circuitpython/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.h

// LEDs
#define MICROPY_HW_LED_STATUS   (&pin_PA17)

#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 RFM9x"
#define MICROPY_HW_MCU_NAME "samd21g18"

#define MICROPY_PORT_A        (0)
#define MICROPY_PORT_B        (0)
#define MICROPY_PORT_C        (0)

#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)

#define DEFAULT_SPI_BUS_SCK (&pin_PB11)
#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)
#define DEFAULT_SPI_BUS_MISO (&pin_PA12)

#define DEFAULT_UART_BUS_RX (&pin_PA11)
#define DEFAULT_UART_BUS_TX (&pin_PA10)

// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24     1
#define IGNORE_PIN_PA25     1
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 14:53:47 -05:00			`// LEDs`
Rework safe mode and have heap overwrite trigger it. This creates a common safe mode mechanic that ports can share. As a result, the nRF52 now has safe mode support as well. The common safe mode adds a 700ms delay at startup where a reset during that window will cause a reset into safe mode. This window is designated by a yellow status pixel and flashing the single led three times. A couple NeoPixel fixes are included for the nRF52 as well. Fixes #1034. Fixes #990. Fixes #615. 2018-12-06 17:24:20 -05:00			`#define MICROPY_HW_LED_STATUS (&pin_PA17)`
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 14:53:47 -05:00
			`#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 RFM9x"`
			`#define MICROPY_HW_MCU_NAME "samd21g18"`

Move atmel-samd to tinyusb and support nRF flash. This started while adding USB MIDI support (and descriptor support is in this change.) When seeing that I'd have to implement the MIDI class logic twice, once for atmel-samd and once for nrf, I decided to refactor the USB stack so its shared across ports. This has led to a number of changes that remove items from the ports folder and move them into supervisor. Furthermore, we had external SPI flash support for nrf pending so I factored out the connection between the usb stack and the flash API as well. This PR also includes the QSPI support for nRF. 2018-10-19 21:46:22 -04:00			`#define MICROPY_PORT_A (0)`
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 14:53:47 -05:00			`#define MICROPY_PORT_B (0)`
			`#define MICROPY_PORT_C (0)`

feather m0 boards 2018-05-15 15:28:23 -04:00			`#define DEFAULT_I2C_BUS_SCL (&pin_PA23)`
			`#define DEFAULT_I2C_BUS_SDA (&pin_PA22)`

SPI for all boards 2018-05-16 15:36:36 -04:00			`#define DEFAULT_SPI_BUS_SCK (&pin_PB11)`
spi on much 2018-05-16 15:25:24 -04:00			`#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)`
fix formatting 2018-05-16 17:38:44 -04:00			`#define DEFAULT_SPI_BUS_MISO (&pin_PA12)`
arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
			`#define DEFAULT_UART_BUS_RX (&pin_PA11)`
			`#define DEFAULT_UART_BUS_TX (&pin_PA10)`
Turn off USB pin objects since they are always used for USB. 2018-06-06 15:07:28 -04:00
			`// USB is always used internally so skip the pin objects for it.`
			`#define IGNORE_PIN_PA24 1`
			`#define IGNORE_PIN_PA25 1`