djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
56845b6aff
circuitpython/stmhal/hal/f7/inc/stm32f7xx_hal_adc.h

766 lines
35 KiB
C
Raw Normal View History

stmhal: Add hal and cmsis files from STM32Cube_FW_F7_V1.1.0. All files were converted to linux line endings. All trailing whitespace was removed using: for f in f7/inc/* f7/src/*; do sed --in-place 's/[[:space:]]\+$//' $f; done All non-ascii chars in comments were replaced with ascii equivalents or removed.
2015-07-27 20:20:56 -04:00
/**
******************************************************************************
* @file stm32f7xx_hal_adc.h
* @author MCD Application Team
* @version V1.0.1
* @date 25-June-2015
* @brief Header file of ADC HAL extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_ADC_H
#define __STM32F7xx_ADC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
/** @addtogroup ADC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup ADC_Exported_Types ADC Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */
}HAL_ADC_StateTypeDef;
/**
* @brief ADC Init structure definition
*/
typedef struct
{
uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for
all the ADCs.
This parameter can be a value of @ref ADC_ClockPrescaler */
uint32_t Resolution; /*!< Configures the ADC resolution dual mode.
This parameter can be a value of @ref ADC_Resolution */
uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
This parameter can be a value of @ref ADC_data_align */
uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or
Single (one channel) mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set
at the end of single channel conversion or at the end of all conversions.
This parameter can be a value of @ref ADC_EOCSelection */
uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
This parameter can be set to ENABLE or DISABLE. */
uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
This parameter can be set to ENABLE or DISABLE. */
uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
regular channel group.
This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
for regular channels.
This parameter can be set to ENABLE or DISABLE. */
uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done
using the sequencer for regular channel group.
This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
If set to ADC_SOFTWARE_START, external triggers are disabled.
This parameter can be a value of @ref ADC_External_trigger_Source_Regular
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
This parameter can be a value of @ref ADC_External_trigger_edge_Regular
Note: This parameter can be modified only if there is no conversion is ongoing. */
}ADC_InitTypeDef;
/**
* @brief ADC handle Structure definition
*/
typedef struct
{
ADC_TypeDef *Instance; /*!< Register base address */
ADC_InitTypeDef Init; /*!< ADC required parameters */
__IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
HAL_LockTypeDef Lock; /*!< ADC locking object */
__IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
__IO uint32_t ErrorCode; /*!< ADC Error code */
}ADC_HandleTypeDef;
/**
* @brief ADC Configuration regular Channel structure definition
*/
typedef struct
{
uint32_t Channel; /*!< The ADC channel to configure.
This parameter can be a value of @ref ADC_channels */
uint32_t Rank; /*!< The rank in the regular group sequencer.
This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel.
This parameter can be a value of @ref ADC_sampling_times */
uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
}ADC_ChannelConfTypeDef;
/**
* @brief ADC Configuration multi-mode structure definition
*/
typedef struct
{
uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
This parameter can be a value of @ref ADC_analog_watchdog_selection */
uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
This parameter must be a 12-bit value. */
uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
This parameter must be a 12-bit value. */
uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
This parameter has an effect only if watchdog mode is configured on single channel
This parameter can be a value of @ref ADC_channels */
uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
is interrupt mode or in polling mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
}ADC_AnalogWDGConfTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup ADC_Exported_Constants ADC Exported Constants
* @{
*/
/** @defgroup ADC_Error_Code ADC Error Code
* @{
*/
#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */
#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */
/**
* @}
*/
/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
* @{
*/
#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)0x00000000)
#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
#define ADC_CLOCK_SYNC_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
#define ADC_CLOCK_SYNC_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
/**
* @}
*/
/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
* @{
*/
#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000)
#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
/**
* @}
*/
/** @defgroup ADC_Resolution ADC Resolution
* @{
*/
#define ADC_RESOLUTION_12B ((uint32_t)0x00000000)
#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0)
#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1)
#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES)
/**
* @}
*/
/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
* @{
*/
#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
/**
* @}
*/
/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
* @{
*/
/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
/* compatibility with other STM32 devices. */
#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000)
#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T5_TRGO ((uint32_t)ADC_CR2_EXTSEL_2)
#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T3_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T8_TRGO2 ((uint32_t)ADC_CR2_EXTSEL_3)
#define ADC_EXTERNALTRIGCONV_T1_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T4_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
#define ADC_EXTERNALTRIGCONV_T6_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_EXT_IT11 ((uint32_t)ADC_CR2_EXTSEL)
#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1)
/**
* @}
*/
/** @defgroup ADC_data_align ADC Data Align
* @{
*/
#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
/**
* @}
*/
/** @defgroup ADC_channels ADC Common Channels
* @{
*/
#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
/**
* @}
*/
/** @defgroup ADC_sampling_times ADC Sampling Times
* @{
*/
#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000)
#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
/**
* @}
*/
/** @defgroup ADC_EOCSelection ADC EOC Selection
* @{
*/
#define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000)
#define ADC_EOC_SINGLE_CONV ((uint32_t)0x00000001)
#define ADC_EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */
/**
* @}
*/
/** @defgroup ADC_Event_type ADC Event Type
* @{
*/
#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
/**
* @}
*/
/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
* @{
*/
#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
/**
* @}
*/
/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
* @{
*/
#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
/**
* @}
*/
/** @defgroup ADC_flags_definition ADC Flags Definition
* @{
*/
#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
/**
* @}
*/
/** @defgroup ADC_channels_type ADC Channels Type
* @{
*/
#define ADC_ALL_CHANNELS ((uint32_t)0x00000001)
#define ADC_REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */
#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup ADC_Exported_Macros ADC Exported Macros
* @{
*/
/** @brief Reset ADC handle state
* @param __HANDLE__: ADC handle
* @retval None
*/
#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
/**
* @brief Enable the ADC peripheral.
* @param __HANDLE__: ADC handle
* @retval None
*/
#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
/**
* @brief Disable the ADC peripheral.
* @param __HANDLE__: ADC handle
* @retval None
*/
#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
/**
* @brief Enable the ADC end of conversion interrupt.
* @param __HANDLE__: specifies the ADC Handle.
* @param __INTERRUPT__: ADC Interrupt.
* @retval None
*/
#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
/**
* @brief Disable the ADC end of conversion interrupt.
* @param __HANDLE__: specifies the ADC Handle.
* @param __INTERRUPT__: ADC interrupt.
* @retval None
*/
#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
/** @brief Check if the specified ADC interrupt source is enabled or disabled.
* @param __HANDLE__: specifies the ADC Handle.
* @param __INTERRUPT__: specifies the ADC interrupt source to check.
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @brief Clear the ADC's pending flags.
* @param __HANDLE__: specifies the ADC Handle.
* @param __FLAG__: ADC flag.
* @retval None
*/
#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
/**
* @brief Get the selected ADC's flag status.
* @param __HANDLE__: specifies the ADC Handle.
* @param __FLAG__: ADC flag.
* @retval None
*/
#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/**
* @}
*/
/* Include ADC HAL Extension module */
#include "stm32f7xx_hal_adc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup ADC_Exported_Functions
* @{
*/
/** @addtogroup ADC_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions ***********************************/
HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group2
* @{
*/
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions *************************************************/
HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions ***************************************************/
HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup ADC_Private_Constants ADC Private Constants
* @{
*/
/* Delay for ADC stabilization time. */
/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
/* Unit: us */
#define ADC_STAB_DELAY_US ((uint32_t) 3)
/* Delay for temperature sensor stabilization time. */
/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
/* Unit: us */
#define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup ADC_Private_Macros ADC Private Macros
* @{
*/
#define IS_ADC_CLOCKPRESCALER(__ADC_CLOCK__) (((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV6) || \
((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV8))
#define IS_ADC_SAMPLING_DELAY(__DELAY__) (((__DELAY__) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
((__DELAY__) == ADC_TWOSAMPLINGDELAY_20CYCLES))
#define IS_ADC_RESOLUTION(__RESOLUTION__) (((__RESOLUTION__) == ADC_RESOLUTION_12B) || \
((__RESOLUTION__) == ADC_RESOLUTION_10B) || \
((__RESOLUTION__) == ADC_RESOLUTION_8B) || \
((__RESOLUTION__) == ADC_RESOLUTION_6B))
#define IS_ADC_EXT_TRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
#define IS_ADC_EXT_TRIG(__REGTRIG__) (((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T5_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
((__REGTRIG__) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
((__REGTRIG__) == ADC_SOFTWARE_START))
#define IS_ADC_DATA_ALIGN(__ALIGN__) (((__ALIGN__) == ADC_DATAALIGN_RIGHT) || \
((__ALIGN__) == ADC_DATAALIGN_LEFT))
#define IS_ADC_SAMPLE_TIME(__TIME__) (((__TIME__) == ADC_SAMPLETIME_3CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_15CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_28CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_56CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_84CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_112CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_144CYCLES) || \
((__TIME__) == ADC_SAMPLETIME_480CYCLES))
#define IS_ADC_EOCSelection(__EOCSelection__) (((__EOCSelection__) == ADC_EOC_SINGLE_CONV) || \
((__EOCSelection__) == ADC_EOC_SEQ_CONV) || \
((__EOCSelection__) == ADC_EOC_SINGLE_SEQ_CONV))
#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_AWD_EVENT) || \
((__EVENT__) == ADC_OVR_EVENT))
#define IS_ADC_ANALOG_WATCHDOG(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_REG) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
((__WATCHDOG__) == ADC_ANALOGWATCHDOG_NONE))
#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
#define IS_ADC_THRESHOLD(__THRESHOLD__) ((__THRESHOLD__) <= ((uint32_t)0xFFF))
#define IS_ADC_REGULAR_LENGTH(__LENGTH__) (((__LENGTH__) >= ((uint32_t)1)) && ((__LENGTH__) <= ((uint32_t)16)))
#define IS_ADC_REGULAR_RANK(__RANK__) (((__RANK__) >= ((uint32_t)1)) && ((__RANK__) <= ((uint32_t)16)))
#define IS_ADC_REGULAR_DISC_NUMBER(__NUMBER__) (((__NUMBER__) >= ((uint32_t)1)) && ((__NUMBER__) <= ((uint32_t)8)))
#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \
((((__RESOLUTION__) == ADC_RESOLUTION_12B) && ((__ADC_VALUE__) <= ((uint32_t)0x0FFF))) || \
(((__RESOLUTION__) == ADC_RESOLUTION_10B) && ((__ADC_VALUE__) <= ((uint32_t)0x03FF))) || \
(((__RESOLUTION__) == ADC_RESOLUTION_8B) && ((__ADC_VALUE__) <= ((uint32_t)0x00FF))) || \
(((__RESOLUTION__) == ADC_RESOLUTION_6B) && ((__ADC_VALUE__) <= ((uint32_t)0x003F))))
/**
* @brief Set ADC Regular channel sequence length.
* @param _NbrOfConversion_: Regular channel sequence length.
* @retval None
*/
#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
/**
* @brief Set the ADC's sample time for channel numbers between 10 and 18.
* @param _SAMPLETIME_: Sample time parameter.
* @param _CHANNELNB_: Channel number.
* @retval None
*/
#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10)))
/**
* @brief Set the ADC's sample time for channel numbers between 0 and 9.
* @param _SAMPLETIME_: Sample time parameter.
* @param _CHANNELNB_: Channel number.
* @retval None
*/
#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
/**
* @brief Set the selected regular channel rank for rank between 1 and 6.
* @param _CHANNELNB_: Channel number.
* @param _RANKNB_: Rank number.
* @retval None
*/
#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1)))
/**
* @brief Set the selected regular channel rank for rank between 7 and 12.
* @param _CHANNELNB_: Channel number.
* @param _RANKNB_: Rank number.
* @retval None
*/
#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7)))
/**
* @brief Set the selected regular channel rank for rank between 13 and 16.
* @param _CHANNELNB_: Channel number.
* @param _RANKNB_: Rank number.
* @retval None
*/
#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13)))
/**
* @brief Enable ADC continuous conversion mode.
* @param _CONTINUOUS_MODE_: Continuous mode.
* @retval None
*/
#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
/**
* @brief Configures the number of discontinuous conversions for the regular group channels.
* @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
* @retval None
*/
#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM))
/**
* @brief Enable ADC scan mode.
* @param _SCANCONV_MODE_: Scan conversion mode.
* @retval None
*/
#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
/**
* @brief Enable the ADC end of conversion selection.
* @param _EOCSelection_MODE_: End of conversion selection mode.
* @retval None
*/
#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
/**
* @brief Enable the ADC DMA continuous request.
* @param _DMAContReq_MODE_: DMA continuous request mode.
* @retval None
*/
#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
/**
* @brief Return resolution bits in CR1 register.
* @param __HANDLE__: ADC handle
* @retval None
*/
#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup ADC_Private_Functions ADC Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F7xx_ADC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue Copy Permalink