djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6e9429d779
circuitpython/ports/atmel-samd/boards/pybadge_airlift/pins.c

74 lines
3.4 KiB
C
Raw Normal View History

Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
#include "shared-bindings/board/__init__.h"
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
#include "supervisor/board.h"
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
#include "shared-module/displayio/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA05)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB08)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB09)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA06)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PB01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB17)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB16)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA16)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA18)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA15)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA20)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA21)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA22)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA23)},
// I2C
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA13)},
// SPI
{MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17)},
{MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB22)},
{MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB23)},
// Special named pins
{MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15)},
{MP_OBJ_NEW_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_PB04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ACCELEROMETER_INTERRUPT), MP_ROM_PTR(&pin_PB14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_PA02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_PA27)},
{MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_LATCH), MP_ROM_PTR(&pin_PB00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_OUT), MP_ROM_PTR(&pin_PB30)},
{MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_CLOCK), MP_ROM_PTR(&pin_PB31)},
// ESP control
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_PA14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_PA31)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PA00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB12)},
rename ESP TX and RX pins; remove support
2020-11-30 11:11:04 -05:00
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PB16)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PB17)},
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
// TFT control pins
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PA01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_PB15)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_PB13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_PB07)},
{MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB06)},
{MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB05)},
{MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj)},
{MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj)},
run code formatting script
2021-03-15 09:57:36 -04:00
{MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
};
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
Reference in New Issue Copy Permalink