djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/ports/stm32/boards/STM32F7DISC/pins.csv

56 lines
572 B
Plaintext
Raw Normal View History

stmhal: Add STM32F7DISC and associated changes.
2015-07-28 14:13:33 -04:00
A0,PA0
A1,PF10
A2,PF9
A3,PF8
A4,PF7
A5,PF6
D0,PC7
D1,PC6
D2,PG6
D3,PB4
D4,PG7
D5,PA8
D6,PH6
D7,PI3
D8,PI2
D9,PA15
D10,PI0
D11,PB15
D12,PB14
D13,PI1
D14,PB9
D15,PB8
LED,PI1
SW,PI11
TP1,PH2
TP2,PI8
TP3,PH15
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
AUDIO_INT,PD6
stmhal: Enable I2C support for F7 MCUs.
2015-08-04 02:04:57 -04:00
AUDIO_SDA,PH8
AUDIO_SCL,PH7
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
EXT_SDA,PB9
EXT_SCL,PB8
EXT_RST,PG3
stmhal/sdcard: Use mp_hal_pin_config function instead of HAL_GPIO_Init. There is a minor functional change with this patch, that the GPIO are now configured in fast mode, whereas they were in high speed mode before. But the SDIO should still work because SD CK frequency is at most 25MHz.
2016-12-21 22:53:03 -05:00
SD_D0,PC8
SD_D1,PC9
SD_D2,PC10
SD_D3,PC11
SD_CK,PC12
SD_CMD,PD2
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
SD_SW,PC13
stmhal: Add STM32F7DISC and associated changes.
2015-07-28 14:13:33 -04:00
LCD_BL_CTRL,PK3
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
LCD_INT,PI13
stmhal: Enable I2C support for F7 MCUs.
2015-08-04 02:04:57 -04:00
LCD_SDA,PH8
LCD_SCL,PH7
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
OTG_FS_POWER,PD5
OTG_FS_OVER_CURRENT,PD4
OTG_HS_OVER_CURRENT,PE3
USB_VBUS,PJ12
stmhal: Add STM32F7DISC and associated changes.
2015-07-28 14:13:33 -04:00
USB_ID,PA10
USB_DM,PA11
USB_DP,PA12
stmhal: Add STM32F7 support for USB serial and storage. USB serial is now working for F7. Internal file storage is now working for F7. The flash is laid out a bit differently to the F4 - 4 x 32K, 1 x 128K with the rest 256K, so the internal storage is 96K. Added more pind definitions for STM32F7DISC board. Made USART1 be the default HWUART repl. The STLINK usb connector also looks like a USB serial port which is attached to USART1 on the STM32F7DISC.
2015-07-30 12:50:58 -04:00
VCP_TX,PA9
VCP_RX,PB7
stm32/can: Allow CAN pins to be configured per board. This patch allows a given board to configure which pins are used for the CAN peripherals, in a similar way to all the other bus peripherals (I2C, UART, SPI). To enable CAN on a board the mpconfigboard.h file should define (for example): #define MICROPY_HW_CAN1_TX (pin_B9) #define MICROPY_HW_CAN1_RX (pin_B8) #define MICROPY_HW_CAN2_TX (pin_B13) #define MICROPY_HW_CAN2_RX (pin_B12) And the board config file should no longer define MICROPY_HW_ENABLE_CAN.
2018-04-11 02:27:48 -04:00
CAN_TX,PB13
CAN_RX,PB12