: 1 Receive Ready 1 Interrupt Enable */
uint16_t :2; /*!< bit: 2.. 3 Reserved */
uint16_t RXOR0:1; /*!< bit: 4 Receive Overrun 0 Interrupt Enable */
uint16_t RXOR1:1; /*!< bit: 5 Receive Overrun 1 Interrupt Enable */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t TXRDY0:1; /*!< bit: 8 Transmit Ready 0 Interrupt Enable */
uint16_t TXRDY1:1; /*!< bit: 9 Transmit Ready 1 Interrupt Enable */
uint16_t :2; /*!< bit: 10..11 Reserved */
uint16_t TXUR0:1; /*!< bit: 12 Transmit Underrun 0 Interrupt Enable */
uint16_t TXUR1:1; /*!< bit: 13 Transmit Underrun 1 Interrupt Enable */
uint16_t :2; /*!< bit: 14..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint16_t RXRDY:2; /*!< bit: 0.. 1 Receive Ready x Interrupt Enable */
uint16_t :2; /*!< bit: 2.. 3 Reserved */
uint16_t RXOR:2; /*!< bit: 4.. 5 Receive Overrun x Interrupt Enable */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t TXRDY:2; /*!< bit: 8.. 9 Transmit Ready x Interrupt Enable */
uint16_t :2; /*!< bit: 10..11 Reserved */
uint16_t TXUR:2; /*!< bit: 12..13 Transmit Underrun x Interrupt Enable */
uint16_t :2; /*!< bit: 14..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} I2S_INTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_INTENSET_OFFSET 0x10 /**< \brief (I2S_INTENSET offset) Interrupt Enable Set */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_RESETVALUE _U(0x0000) /**< \brief (I2S_INTENSET reset_value) Interrupt Enable Set */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENSET_RXRDY0_Pos 0 /**< \brief (I2S_INTENSET) Receive Ready 0 Interrupt Enable */
#define I2S_INTENSET_RXRDY0 (1 << I2S_INTENSET_RXRDY0_Pos)
#define I2S_INTENSET_RXRDY1_Pos 1 /**< \brief (I2S_INTENSET) Receive Ready 1 Interrupt Enable */
#define I2S_INTENSET_RXRDY1 (1 << I2S_INTENSET_RXRDY1_Pos)
#define I2S_INTENSET_RXRDY_Pos 0 /**< \brief (I2S_INTENSET) Receive Ready x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_RXRDY_Msk (_U(0x3) << I2S_INTENSET_RXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENSET_RXRDY(value) (I2S_INTENSET_RXRDY_Msk & ((value) << I2S_INTENSET_RXRDY_Pos))
#define I2S_INTENSET_RXOR0_Pos 4 /**< \brief (I2S_INTENSET) Receive Overrun 0 Interrupt Enable */
#define I2S_INTENSET_RXOR0 (1 << I2S_INTENSET_RXOR0_Pos)
#define I2S_INTENSET_RXOR1_Pos 5 /**< \brief (I2S_INTENSET) Receive Overrun 1 Interrupt Enable */
#define I2S_INTENSET_RXOR1 (1 << I2S_INTENSET_RXOR1_Pos)
#define I2S_INTENSET_RXOR_Pos 4 /**< \brief (I2S_INTENSET) Receive Overrun x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_RXOR_Msk (_U(0x3) << I2S_INTENSET_RXOR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENSET_RXOR(value) (I2S_INTENSET_RXOR_Msk & ((value) << I2S_INTENSET_RXOR_Pos))
#define I2S_INTENSET_TXRDY0_Pos 8 /**< \brief (I2S_INTENSET) Transmit Ready 0 Interrupt Enable */
#define I2S_INTENSET_TXRDY0 (1 << I2S_INTENSET_TXRDY0_Pos)
#define I2S_INTENSET_TXRDY1_Pos 9 /**< \brief (I2S_INTENSET) Transmit Ready 1 Interrupt Enable */
#define I2S_INTENSET_TXRDY1 (1 << I2S_INTENSET_TXRDY1_Pos)
#define I2S_INTENSET_TXRDY_Pos 8 /**< \brief (I2S_INTENSET) Transmit Ready x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_TXRDY_Msk (_U(0x3) << I2S_INTENSET_TXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENSET_TXRDY(value) (I2S_INTENSET_TXRDY_Msk & ((value) << I2S_INTENSET_TXRDY_Pos))
#define I2S_INTENSET_TXUR0_Pos 12 /**< \brief (I2S_INTENSET) Transmit Underrun 0 Interrupt Enable */
#define I2S_INTENSET_TXUR0 (1 << I2S_INTENSET_TXUR0_Pos)
#define I2S_INTENSET_TXUR1_Pos 13 /**< \brief (I2S_INTENSET) Transmit Underrun 1 Interrupt Enable */
#define I2S_INTENSET_TXUR1 (1 << I2S_INTENSET_TXUR1_Pos)
#define I2S_INTENSET_TXUR_Pos 12 /**< \brief (I2S_INTENSET) Transmit Underrun x Interrupt Enable */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_TXUR_Msk (_U(0x3) << I2S_INTENSET_TXUR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTENSET_TXUR(value) (I2S_INTENSET_TXUR_Msk & ((value) << I2S_INTENSET_TXUR_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTENSET_MASK _U(0x3333) /**< \brief (I2S_INTENSET) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_INTFLAG : (I2S Offset: 0x14) (R/W 16) Interrupt Flag Status and Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union { // __I to avoid read-modify-write on write-to-clear register
struct {
__I uint16_t RXRDY0:1; /*!< bit: 0 Receive Ready 0 */
__I uint16_t RXRDY1:1; /*!< bit: 1 Receive Ready 1 */
__I uint16_t :2; /*!< bit: 2.. 3 Reserved */
__I uint16_t RXOR0:1; /*!< bit: 4 Receive Overrun 0 */
__I uint16_t RXOR1:1; /*!< bit: 5 Receive Overrun 1 */
__I uint16_t :2; /*!< bit: 6.. 7 Reserved */
__I uint16_t TXRDY0:1; /*!< bit: 8 Transmit Ready 0 */
__I uint16_t TXRDY1:1; /*!< bit: 9 Transmit Ready 1 */
__I uint16_t :2; /*!< bit: 10..11 Reserved */
__I uint16_t TXUR0:1; /*!< bit: 12 Transmit Underrun 0 */
__I uint16_t TXUR1:1; /*!< bit: 13 Transmit Underrun 1 */
__I uint16_t :2; /*!< bit: 14..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
__I uint16_t RXRDY:2; /*!< bit: 0.. 1 Receive Ready x */
__I uint16_t :2; /*!< bit: 2.. 3 Reserved */
__I uint16_t RXOR:2; /*!< bit: 4.. 5 Receive Overrun x */
__I uint16_t :2; /*!< bit: 6.. 7 Reserved */
__I uint16_t TXRDY:2; /*!< bit: 8.. 9 Transmit Ready x */
__I uint16_t :2; /*!< bit: 10..11 Reserved */
__I uint16_t TXUR:2; /*!< bit: 12..13 Transmit Underrun x */
__I uint16_t :2; /*!< bit: 14..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} I2S_INTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_INTFLAG_OFFSET 0x14 /**< \brief (I2S_INTFLAG offset) Interrupt Flag Status and Clear */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_RESETVALUE _U(0x0000) /**< \brief (I2S_INTFLAG reset_value) Interrupt Flag Status and Clear */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTFLAG_RXRDY0_Pos 0 /**< \brief (I2S_INTFLAG) Receive Ready 0 */
#define I2S_INTFLAG_RXRDY0 (1 << I2S_INTFLAG_RXRDY0_Pos)
#define I2S_INTFLAG_RXRDY1_Pos 1 /**< \brief (I2S_INTFLAG) Receive Ready 1 */
#define I2S_INTFLAG_RXRDY1 (1 << I2S_INTFLAG_RXRDY1_Pos)
#define I2S_INTFLAG_RXRDY_Pos 0 /**< \brief (I2S_INTFLAG) Receive Ready x */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_RXRDY_Msk (_U(0x3) << I2S_INTFLAG_RXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTFLAG_RXRDY(value) (I2S_INTFLAG_RXRDY_Msk & ((value) << I2S_INTFLAG_RXRDY_Pos))
#define I2S_INTFLAG_RXOR0_Pos 4 /**< \brief (I2S_INTFLAG) Receive Overrun 0 */
#define I2S_INTFLAG_RXOR0 (1 << I2S_INTFLAG_RXOR0_Pos)
#define I2S_INTFLAG_RXOR1_Pos 5 /**< \brief (I2S_INTFLAG) Receive Overrun 1 */
#define I2S_INTFLAG_RXOR1 (1 << I2S_INTFLAG_RXOR1_Pos)
#define I2S_INTFLAG_RXOR_Pos 4 /**< \brief (I2S_INTFLAG) Receive Overrun x */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_RXOR_Msk (_U(0x3) << I2S_INTFLAG_RXOR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTFLAG_RXOR(value) (I2S_INTFLAG_RXOR_Msk & ((value) << I2S_INTFLAG_RXOR_Pos))
#define I2S_INTFLAG_TXRDY0_Pos 8 /**< \brief (I2S_INTFLAG) Transmit Ready 0 */
#define I2S_INTFLAG_TXRDY0 (1 << I2S_INTFLAG_TXRDY0_Pos)
#define I2S_INTFLAG_TXRDY1_Pos 9 /**< \brief (I2S_INTFLAG) Transmit Ready 1 */
#define I2S_INTFLAG_TXRDY1 (1 << I2S_INTFLAG_TXRDY1_Pos)
#define I2S_INTFLAG_TXRDY_Pos 8 /**< \brief (I2S_INTFLAG) Transmit Ready x */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_TXRDY_Msk (_U(0x3) << I2S_INTFLAG_TXRDY_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTFLAG_TXRDY(value) (I2S_INTFLAG_TXRDY_Msk & ((value) << I2S_INTFLAG_TXRDY_Pos))
#define I2S_INTFLAG_TXUR0_Pos 12 /**< \brief (I2S_INTFLAG) Transmit Underrun 0 */
#define I2S_INTFLAG_TXUR0 (1 << I2S_INTFLAG_TXUR0_Pos)
#define I2S_INTFLAG_TXUR1_Pos 13 /**< \brief (I2S_INTFLAG) Transmit Underrun 1 */
#define I2S_INTFLAG_TXUR1 (1 << I2S_INTFLAG_TXUR1_Pos)
#define I2S_INTFLAG_TXUR_Pos 12 /**< \brief (I2S_INTFLAG) Transmit Underrun x */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_TXUR_Msk (_U(0x3) << I2S_INTFLAG_TXUR_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_INTFLAG_TXUR(value) (I2S_INTFLAG_TXUR_Msk & ((value) << I2S_INTFLAG_TXUR_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_INTFLAG_MASK _U(0x3333) /**< \brief (I2S_INTFLAG) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_SYNCBUSY : (I2S Offset: 0x18) (R/ 16) Synchronization Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t SWRST:1; /*!< bit: 0 Software Reset Synchronization Status */
uint16_t ENABLE:1; /*!< bit: 1 Enable Synchronization Status */
uint16_t CKEN0:1; /*!< bit: 2 Clock Unit 0 Enable Synchronization Status */
uint16_t CKEN1:1; /*!< bit: 3 Clock Unit 1 Enable Synchronization Status */
uint16_t SEREN0:1; /*!< bit: 4 Serializer 0 Enable Synchronization Status */
uint16_t SEREN1:1; /*!< bit: 5 Serializer 1 Enable Synchronization Status */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t DATA0:1; /*!< bit: 8 Data 0 Synchronization Status */
uint16_t DATA1:1; /*!< bit: 9 Data 1 Synchronization Status */
uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint16_t :2; /*!< bit: 0.. 1 Reserved */
uint16_t CKEN:2; /*!< bit: 2.. 3 Clock Unit x Enable Synchronization Status */
uint16_t SEREN:2; /*!< bit: 4.. 5 Serializer x Enable Synchronization Status */
uint16_t :2; /*!< bit: 6.. 7 Reserved */
uint16_t DATA:2; /*!< bit: 8.. 9 Data x Synchronization Status */
uint16_t :6; /*!< bit: 10..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} I2S_SYNCBUSY_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_SYNCBUSY_OFFSET 0x18 /**< \brief (I2S_SYNCBUSY offset) Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_RESETVALUE _U(0x0000) /**< \brief (I2S_SYNCBUSY reset_value) Synchronization Status */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_SWRST_Pos 0 /**< \brief (I2S_SYNCBUSY) Software Reset Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_SWRST (_U(0x1) << I2S_SYNCBUSY_SWRST_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_ENABLE_Pos 1 /**< \brief (I2S_SYNCBUSY) Enable Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_ENABLE (_U(0x1) << I2S_SYNCBUSY_ENABLE_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_CKEN0_Pos 2 /**< \brief (I2S_SYNCBUSY) Clock Unit 0 Enable Synchronization Status */
#define I2S_SYNCBUSY_CKEN0 (1 << I2S_SYNCBUSY_CKEN0_Pos)
#define I2S_SYNCBUSY_CKEN1_Pos 3 /**< \brief (I2S_SYNCBUSY) Clock Unit 1 Enable Synchronization Status */
#define I2S_SYNCBUSY_CKEN1 (1 << I2S_SYNCBUSY_CKEN1_Pos)
#define I2S_SYNCBUSY_CKEN_Pos 2 /**< \brief (I2S_SYNCBUSY) Clock Unit x Enable Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_CKEN_Msk (_U(0x3) << I2S_SYNCBUSY_CKEN_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_CKEN(value) (I2S_SYNCBUSY_CKEN_Msk & ((value) << I2S_SYNCBUSY_CKEN_Pos))
#define I2S_SYNCBUSY_SEREN0_Pos 4 /**< \brief (I2S_SYNCBUSY) Serializer 0 Enable Synchronization Status */
#define I2S_SYNCBUSY_SEREN0 (1 << I2S_SYNCBUSY_SEREN0_Pos)
#define I2S_SYNCBUSY_SEREN1_Pos 5 /**< \brief (I2S_SYNCBUSY) Serializer 1 Enable Synchronization Status */
#define I2S_SYNCBUSY_SEREN1 (1 << I2S_SYNCBUSY_SEREN1_Pos)
#define I2S_SYNCBUSY_SEREN_Pos 4 /**< \brief (I2S_SYNCBUSY) Serializer x Enable Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_SEREN_Msk (_U(0x3) << I2S_SYNCBUSY_SEREN_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_SEREN(value) (I2S_SYNCBUSY_SEREN_Msk & ((value) << I2S_SYNCBUSY_SEREN_Pos))
#define I2S_SYNCBUSY_DATA0_Pos 8 /**< \brief (I2S_SYNCBUSY) Data 0 Synchronization Status */
#define I2S_SYNCBUSY_DATA0 (1 << I2S_SYNCBUSY_DATA0_Pos)
#define I2S_SYNCBUSY_DATA1_Pos 9 /**< \brief (I2S_SYNCBUSY) Data 1 Synchronization Status */
#define I2S_SYNCBUSY_DATA1 (1 << I2S_SYNCBUSY_DATA1_Pos)
#define I2S_SYNCBUSY_DATA_Pos 8 /**< \brief (I2S_SYNCBUSY) Data x Synchronization Status */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_DATA_Msk (_U(0x3) << I2S_SYNCBUSY_DATA_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SYNCBUSY_DATA(value) (I2S_SYNCBUSY_DATA_Msk & ((value) << I2S_SYNCBUSY_DATA_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SYNCBUSY_MASK _U(0x033F) /**< \brief (I2S_SYNCBUSY) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_SERCTRL : (I2S Offset: 0x20) (R/W 32) Serializer n Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t SERMODE:2; /*!< bit: 0.. 1 Serializer Mode */
uint32_t TXDEFAULT:2; /*!< bit: 2.. 3 Line Default Line when Slot Disabled */
uint32_t TXSAME:1; /*!< bit: 4 Transmit Data when Underrun */
uint32_t CLKSEL:1; /*!< bit: 5 Clock Unit Selection */
uint32_t :1; /*!< bit: 6 Reserved */
uint32_t SLOTADJ:1; /*!< bit: 7 Data Slot Formatting Adjust */
uint32_t DATASIZE:3; /*!< bit: 8..10 Data Word Size */
uint32_t :1; /*!< bit: 11 Reserved */
uint32_t WORDADJ:1; /*!< bit: 12 Data Word Formatting Adjust */
uint32_t EXTEND:2; /*!< bit: 13..14 Data Formatting Bit Extension */
uint32_t BITREV:1; /*!< bit: 15 Data Formatting Bit Reverse */
uint32_t SLOTDIS0:1; /*!< bit: 16 Slot 0 Disabled for this Serializer */
uint32_t SLOTDIS1:1; /*!< bit: 17 Slot 1 Disabled for this Serializer */
uint32_t SLOTDIS2:1; /*!< bit: 18 Slot 2 Disabled for this Serializer */
uint32_t SLOTDIS3:1; /*!< bit: 19 Slot 3 Disabled for this Serializer */
uint32_t SLOTDIS4:1; /*!< bit: 20 Slot 4 Disabled for this Serializer */
uint32_t SLOTDIS5:1; /*!< bit: 21 Slot 5 Disabled for this Serializer */
uint32_t SLOTDIS6:1; /*!< bit: 22 Slot 6 Disabled for this Serializer */
uint32_t SLOTDIS7:1; /*!< bit: 23 Slot 7 Disabled for this Serializer */
uint32_t MONO:1; /*!< bit: 24 Mono Mode */
uint32_t DMA:1; /*!< bit: 25 Single or Multiple DMA Channels */
uint32_t RXLOOP:1; /*!< bit: 26 Loop-back Test Mode */
uint32_t :5; /*!< bit: 27..31 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint32_t :16; /*!< bit: 0..15 Reserved */
uint32_t SLOTDIS:8; /*!< bit: 16..23 Slot x Disabled for this Serializer */
uint32_t :8; /*!< bit: 24..31 Reserved */
} vec; /*!< Structure used for vec access */
uint32_t reg; /*!< Type used for register access */
} I2S_SERCTRL_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_SERCTRL_OFFSET 0x20 /**< \brief (I2S_SERCTRL offset) Serializer n Control */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_RESETVALUE _U(0x00000000) /**< \brief (I2S_SERCTRL reset_value) Serializer n Control */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_SERMODE_Pos 0 /**< \brief (I2S_SERCTRL) Serializer Mode */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_SERMODE_Msk (_U(0x3) << I2S_SERCTRL_SERMODE_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_SERMODE(value) (I2S_SERCTRL_SERMODE_Msk & ((value) << I2S_SERCTRL_SERMODE_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_SERMODE_RX_Val _U(0x0) /**< \brief (I2S_SERCTRL) Receive */
#define I2S_SERCTRL_SERMODE_TX_Val _U(0x1) /**< \brief (I2S_SERCTRL) Transmit */
#define I2S_SERCTRL_SERMODE_PDM2_Val _U(0x2) /**< \brief (I2S_SERCTRL) Receive one PDM data on each serial clock edge */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_SERMODE_RX (I2S_SERCTRL_SERMODE_RX_Val << I2S_SERCTRL_SERMODE_Pos)
#define I2S_SERCTRL_SERMODE_TX (I2S_SERCTRL_SERMODE_TX_Val << I2S_SERCTRL_SERMODE_Pos)
#define I2S_SERCTRL_SERMODE_PDM2 (I2S_SERCTRL_SERMODE_PDM2_Val << I2S_SERCTRL_SERMODE_Pos)
#define I2S_SERCTRL_TXDEFAULT_Pos 2 /**< \brief (I2S_SERCTRL) Line Default Line when Slot Disabled */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_TXDEFAULT_Msk (_U(0x3) << I2S_SERCTRL_TXDEFAULT_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_TXDEFAULT(value) (I2S_SERCTRL_TXDEFAULT_Msk & ((value) << I2S_SERCTRL_TXDEFAULT_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_TXDEFAULT_ZERO_Val _U(0x0) /**< \brief (I2S_SERCTRL) Output Default Value is 0 */
#define I2S_SERCTRL_TXDEFAULT_ONE_Val _U(0x1) /**< \brief (I2S_SERCTRL) Output Default Value is 1 */
#define I2S_SERCTRL_TXDEFAULT_HIZ_Val _U(0x3) /**< \brief (I2S_SERCTRL) Output Default Value is high impedance */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_TXDEFAULT_ZERO (I2S_SERCTRL_TXDEFAULT_ZERO_Val << I2S_SERCTRL_TXDEFAULT_Pos)
#define I2S_SERCTRL_TXDEFAULT_ONE (I2S_SERCTRL_TXDEFAULT_ONE_Val << I2S_SERCTRL_TXDEFAULT_Pos)
#define I2S_SERCTRL_TXDEFAULT_HIZ (I2S_SERCTRL_TXDEFAULT_HIZ_Val << I2S_SERCTRL_TXDEFAULT_Pos)
#define I2S_SERCTRL_TXSAME_Pos 4 /**< \brief (I2S_SERCTRL) Transmit Data when Underrun */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_TXSAME (_U(0x1) << I2S_SERCTRL_TXSAME_Pos)
#define I2S_SERCTRL_TXSAME_ZERO_Val _U(0x0) /**< \brief (I2S_SERCTRL) Zero data transmitted in case of underrun */
#define I2S_SERCTRL_TXSAME_SAME_Val _U(0x1) /**< \brief (I2S_SERCTRL) Last data transmitted in case of underrun */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_TXSAME_ZERO (I2S_SERCTRL_TXSAME_ZERO_Val << I2S_SERCTRL_TXSAME_Pos)
#define I2S_SERCTRL_TXSAME_SAME (I2S_SERCTRL_TXSAME_SAME_Val << I2S_SERCTRL_TXSAME_Pos)
#define I2S_SERCTRL_CLKSEL_Pos 5 /**< \brief (I2S_SERCTRL) Clock Unit Selection */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_CLKSEL (_U(0x1) << I2S_SERCTRL_CLKSEL_Pos)
#define I2S_SERCTRL_CLKSEL_CLK0_Val _U(0x0) /**< \brief (I2S_SERCTRL) Use Clock Unit 0 */
#define I2S_SERCTRL_CLKSEL_CLK1_Val _U(0x1) /**< \brief (I2S_SERCTRL) Use Clock Unit 1 */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_CLKSEL_CLK0 (I2S_SERCTRL_CLKSEL_CLK0_Val << I2S_SERCTRL_CLKSEL_Pos)
#define I2S_SERCTRL_CLKSEL_CLK1 (I2S_SERCTRL_CLKSEL_CLK1_Val << I2S_SERCTRL_CLKSEL_Pos)
#define I2S_SERCTRL_SLOTADJ_Pos 7 /**< \brief (I2S_SERCTRL) Data Slot Formatting Adjust */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_SLOTADJ (_U(0x1) << I2S_SERCTRL_SLOTADJ_Pos)
#define I2S_SERCTRL_SLOTADJ_RIGHT_Val _U(0x0) /**< \brief (I2S_SERCTRL) Data is right adjusted in slot */
#define I2S_SERCTRL_SLOTADJ_LEFT_Val _U(0x1) /**< \brief (I2S_SERCTRL) Data is left adjusted in slot */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_SLOTADJ_RIGHT (I2S_SERCTRL_SLOTADJ_RIGHT_Val << I2S_SERCTRL_SLOTADJ_Pos)
#define I2S_SERCTRL_SLOTADJ_LEFT (I2S_SERCTRL_SLOTADJ_LEFT_Val << I2S_SERCTRL_SLOTADJ_Pos)
#define I2S_SERCTRL_DATASIZE_Pos 8 /**< \brief (I2S_SERCTRL) Data Word Size */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_DATASIZE_Msk (_U(0x7) << I2S_SERCTRL_DATASIZE_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_DATASIZE(value) (I2S_SERCTRL_DATASIZE_Msk & ((value) << I2S_SERCTRL_DATASIZE_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_DATASIZE_32_Val _U(0x0) /**< \brief (I2S_SERCTRL) 32 bits */
#define I2S_SERCTRL_DATASIZE_24_Val _U(0x1) /**< \brief (I2S_SERCTRL) 24 bits */
#define I2S_SERCTRL_DATASIZE_20_Val _U(0x2) /**< \brief (I2S_SERCTRL) 20 bits */
#define I2S_SERCTRL_DATASIZE_18_Val _U(0x3) /**< \brief (I2S_SERCTRL) 18 bits */
#define I2S_SERCTRL_DATASIZE_16_Val _U(0x4) /**< \brief (I2S_SERCTRL) 16 bits */
#define I2S_SERCTRL_DATASIZE_16C_Val _U(0x5) /**< \brief (I2S_SERCTRL) 16 bits compact stereo */
#define I2S_SERCTRL_DATASIZE_8_Val _U(0x6) /**< \brief (I2S_SERCTRL) 8 bits */
#define I2S_SERCTRL_DATASIZE_8C_Val _U(0x7) /**< \brief (I2S_SERCTRL) 8 bits compact stereo */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_DATASIZE_32 (I2S_SERCTRL_DATASIZE_32_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_24 (I2S_SERCTRL_DATASIZE_24_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_20 (I2S_SERCTRL_DATASIZE_20_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_18 (I2S_SERCTRL_DATASIZE_18_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_16 (I2S_SERCTRL_DATASIZE_16_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_16C (I2S_SERCTRL_DATASIZE_16C_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_8 (I2S_SERCTRL_DATASIZE_8_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_DATASIZE_8C (I2S_SERCTRL_DATASIZE_8C_Val << I2S_SERCTRL_DATASIZE_Pos)
#define I2S_SERCTRL_WORDADJ_Pos 12 /**< \brief (I2S_SERCTRL) Data Word Formatting Adjust */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_WORDADJ (_U(0x1) << I2S_SERCTRL_WORDADJ_Pos)
#define I2S_SERCTRL_WORDADJ_RIGHT_Val _U(0x0) /**< \brief (I2S_SERCTRL) Data is right adjusted in word */
#define I2S_SERCTRL_WORDADJ_LEFT_Val _U(0x1) /**< \brief (I2S_SERCTRL) Data is left adjusted in word */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_WORDADJ_RIGHT (I2S_SERCTRL_WORDADJ_RIGHT_Val << I2S_SERCTRL_WORDADJ_Pos)
#define I2S_SERCTRL_WORDADJ_LEFT (I2S_SERCTRL_WORDADJ_LEFT_Val << I2S_SERCTRL_WORDADJ_Pos)
#define I2S_SERCTRL_EXTEND_Pos 13 /**< \brief (I2S_SERCTRL) Data Formatting Bit Extension */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_EXTEND_Msk (_U(0x3) << I2S_SERCTRL_EXTEND_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_EXTEND(value) (I2S_SERCTRL_EXTEND_Msk & ((value) << I2S_SERCTRL_EXTEND_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_EXTEND_ZERO_Val _U(0x0) /**< \brief (I2S_SERCTRL) Extend with zeroes */
#define I2S_SERCTRL_EXTEND_ONE_Val _U(0x1) /**< \brief (I2S_SERCTRL) Extend with ones */
#define I2S_SERCTRL_EXTEND_MSBIT_Val _U(0x2) /**< \brief (I2S_SERCTRL) Extend with Most Significant Bit */
#define I2S_SERCTRL_EXTEND_LSBIT_Val _U(0x3) /**< \brief (I2S_SERCTRL) Extend with Least Significant Bit */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_EXTEND_ZERO (I2S_SERCTRL_EXTEND_ZERO_Val << I2S_SERCTRL_EXTEND_Pos)
#define I2S_SERCTRL_EXTEND_ONE (I2S_SERCTRL_EXTEND_ONE_Val << I2S_SERCTRL_EXTEND_Pos)
#define I2S_SERCTRL_EXTEND_MSBIT (I2S_SERCTRL_EXTEND_MSBIT_Val << I2S_SERCTRL_EXTEND_Pos)
#define I2S_SERCTRL_EXTEND_LSBIT (I2S_SERCTRL_EXTEND_LSBIT_Val << I2S_SERCTRL_EXTEND_Pos)
#define I2S_SERCTRL_BITREV_Pos 15 /**< \brief (I2S_SERCTRL) Data Formatting Bit Reverse */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_BITREV (_U(0x1) << I2S_SERCTRL_BITREV_Pos)
#define I2S_SERCTRL_BITREV_MSBIT_Val _U(0x0) /**< \brief (I2S_SERCTRL) Transfer Data Most Significant Bit (MSB) first (default for I2S protocol) */
#define I2S_SERCTRL_BITREV_LSBIT_Val _U(0x1) /**< \brief (I2S_SERCTRL) Transfer Data Least Significant Bit (LSB) first */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_BITREV_MSBIT (I2S_SERCTRL_BITREV_MSBIT_Val << I2S_SERCTRL_BITREV_Pos)
#define I2S_SERCTRL_BITREV_LSBIT (I2S_SERCTRL_BITREV_LSBIT_Val << I2S_SERCTRL_BITREV_Pos)
#define I2S_SERCTRL_SLOTDIS0_Pos 16 /**< \brief (I2S_SERCTRL) Slot 0 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS0 (1 << I2S_SERCTRL_SLOTDIS0_Pos)
#define I2S_SERCTRL_SLOTDIS1_Pos 17 /**< \brief (I2S_SERCTRL) Slot 1 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS1 (1 << I2S_SERCTRL_SLOTDIS1_Pos)
#define I2S_SERCTRL_SLOTDIS2_Pos 18 /**< \brief (I2S_SERCTRL) Slot 2 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS2 (1 << I2S_SERCTRL_SLOTDIS2_Pos)
#define I2S_SERCTRL_SLOTDIS3_Pos 19 /**< \brief (I2S_SERCTRL) Slot 3 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS3 (1 << I2S_SERCTRL_SLOTDIS3_Pos)
#define I2S_SERCTRL_SLOTDIS4_Pos 20 /**< \brief (I2S_SERCTRL) Slot 4 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS4 (1 << I2S_SERCTRL_SLOTDIS4_Pos)
#define I2S_SERCTRL_SLOTDIS5_Pos 21 /**< \brief (I2S_SERCTRL) Slot 5 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS5 (1 << I2S_SERCTRL_SLOTDIS5_Pos)
#define I2S_SERCTRL_SLOTDIS6_Pos 22 /**< \brief (I2S_SERCTRL) Slot 6 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS6 (1 << I2S_SERCTRL_SLOTDIS6_Pos)
#define I2S_SERCTRL_SLOTDIS7_Pos 23 /**< \brief (I2S_SERCTRL) Slot 7 Disabled for this Serializer */
#define I2S_SERCTRL_SLOTDIS7 (1 << I2S_SERCTRL_SLOTDIS7_Pos)
#define I2S_SERCTRL_SLOTDIS_Pos 16 /**< \brief (I2S_SERCTRL) Slot x Disabled for this Serializer */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_SLOTDIS_Msk (_U(0xFF) << I2S_SERCTRL_SLOTDIS_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_SLOTDIS(value) (I2S_SERCTRL_SLOTDIS_Msk & ((value) << I2S_SERCTRL_SLOTDIS_Pos))
#define I2S_SERCTRL_MONO_Pos 24 /**< \brief (I2S_SERCTRL) Mono Mode */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_MONO (_U(0x1) << I2S_SERCTRL_MONO_Pos)
#define I2S_SERCTRL_MONO_STEREO_Val _U(0x0) /**< \brief (I2S_SERCTRL) Normal mode */
#define I2S_SERCTRL_MONO_MONO_Val _U(0x1) /**< \brief (I2S_SERCTRL) Left channel data is duplicated to right channel */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_MONO_STEREO (I2S_SERCTRL_MONO_STEREO_Val << I2S_SERCTRL_MONO_Pos)
#define I2S_SERCTRL_MONO_MONO (I2S_SERCTRL_MONO_MONO_Val << I2S_SERCTRL_MONO_Pos)
#define I2S_SERCTRL_DMA_Pos 25 /**< \brief (I2S_SERCTRL) Single or Multiple DMA Channels */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_DMA (_U(0x1) << I2S_SERCTRL_DMA_Pos)
#define I2S_SERCTRL_DMA_SINGLE_Val _U(0x0) /**< \brief (I2S_SERCTRL) Single DMA channel */
#define I2S_SERCTRL_DMA_MULTIPLE_Val _U(0x1) /**< \brief (I2S_SERCTRL) One DMA channel per data channel */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_SERCTRL_DMA_SINGLE (I2S_SERCTRL_DMA_SINGLE_Val << I2S_SERCTRL_DMA_Pos)
#define I2S_SERCTRL_DMA_MULTIPLE (I2S_SERCTRL_DMA_MULTIPLE_Val << I2S_SERCTRL_DMA_Pos)
#define I2S_SERCTRL_RXLOOP_Pos 26 /**< \brief (I2S_SERCTRL) Loop-back Test Mode */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_SERCTRL_RXLOOP (_U(0x1) << I2S_SERCTRL_RXLOOP_Pos)
#define I2S_SERCTRL_MASK _U(0x07FFF7BF) /**< \brief (I2S_SERCTRL) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/* -------- I2S_DATA : (I2S Offset: 0x30) (R/W 32) Data n -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t DATA:32; /*!< bit: 0..31 Sample Data */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} I2S_DATA_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define I2S_DATA_OFFSET 0x30 /**< \brief (I2S_DATA offset) Data n */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_DATA_RESETVALUE _U(0x00000000) /**< \brief (I2S_DATA reset_value) Data n */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_DATA_DATA_Pos 0 /**< \brief (I2S_DATA) Sample Data */
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_DATA_DATA_Msk (_U(0xFFFFFFFF) << I2S_DATA_DATA_Pos)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
#define I2S_DATA_DATA(value) (I2S_DATA_DATA_Msk & ((value) << I2S_DATA_DATA_Pos))
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178.
2017-09-22 21:05:51 -04:00
#define I2S_DATA_MASK _U(0xFFFFFFFF) /**< \brief (I2S_DATA) MASK Register */
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
/** \brief I2S hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO I2S_CTRLA_Type CTRLA; /**< \brief Offset: 0x00 (R/W 8) Control A */
RoReg8 Reserved1[0x3];
__IO I2S_CLKCTRL_Type CLKCTRL[2]; /**< \brief Offset: 0x04 (R/W 32) Clock Unit n Control */
__IO I2S_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x0C (R/W 16) Interrupt Enable Clear */
RoReg8 Reserved2[0x2];
__IO I2S_INTENSET_Type INTENSET; /**< \brief Offset: 0x10 (R/W 16) Interrupt Enable Set */
RoReg8 Reserved3[0x2];
__IO I2S_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x14 (R/W 16) Interrupt Flag Status and Clear */
RoReg8 Reserved4[0x2];
__I I2S_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x18 (R/ 16) Synchronization Status */
RoReg8 Reserved5[0x6];
__IO I2S_SERCTRL_Type SERCTRL[2]; /**< \brief Offset: 0x20 (R/W 32) Serializer n Control */
RoReg8 Reserved6[0x8];
__IO I2S_DATA_Type DATA[2]; /**< \brief Offset: 0x30 (R/W 32) Data n */
} I2s;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
#endif /* _SAMD21_I2S_COMPONENT_ */
Reference in New Issue Copy Permalink