djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
68219a295c
circuitpython/ports/mimxrt/boards/TEENSY41/mpconfigboard.mk

12 lines
291 B
Makefile
Raw Normal View History

mimxrt/boards: Add board configuration files for Teensy 4.1. These are at the moment more or less identical to the Teensy 4.0 files, except for the pins.csv file and the flash size.
2021-06-01 14:15:55 -04:00
MCU_SERIES = MIMXRT1062
MCU_VARIANT = MIMXRT1062DVJ6A
MICROPY_FLOAT_IMPL = double
mimxrt/sdcard: Implement SDCard driver. - Configures `PLL2->PFD0` with **198MHz** as base clock of `USDHCx` peripheral. - Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD` - Adds creation of pin defines for SDCard to make-pins.py - Adds new configuration option for SDCard peripheral pinout to mpconfigport.h - Adds interrupt handling support instead of polling - Adds support for `ADMA2` powered data transfer - Configures SDCard to run in HS (high-speed mode) with **50MHz** only! SDCard support is optional and requires `USDHC` peripheral. Thus this driver is not available on `MIMXRT1010_EVK`. SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1` in mpconfigboard.mk. Signed-off-by: Philipp Ebensberger
2021-08-01 05:20:39 -04:00
MICROPY_PY_MACHINE_SDCARD = 1
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x800000 # 8MB
BOARD_FLASH_RESERVED ?= 0x1000 # 4KB
mimxrt: Add support for Hyperflash chips. Hyperflash is used by the MIMXRT1050_EVKB, MIMXRT1060_EVK and MIMXRT1064_EVK boards. This commit includes: - add support for Hyperflash - modify MIMXRT1060_EVK and MIMXRT1064_EVK to change from QSPI to hyperflash. - minor incidental changes to other boards so they still build Note: Erasing a sector on the hyperflash is slow. It takes about a second, which seems too long, but matches the data sheet.
2021-07-20 02:18:18 -04:00
mimxrt/boards: Add board configuration files for Teensy 4.1. These are at the moment more or less identical to the Teensy 4.0 files, except for the pins.csv file and the flash size.
2021-06-01 14:15:55 -04:00
deploy: $(BUILD)/firmware.hex
teensy_loader_cli --mcu=imxrt1062 -v -w $<
Reference in New Issue Copy Permalink