circuitpython/ports/espressif/boards/espressif_esp32s3_eye/sdkconfig

CONFIG_ESP32S3_SPIRAM_SUPPORT=y
#
# SPI RAM config
#
# CONFIG_SPIRAM_MODE_QUAD is not set
CONFIG_SPIRAM_MODE_OCT=y
# CONFIG_SPIRAM_TYPE_AUTO is not set
CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
CONFIG_SPIRAM_SIZE=8388608
# end of SPI RAM config

CONFIG_DEFAULT_PSRAM_CLK_IO=30
#
# PSRAM Clock and CS IO for ESP32S3
#
CONFIG_DEFAULT_PSRAM_CS_IO=26
# end of PSRAM Clock and CS IO for ESP32S3

# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
# CONFIG_SPIRAM_RODATA is not set
CONFIG_SPIRAM_SPEED_80M=y
# CONFIG_SPIRAM_SPEED_40M is not set
CONFIG_SPIRAM=y
CONFIG_SPIRAM_BOOT_INIT=y
# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
CONFIG_SPIRAM_USE_MEMMAP=y
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
# CONFIG_SPIRAM_USE_MALLOC is not set
CONFIG_SPIRAM_MEMTEST=y
#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3-eye"
# end of LWIP
add esp32-camera This uses the esp32-camera code instead of our own homebrewed camera code. In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have PSRAM. This is very basic and doesn't support changing any camera parameters, including switching resolution or pixelformat. This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards. First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`: ``` CIRCUITPY_RESERVED_PSRAM=524288 ``` and hard-reset the board for it to take effect. Now, the following script will take a very low-resolution jpeg file and print it in the REPL in escape coded form: ```python import board import esp32_camera c = esp32_camera.Camera( data_pins=board.CAMERA_DATA, external_clock_pin=board.CAMERA_XCLK, pixel_clock_pin=board.CAMERA_PCLK, vsync_pin=board.CAMERA_VSYNC, href_pin=board.CAMERA_HREF, pixel_format=esp32_camera.PixelFormat.JPEG, i2c=board.I2C(), external_clock_frequency=20_000_000) m = c.take() if m is not None: print(bytes(m)) ``` Then on desktop open a python repl and run something like ```python >>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>) ``` and open my.jpg in a viewer. 2022-08-04 16:11:50 -04:00			`CONFIG_ESP32S3_SPIRAM_SUPPORT=y`
			`#`
			`# SPI RAM config`
			`#`
			`# CONFIG_SPIRAM_MODE_QUAD is not set`
			`CONFIG_SPIRAM_MODE_OCT=y`
			`# CONFIG_SPIRAM_TYPE_AUTO is not set`
			`CONFIG_SPIRAM_TYPE_ESPPSRAM64=y`
			`CONFIG_SPIRAM_SIZE=8388608`
			`# end of SPI RAM config`

			`CONFIG_DEFAULT_PSRAM_CLK_IO=30`
			`#`
			`# PSRAM Clock and CS IO for ESP32S3`
			`#`
			`CONFIG_DEFAULT_PSRAM_CS_IO=26`
			`# end of PSRAM Clock and CS IO for ESP32S3`

			`# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set`
			`# CONFIG_SPIRAM_RODATA is not set`
			`CONFIG_SPIRAM_SPEED_80M=y`
			`# CONFIG_SPIRAM_SPEED_40M is not set`
			`CONFIG_SPIRAM=y`
			`CONFIG_SPIRAM_BOOT_INIT=y`
			`# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set`
			`CONFIG_SPIRAM_USE_MEMMAP=y`
			`# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set`
			`# CONFIG_SPIRAM_USE_MALLOC is not set`
			`CONFIG_SPIRAM_MEMTEST=y`
			`#`
			`# LWIP`
			`#`
			`CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3-eye"`
			`# end of LWIP`