circuitpython/ports/esp32/boards/sdkconfig.base

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

66 lines
1.7 KiB
Plaintext
Raw Normal View History

# MicroPython on ESP32, ESP IDF configuration
# The following options override the defaults
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
esp32: Enable optimisations and move code to iRAM to boost performance. This commit enables some significant optimisations for esp32: - move the VM to iRAM - move hot parts of the runtime to iRAM (map lookup, load global/name, mp_obj_get_type) - enable MICROPY_OPT_LOAD_ATTR_FAST_PATH - enable MICROPY_OPT_MAP_LOOKUP_CACHE - disable assertions - change from -Os to -O2 for compilation It's hard to measure performance on esp32 due to external flash and hardware caching. But this set of changes improves performance compared to master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running at 160MHz): diff of scores (higher is better) N=100 M=100 esp32-master -> esp32-perf diff diff% (error%) bm_chaos.py 71.28 -> 268.08 : +196.80 = +276.094% (+/-0.04%) bm_fannkuch.py 44.10 -> 69.31 : +25.21 = +57.166% (+/-0.01%) bm_fft.py 1385.27 -> 2538.23 : +1152.96 = +83.230% (+/-0.01%) bm_float.py 1060.94 -> 3900.62 : +2839.68 = +267.657% (+/-0.03%) bm_hexiom.py 10.90 -> 32.79 : +21.89 = +200.826% (+/-0.02%) bm_nqueens.py 1000.83 -> 2372.87 : +1372.04 = +137.090% (+/-0.01%) bm_pidigits.py 288.13 -> 664.40 : +376.27 = +130.590% (+/-0.46%) misc_aes.py 102.45 -> 345.69 : +243.24 = +237.423% (+/-0.01%) misc_mandel.py 1016.58 -> 2121.92 : +1105.34 = +108.731% (+/-0.01%) misc_pystone.py 632.91 -> 1801.87 : +1168.96 = +184.696% (+/-0.08%) misc_raytrace.py 76.66 -> 281.78 : +205.12 = +267.571% (+/-0.05%) viper_call0.py 210.63 -> 273.17 : +62.54 = +29.692% (+/-0.01%) viper_call1a.py 208.45 -> 269.51 : +61.06 = +29.292% (+/-0.00%) viper_call1b.py 185.44 -> 228.25 : +42.81 = +23.086% (+/-0.01%) viper_call1c.py 185.86 -> 228.90 : +43.04 = +23.157% (+/-0.01%) viper_call2a.py 207.10 -> 267.25 : +60.15 = +29.044% (+/-0.00%) viper_call2b.py 173.76 -> 209.42 : +35.66 = +20.523% (+/-0.00%) Five tests have more than 3x speed up (200%+). The performance of the tests bm_fft, bm_pidigits and misc_aes now scale with CPU frequency (eg changing frequency to 240MHz boosts the performance of these by 50%), which means they are no longer influenced by timing of external flash access. (The viper_call* tests did previously scale with CPU frequency, and they still do.) Turning off assertions reduces code size by about 80k, and going from -Os to -O2 costs about 100k, so the net change in code size (for the GENERIC board) is about +20k. If a board wants to enable assertions, or use -Os instead of -O2, that's still possible by overriding the sdkconfig parameters. Signed-off-by: Damien George <damien@micropython.org>
2021-09-23 22:50:59 -04:00
# Compiler options: use -O2 and disable assertions to improve performance
# (CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is for IDF 4.0.2)
CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE=y
esp32: Enable optimisations and move code to iRAM to boost performance. This commit enables some significant optimisations for esp32: - move the VM to iRAM - move hot parts of the runtime to iRAM (map lookup, load global/name, mp_obj_get_type) - enable MICROPY_OPT_LOAD_ATTR_FAST_PATH - enable MICROPY_OPT_MAP_LOOKUP_CACHE - disable assertions - change from -Os to -O2 for compilation It's hard to measure performance on esp32 due to external flash and hardware caching. But this set of changes improves performance compared to master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running at 160MHz): diff of scores (higher is better) N=100 M=100 esp32-master -> esp32-perf diff diff% (error%) bm_chaos.py 71.28 -> 268.08 : +196.80 = +276.094% (+/-0.04%) bm_fannkuch.py 44.10 -> 69.31 : +25.21 = +57.166% (+/-0.01%) bm_fft.py 1385.27 -> 2538.23 : +1152.96 = +83.230% (+/-0.01%) bm_float.py 1060.94 -> 3900.62 : +2839.68 = +267.657% (+/-0.03%) bm_hexiom.py 10.90 -> 32.79 : +21.89 = +200.826% (+/-0.02%) bm_nqueens.py 1000.83 -> 2372.87 : +1372.04 = +137.090% (+/-0.01%) bm_pidigits.py 288.13 -> 664.40 : +376.27 = +130.590% (+/-0.46%) misc_aes.py 102.45 -> 345.69 : +243.24 = +237.423% (+/-0.01%) misc_mandel.py 1016.58 -> 2121.92 : +1105.34 = +108.731% (+/-0.01%) misc_pystone.py 632.91 -> 1801.87 : +1168.96 = +184.696% (+/-0.08%) misc_raytrace.py 76.66 -> 281.78 : +205.12 = +267.571% (+/-0.05%) viper_call0.py 210.63 -> 273.17 : +62.54 = +29.692% (+/-0.01%) viper_call1a.py 208.45 -> 269.51 : +61.06 = +29.292% (+/-0.00%) viper_call1b.py 185.44 -> 228.25 : +42.81 = +23.086% (+/-0.01%) viper_call1c.py 185.86 -> 228.90 : +43.04 = +23.157% (+/-0.01%) viper_call2a.py 207.10 -> 267.25 : +60.15 = +29.044% (+/-0.00%) viper_call2b.py 173.76 -> 209.42 : +35.66 = +20.523% (+/-0.00%) Five tests have more than 3x speed up (200%+). The performance of the tests bm_fft, bm_pidigits and misc_aes now scale with CPU frequency (eg changing frequency to 240MHz boosts the performance of these by 50%), which means they are no longer influenced by timing of external flash access. (The viper_call* tests did previously scale with CPU frequency, and they still do.) Turning off assertions reduces code size by about 80k, and going from -Os to -O2 costs about 100k, so the net change in code size (for the GENERIC board) is about +20k. If a board wants to enable assertions, or use -Os instead of -O2, that's still possible by overriding the sdkconfig parameters. Signed-off-by: Damien George <damien@micropython.org>
2021-09-23 22:50:59 -04:00
CONFIG_COMPILER_OPTIMIZATION_PERF=y
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
# Application manager
CONFIG_APP_EXCLUDE_PROJECT_VER_VAR=y
CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR=y
# Bootloader config
CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
# Change default log level to "ERROR" (instead of "INFO")
CONFIG_LOG_DEFAULT_LEVEL_INFO=n
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
CONFIG_LOG_DEFAULT_LEVEL=1
# ESP32-specific
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
CONFIG_ESP32_XTAL_FREQ_AUTO=y
# Power Management
CONFIG_PM_ENABLE=y
# Memory protection
# This is required to allow allocating IRAM
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=n
# FreeRTOS
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=2
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP=y
# UDP
CONFIG_LWIP_PPP_SUPPORT=y
CONFIG_LWIP_PPP_PAP_SUPPORT=y
CONFIG_LWIP_PPP_CHAP_SUPPORT=y
# SSL
# Use 4kiB output buffer instead of default 16kiB (because IDF heap is fragmented in 4.0)
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
# ULP coprocessor support
CONFIG_ESP32_ULP_COPROC_ENABLED=y
# For cmake build
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
# To reduce iRAM usage
CONFIG_ESP32_WIFI_IRAM_OPT=n
CONFIG_ESP32_WIFI_RX_IRAM_OPT=n
# ADC calibration
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y