circuitpython/shared-bindings/microcontroller/__init__.c

196 lines
7.4 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Scott Shawcroft
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Microcontroller contains pin references and microcontroller specific control
// functions.
#include <stdint.h>
#include "py/obj.h"
#include "py/runtime.h"
#include "common-hal/microcontroller/Pin.h"
#include "common-hal/microcontroller/Processor.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/microcontroller/Processor.h"
2018-07-31 19:53:54 -04:00
#include "supervisor/shared/translate.h"
//| """Pin references and cpu functionality
//|
//| The `microcontroller` module defines the pins from the perspective of the
//| microcontroller. See `board` for board-specific pin mappings."""
//|
2020-08-03 00:35:43 -04:00
//| from nvm import ByteArray
//| from watchdog import WatchDogTimer
//|
2020-07-25 04:58:37 -04:00
//| cpu: Processor
//| """CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency``
//| (clock frequency).
2021-01-28 17:06:30 -05:00
//| This object is an instance of `microcontroller.Processor`."""
//|
//| cpus: Processor
//| """CPU information and control, such as ``cpus[0].temperature`` and ``cpus[1].frequency``
2021-01-29 12:57:36 -05:00
//| (clock frequency) on chips with more than 1 cpu. The index selects which cpu.
2021-01-28 17:06:30 -05:00
//| This object is an instance of `microcontroller.Processor`."""
//|
2020-07-03 16:03:19 -04:00
//| def delay_us(delay: int) -> None:
//| """Dedicated delay method used for very short delays. **Do not** do long delays
//| because this stops all other functions from completing. Think of this as an empty
//| ``while`` loop that runs for the specified ``(delay)`` time. If you have other
//| code or peripherals (e.g audio recording) that require specific timing or
//| processing while you are waiting, explore a different avenue such as using
//| `time.sleep()`."""
//| ...
//|
STATIC mp_obj_t mcu_delay_us(mp_obj_t delay_obj) {
uint32_t delay = mp_obj_get_int(delay_obj);
common_hal_mcu_delay_us(delay);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_delay_us_obj, mcu_delay_us);
2020-07-03 16:03:19 -04:00
//| def disable_interrupts() -> None:
//| """Disable all interrupts. Be very careful, this can stall everything."""
//| ...
//|
STATIC mp_obj_t mcu_disable_interrupts(void) {
common_hal_mcu_disable_interrupts();
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_disable_interrupts_obj, mcu_disable_interrupts);
2020-07-03 16:03:19 -04:00
//| def enable_interrupts() -> None:
//| """Enable the interrupts that were enabled at the last disable."""
//| ...
//|
STATIC mp_obj_t mcu_enable_interrupts(void) {
common_hal_mcu_enable_interrupts();
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_enable_interrupts_obj, mcu_enable_interrupts);
2020-07-03 16:03:19 -04:00
//| def on_next_reset(run_mode: microcontroller.RunMode) -> None:
//| """Configure the run mode used the next time the microcontroller is reset but
//| not powered down.
2018-01-02 21:25:41 -05:00
//|
//| :param ~microcontroller.RunMode run_mode: The next run mode"""
//| ...
2018-01-02 21:25:41 -05:00
//|
STATIC mp_obj_t mcu_on_next_reset(mp_obj_t run_mode_obj) {
mcu_runmode_t run_mode;
if (run_mode_obj == &mcu_runmode_normal_obj) {
run_mode = RUNMODE_NORMAL;
} else if (run_mode_obj == &mcu_runmode_safe_mode_obj) {
run_mode = RUNMODE_SAFE_MODE;
} else if (run_mode_obj == &mcu_runmode_bootloader_obj) {
run_mode = RUNMODE_BOOTLOADER;
} else {
2018-07-31 19:53:54 -04:00
mp_raise_ValueError(translate("Invalid run mode."));
2018-01-02 21:25:41 -05:00
}
common_hal_mcu_on_next_reset(run_mode);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_on_next_reset_obj, mcu_on_next_reset);
2020-07-03 16:03:19 -04:00
//| def reset() -> None:
//| """Reset the microcontroller. After reset, the microcontroller will enter the
//| run mode last set by `on_next_reset`.
2018-01-02 21:25:41 -05:00
//|
//| .. warning:: This may result in file system corruption when connected to a
//| host computer. Be very careful when calling this! Make sure the device
//| "Safely removed" on Windows or "ejected" on Mac OSX and Linux."""
//| ...
2018-01-02 21:25:41 -05:00
//|
STATIC mp_obj_t mcu_reset(void) {
common_hal_mcu_reset();
// We won't actually get here because we're resetting.
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_reset_obj, mcu_reset);
2020-08-03 00:35:43 -04:00
//| nvm: Optional[ByteArray]
//| """Available non-volatile memory.
//| This object is the sole instance of `nvm.ByteArray` when available or ``None`` otherwise.
//|
//| :type: nvm.ByteArray or None"""
//|
2020-08-03 00:35:43 -04:00
//| watchdog: Optional[WatchDogTimer]
2020-07-25 04:58:37 -04:00
//| """Available watchdog timer.
//| This object is the sole instance of `watchdog.WatchDogTimer` when available or ``None`` otherwise."""
//|
const mp_obj_module_t mcu_pin_module = {
.base = { &mp_type_module },
.globals = (mp_obj_dict_t*)&mcu_pin_globals,
};
STATIC const mp_rom_map_elem_t mcu_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_microcontroller) },
{ MP_ROM_QSTR(MP_QSTR_cpu), MP_ROM_PTR(&common_hal_mcu_processor_obj) },
2021-01-28 17:06:30 -05:00
#if CIRCUITPY_PROCESSOR_COUNT > 1
{ MP_ROM_QSTR(MP_QSTR_cpus), MP_ROM_PTR(&common_hal_multi_processor_obj) },
#endif
{ MP_ROM_QSTR(MP_QSTR_delay_us), MP_ROM_PTR(&mcu_delay_us_obj) },
{ MP_ROM_QSTR(MP_QSTR_disable_interrupts), MP_ROM_PTR(&mcu_disable_interrupts_obj) },
{ MP_ROM_QSTR(MP_QSTR_enable_interrupts), MP_ROM_PTR(&mcu_enable_interrupts_obj) },
2018-01-02 21:25:41 -05:00
{ MP_ROM_QSTR(MP_QSTR_on_next_reset), MP_ROM_PTR(&mcu_on_next_reset_obj) },
{ MP_ROM_QSTR(MP_QSTR_reset), MP_ROM_PTR(&mcu_reset_obj) },
#if CIRCUITPY_INTERNAL_NVM_SIZE > 0
{ MP_ROM_QSTR(MP_QSTR_nvm), MP_ROM_PTR(&common_hal_mcu_nvm_obj) },
#else
{ MP_ROM_QSTR(MP_QSTR_nvm), MP_ROM_PTR(&mp_const_none_obj) },
#endif
#if CIRCUITPY_WATCHDOG
{ MP_ROM_QSTR(MP_QSTR_watchdog), MP_ROM_PTR(&common_hal_mcu_watchdogtimer_obj) },
#else
{ MP_ROM_QSTR(MP_QSTR_watchdog), MP_ROM_PTR(&mp_const_none_obj) },
#endif
{ MP_ROM_QSTR(MP_QSTR_ResetReason), MP_ROM_PTR(&mcu_reset_reason_type) },
2018-01-02 21:25:41 -05:00
{ MP_ROM_QSTR(MP_QSTR_RunMode), MP_ROM_PTR(&mcu_runmode_type) },
{ MP_ROM_QSTR(MP_QSTR_Pin), MP_ROM_PTR(&mcu_pin_type) },
{ MP_ROM_QSTR(MP_QSTR_pin), MP_ROM_PTR(&mcu_pin_module) },
{ MP_ROM_QSTR(MP_QSTR_Processor), MP_ROM_PTR(&mcu_processor_type) },
};
STATIC MP_DEFINE_CONST_DICT(mcu_module_globals, mcu_module_globals_table);
const mp_obj_module_t microcontroller_module = {
.base = { &mp_type_module },
.globals = (mp_obj_dict_t*)&mcu_module_globals,
};