circuitpython/ports/stm32/boards/NUCLEO_H743ZI/board_init.c

#include "py/mphal.h"

void NUCLEO_H743ZI_board_early_init(void) {
    // Turn off the USB switch
    mp_hal_pin_output(pyb_pin_OTG_FS_POWER);
    mp_hal_pin_low(pyb_pin_OTG_FS_POWER);
}
stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI. And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal functions. 2018-05-29 08:28:09 -04:00			`#include "py/mphal.h"`
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK. 2018-02-20 17:35:05 -05:00
			`void NUCLEO_H743ZI_board_early_init(void) {`
			`// Turn off the USB switch`
stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI. This commit creates a new stm32 board for the NUCLEO_H743ZI2, which is the current version of this from ST. This is a modified copy of the NUCLEO_H743ZI board, and the ZI2 board differs in a few minor ways: - LED2 has moved from PB7 to PE1 and is now yellow rather than blue - the USB power enable has moved from PG6 to PG10 - the USER button is now pulled down 2021-08-06 16:13:20 -04:00			`mp_hal_pin_output(pyb_pin_OTG_FS_POWER);`
			`mp_hal_pin_low(pyb_pin_OTG_FS_POWER);`
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK. 2018-02-20 17:35:05 -05:00			`}`