circuitpython/ports/mimxrt/boards/OLIMEX_RT1010/pins.csv

D0,GPIO_00
D1,GPIO_01
D2,GPIO_02
D3,GPIO_03
D4,GPIO_04
D5,GPIO_05
D6,GPIO_06
D7,GPIO_07
D8,GPIO_08
D9,GPIO_SD_00
D10,GPIO_SD_01
D11,GPIO_SD_02
D12,GPIO_SD_05
D13,GPIO_SD_12
D14,GPIO_SD_13
A0,GPIO_AD_02
A1,GPIO_AD_03
A2,GPIO_AD_04
A3,GPIO_AD_05
A4,GPIO_AD_06
LED,GPIO_11
SDA1, GPIO_AD_13
SCL1, GPIO_AD_14
SDA2, GPIO_AD_07
SCL2, GPIO_AD_08
SDI, GPIO_AD_09
SDO, GPIO_AD_10
CS0, GPIO_AD_11
SCK, GPIO_AD_12
USB_OTG1_PWR, GPIO_AD_00
BT0, GPIO_SD_04
BT1, GPIO_SD_03
RX, GPIO_09
TX, GPIO_10
RELAY1,GPIO_SD_12
RELAY2,GPIO_SD_13
MCK,GPIO_08
SCK_RX,GPIO_01
WS_RX,GPIO_02
SD_RX,GPIO_03
SCK_TX,GPIO_06
WS_TX,GPIO_07
SD_TX,GPIO_04
mimxrt: Add support for the Olimex RT1010 board. The board.json file is intentionally excluded, until the board will be sold. But including it into the mimxrt series make it easier to keep the build up-to-date. 2022-01-14 04:24:30 -05:00			`D0,GPIO_00`
			`D1,GPIO_01`
			`D2,GPIO_02`
			`D3,GPIO_03`
			`D4,GPIO_04`
			`D5,GPIO_05`
			`D6,GPIO_06`
			`D7,GPIO_07`
			`D8,GPIO_08`
			`D9,GPIO_SD_00`
			`D10,GPIO_SD_01`
			`D11,GPIO_SD_02`
			`D12,GPIO_SD_05`
			`D13,GPIO_SD_12`
			`D14,GPIO_SD_13`
			`A0,GPIO_AD_02`
			`A1,GPIO_AD_03`
			`A2,GPIO_AD_04`
			`A3,GPIO_AD_05`
			`A4,GPIO_AD_06`
			`LED,GPIO_11`
			`SDA1, GPIO_AD_13`
			`SCL1, GPIO_AD_14`
			`SDA2, GPIO_AD_07`
			`SCL2, GPIO_AD_08`
			`SDI, GPIO_AD_09`
			`SDO, GPIO_AD_10`
			`CS0, GPIO_AD_11`
			`SCK, GPIO_AD_12`
			`USB_OTG1_PWR, GPIO_AD_00`
			`BT0, GPIO_SD_04`
			`BT1, GPIO_SD_03`
			`RX, GPIO_09`
			`TX, GPIO_10`
			`RELAY1,GPIO_SD_12`
			`RELAY2,GPIO_SD_13`
mixmrt/machine_i2s: Add I2S protocol support. This commit adds support for machine.I2S on the mimxrt port. The I2S API is consistent with the existing stm32, esp32, and rp2 implementations. I2S features: - controller transmit and controller receive - 16-bit and 32-bit sample sizes - mono and stereo formats - sampling frequencies from 8kHz to 48kHz - 3 modes of operation: - blocking - non-blocking with callback - uasyncio - configurable internal buffer - optional MCK Tested with the following development boards: - MIMXRT1010_EVK, MIMXRT1015_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK - Teensy 4.0, Teensy 4.1 - Olimex RT1010 - Seeed ARCH MIX Tested with the following I2S hardware peripherals: - UDA1334 - GY-SPH0645LM4H - WM8960 codec on board the MIMXRT boards and separate breakout board - INMP441 - PCM5102 - SGTL5000 on the Teensy audio shield Signed-off-by: Mike Teachman <mike.teachman@gmail.com> 2021-11-29 12:50:34 -05:00			`MCK,GPIO_08`
			`SCK_RX,GPIO_01`
			`WS_RX,GPIO_02`
			`SD_RX,GPIO_03`
			`SCK_TX,GPIO_06`
			`WS_TX,GPIO_07`
			`SD_TX,GPIO_04`