circuitpython/ports/mimxrt/boards/MIMXRT1060_EVK/flash_config.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

123 lines
5.8 KiB
C
Raw Normal View History

/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1060_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 8u * 1024u * 1024u,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 64u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */