circuitpython/ports/renesas-ra/boards/EK_RA6M2/mpconfigboard.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

89 lines
4.1 KiB
C
Raw Normal View History

// MCU config
#define MICROPY_HW_BOARD_NAME "EK-RA6M2"
#define MICROPY_HW_MCU_NAME "RA6M2"
#define MICROPY_HW_MCU_SYSCLK 120000000
#define MICROPY_HW_MCU_PCLK 60000000
// module config
#define MICROPY_EMIT_THUMB (1)
#define MICROPY_EMIT_INLINE_THUMB (1)
#define MICROPY_PY_BUILTINS_COMPLEX (1)
#define MICROPY_PY_GENERATOR_PEND_THROW (1)
#define MICROPY_PY_MATH (1)
#define MICROPY_PY_UHEAPQ (1)
#define MICROPY_PY_UTIMEQ (1)
#define MICROPY_PY_THREAD (0) // disable ARM_THUMB_FP using vldr due to RA has single float only
// peripheral config
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_RTC_SOURCE (0) // 0: subclock
#define MICROPY_HW_ENABLE_ADC (1)
#define MICROPY_HW_HAS_FLASH (1)
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
// board config
// UART
#define MICROPY_HW_UART0_TX (pin_P411) // REPL
#define MICROPY_HW_UART0_RX (pin_P410) // REPL
// #define MICROPY_HW_UART0_CTS (pin_P413) // NC
// #define MICROPY_HW_UART1_TX (pin_P709) // Disable (read not work properly)
// #define MICROPY_HW_UART1_RX (pin_P708) // Disable (read not work properly)
// #define MICROPY_HW_UART1_CTS (pin_P711) // Disable (read not work properly)
// #define MICROPY_HW_UART2_TX (pin_P302) // Disable
// #define MICROPY_HW_UART2_RX (pin_P301) // Disable
// #define MICROPY_HW_UART2_CTS (pin_P203) // NC
// #define MICROPY_HW_UART3_TX (pin_P310) // Disable
// #define MICROPY_HW_UART3_RX (pin_P309) // Disable
// #define MICROPY_HW_UART3_CTS (pin_P312) // Disable
// #define MICROPY_HW_UART4_TX (pin_P512) // Disable (Conflict with I2C2)
// #define MICROPY_HW_UART4_RX (pin_P511) // Disable (Conflict with I2C2)
// #define MICROPY_HW_UART4_CTS (pin_P401) // Disable (Conflict with PMOD B)
// #define MICROPY_HW_UART5_TX (pin_P501) // Disable
// #define MICROPY_HW_UART5_RX (pin_P502) // Disable
// #define MICROPY_HW_UART5_CTS (pin_P504) // Disable
// #define MICROPY_HW_UART6_TX (pin_P506) // Disable (read not work properly)
// #define MICROPY_HW_UART6_RX (pin_P505) // Disable (read not work properly)
// #define MICROPY_HW_UART6_CTS (pin_P503) // Disable (read not work properly)
#define MICROPY_HW_UART7_TX (pin_P401) // PMOD B
#define MICROPY_HW_UART7_RX (pin_P402) // PMOD B
#define MICROPY_HW_UART7_CTS (pin_P403) // PMOD B
// #define MICROPY_HW_UART8_TX (pin_P105) // Disable (conflict with USER SW1)
// #define MICROPY_HW_UART8_RX (pin_P104)
#define MICROPY_HW_UART9_TX (pin_P602)
#define MICROPY_HW_UART9_RX (pin_P601)
#define MICROPY_HW_UART9_CTS (pin_P603)
#define MICROPY_HW_UART_REPL HW_UART_0
#define MICROPY_HW_UART_REPL_BAUD 115200
// I2C
// #define MICROPY_HW_I2C0_SCL (pin_P400) // Disable (Conflict with PMOD B)
// #define MICROPY_HW_I2C0_SDA (pin_P401) // Disable (Conflict with PMOD B)
// #define MICROPY_HW_I2C1_SCL (pin_P100) // Disable (Conflict with SPI & SDcard)
// #define MICROPY_HW_I2C1_SDA (pin_P101) // Disable (Conflict with SPI & SDcard)
#define MICROPY_HW_I2C2_SCL (pin_P512)
#define MICROPY_HW_I2C2_SDA (pin_P511)
// SPI
#define MICROPY_HW_SPI0_SSL (pin_P103) // PMOD A
#define MICROPY_HW_SPI0_RSPCK (pin_P102)
#define MICROPY_HW_SPI0_MISO (pin_P100)
#define MICROPY_HW_SPI0_MOSI (pin_P101)
#define MICROPY_HW_SPI1_SSL (pin_P703) // Pin Header
#define MICROPY_HW_SPI1_RSPCK (pin_P702)
#define MICROPY_HW_SPI1_MISO (pin_P700)
#define MICROPY_HW_SPI1_MOSI (pin_P701)
// Switch
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_USRSW_PIN (pin_P105)
#define MICROPY_HW_USRSW_PULL (MP_HAL_PIN_PULL_NONE)
#define MICROPY_HW_USRSW_EXTI_MODE (MP_HAL_PIN_TRIGGER_FALLING)
#define MICROPY_HW_USRSW_PRESSED (0)
// LEDs
#define MICROPY_HW_LED1 (pin_P106)
#define MICROPY_HW_LED_ON(pin) mp_hal_pin_high(pin)
#define MICROPY_HW_LED_OFF(pin) mp_hal_pin_low(pin)
#define MICROPY_HW_LED_TOGGLE(pin) mp_hal_pin_toggle(pin)