circuitpython/ports/nrf/common-hal/microcontroller/Processor.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "py/runtime.h"

#include "common-hal/microcontroller/Processor.h"
#include "shared-bindings/microcontroller/ResetReason.h"
#include "supervisor/shared/translate.h"

#include "nrfx_saadc.h"
#ifdef BLUETOOTH_SD
#include "nrf_sdm.h"
#endif

#include "nrf.h"

float common_hal_mcu_processor_get_temperature(void) {
    int32_t temp = 0;

    #ifdef BLUETOOTH_SD
    uint8_t sd_en = 0;

    (void)sd_softdevice_is_enabled(&sd_en);

    if (sd_en) {
        uint32_t err_code = sd_temp_get(&temp);
        if (err_code != NRF_SUCCESS) {
            mp_raise_OSError_msg(translate("Cannot get temperature"));
        }
        return temp / 4.0f;
    } // Fall through if SD not enabled.
    #endif
    NRF_TEMP->TASKS_START = 1;
    while (NRF_TEMP->EVENTS_DATARDY == 0) {
    }
    NRF_TEMP->EVENTS_DATARDY = 0;
    temp = NRF_TEMP->TEMP;
    NRF_TEMP->TASKS_STOP = 1;
    return temp / 4.0f;
}



uint32_t common_hal_mcu_processor_get_frequency(void) {
    return 64000000ul;
}

float common_hal_mcu_processor_get_voltage(void) {
    nrf_saadc_value_t value;

    const nrf_saadc_channel_config_t config = {
        .resistor_p = NRF_SAADC_RESISTOR_DISABLED,
        .resistor_n = NRF_SAADC_RESISTOR_DISABLED,
        .gain = NRF_SAADC_GAIN1_6,
        .reference = NRF_SAADC_REFERENCE_INTERNAL,
        .acq_time = NRF_SAADC_ACQTIME_10US,
        .mode = NRF_SAADC_MODE_SINGLE_ENDED,
        .burst = NRF_SAADC_BURST_DISABLED
    };

    nrf_saadc_resolution_set(NRF_SAADC, NRF_SAADC_RESOLUTION_14BIT);
    nrf_saadc_oversample_set(NRF_SAADC, NRF_SAADC_OVERSAMPLE_DISABLED);
    nrf_saadc_enable(NRF_SAADC);

    for (uint32_t i = 0; i < SAADC_CH_NUM; i++) {
        nrf_saadc_channel_input_set(NRF_SAADC, i, NRF_SAADC_INPUT_DISABLED, NRF_SAADC_INPUT_DISABLED);
    }

    nrf_saadc_channel_init(NRF_SAADC, 0, &config);
    nrf_saadc_channel_input_set(NRF_SAADC, 0, NRF_SAADC_INPUT_VDD, NRF_SAADC_INPUT_VDD);
    nrf_saadc_buffer_init(NRF_SAADC, &value, 1);

    nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_START);
    while (nrf_saadc_event_check(NRF_SAADC, NRF_SAADC_EVENT_STARTED) == 0) {
    }
    nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_STARTED);

    nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_SAMPLE);
    while (nrf_saadc_event_check(NRF_SAADC, NRF_SAADC_EVENT_END) == 0) {
    }
    nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_END);

    nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_STOP);
    while (nrf_saadc_event_check(NRF_SAADC, NRF_SAADC_EVENT_STOPPED) == 0) {
    }
    nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_STOPPED);

    nrf_saadc_disable(NRF_SAADC);

    if (value < 0) {
        value = 0;
    }

// The ADC reading we expect if VDD is 3.3V.
#define NOMINAL_VALUE_3_3 (((3.3f / 6) / 0.6f) * 16383)
    return (value / NOMINAL_VALUE_3_3) * 3.3f;
}


void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) {
    for (int i = 0; i < 2; i++) {
        ((uint32_t *)raw_id)[i] = NRF_FICR->DEVICEID[i];
    }
}

mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) {
    mcu_reset_reason_t r = RESET_REASON_UNKNOWN;
    if (reset_reason_saved == 0) {
      r = RESET_REASON_POWER_ON;
    }
    else if (reset_reason_saved & POWER_RESETREAS_RESETPIN_Msk) {
      r = RESET_REASON_RESET_PIN;
    }
    else if (reset_reason_saved & POWER_RESETREAS_DOG_Msk) {
      r = RESET_REASON_WATCHDOG;
    }
    else if (reset_reason_saved & POWER_RESETREAS_SREQ_Msk) {
      r = RESET_REASON_SOFTWARE;
    }
    else if ((reset_reason_saved & POWER_RESETREAS_OFF_Msk) ||
	     (reset_reason_saved & POWER_RESETREAS_LPCOMP_Msk) ||
	     (reset_reason_saved & POWER_RESETREAS_NFC_Msk) ||
	     (reset_reason_saved & POWER_RESETREAS_VBUS_Msk))  {
      r = RESET_REASON_DEEP_SLEEP_ALARM;
    }
    return r;
}