circuitpython/main.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016-2017 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdint.h>
#include <string.h>

#include "extmod/vfs.h"
#include "extmod/vfs_fat.h"

#include "genhdr/mpversion.h"
#include "py/nlr.h"
#include "py/compile.h"
#include "py/frozenmod.h"
#include "py/mphal.h"
#include "py/runtime.h"
#include "py/repl.h"
#include "py/gc.h"
#include "py/stackctrl.h"

#include "shared/readline/readline.h"
#include "shared/runtime/pyexec.h"

#include "background.h"
#include "mpconfigboard.h"
#include "supervisor/background_callback.h"
#include "supervisor/board.h"
#include "supervisor/cpu.h"
#include "supervisor/filesystem.h"
#include "supervisor/memory.h"
#include "supervisor/port.h"
#include "supervisor/serial.h"
#include "supervisor/shared/autoreload.h"
#include "supervisor/shared/safe_mode.h"
#include "supervisor/shared/stack.h"
#include "supervisor/shared/status_leds.h"
#include "supervisor/shared/tick.h"
#include "supervisor/shared/traceback.h"
#include "supervisor/shared/translate.h"
#include "supervisor/shared/workflow.h"
#include "supervisor/usb.h"
#include "supervisor/workflow.h"

#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/microcontroller/Processor.h"
#include "shared-bindings/supervisor/Runtime.h"

#if CIRCUITPY_ALARM
#include "shared-bindings/alarm/__init__.h"
#endif

#if CIRCUITPY_ATEXIT
#include "shared-module/atexit/__init__.h"
#endif

#if CIRCUITPY_BLEIO
#include "shared-bindings/_bleio/__init__.h"
#include "supervisor/shared/bluetooth/bluetooth.h"
#endif

#if CIRCUITPY_BOARD
#include "shared-module/board/__init__.h"
#endif

#if CIRCUITPY_CANIO
#include "common-hal/canio/CAN.h"
#endif

#if CIRCUITPY_DISPLAYIO
#include "shared-module/displayio/__init__.h"
#endif

#if CIRCUITPY_KEYPAD
#include "shared-module/keypad/__init__.h"
#endif

#if CIRCUITPY_MEMORYMONITOR
#include "shared-module/memorymonitor/__init__.h"
#endif

#if CIRCUITPY_USB_HID
#include "shared-module/usb_hid/__init__.h"
#endif

#if CIRCUITPY_WIFI
#include "shared-bindings/wifi/__init__.h"
#endif

#if CIRCUITPY_BOOT_COUNTER
#include "shared-bindings/nvm/ByteArray.h"
uint8_t value_out = 0;
#endif

#if MICROPY_ENABLE_PYSTACK
static size_t PLACE_IN_DTCM_BSS(_pystack[CIRCUITPY_PYSTACK_SIZE / sizeof(size_t)]);
#endif

static void reset_devices(void) {
    #if CIRCUITPY_BLEIO_HCI
    bleio_reset();
    #endif
}

STATIC void start_mp(supervisor_allocation *heap, bool first_run) {
    autoreload_stop();
    supervisor_workflow_reset();

    // Stack limit should be less than real stack size, so we have a chance
    // to recover from limit hit.  (Limit is measured in bytes.)
    mp_stack_ctrl_init();

    if (stack_get_bottom() != NULL) {
        mp_stack_set_limit(stack_get_length() - 1024);
    }


    #if MICROPY_MAX_STACK_USAGE
    // _ezero (same as _ebss) is an int, so start 4 bytes above it.
    if (stack_get_bottom() != NULL) {
        mp_stack_set_bottom(stack_get_bottom());
        mp_stack_fill_with_sentinel();
    }
    #endif

    // Sync the file systems in case any used RAM from the GC to cache. As soon
    // as we re-init the GC all bets are off on the cache.
    filesystem_flush();

    // Clear the readline history. It references the heap we're about to destroy.
    readline_init0();

    #if MICROPY_ENABLE_PYSTACK
    mp_pystack_init(_pystack, _pystack + (sizeof(_pystack) / sizeof(size_t)));
    #endif

    #if MICROPY_ENABLE_GC
    gc_init(heap->ptr, heap->ptr + get_allocation_length(heap) / 4);
    #endif
    mp_init();
    mp_obj_list_init((mp_obj_list_t *)mp_sys_path, 0);
    mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_)); // current dir (or base dir of the script)
    mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR__slash_));
    // Frozen modules are in their own pseudo-dir, e.g., ".frozen".
    // Prioritize .frozen over /lib.
    mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_FROZEN_FAKE_DIR_QSTR));
    mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR__slash_lib));

    mp_obj_list_init((mp_obj_list_t *)mp_sys_argv, 0);

    #if CIRCUITPY_ALARM
    // Record which alarm woke us up, if any. An object may be created so the heap must be functional.
    // There is no alarm if this is not the first time code.py or the REPL has been run.
    shared_alarm_save_wake_alarm(first_run ? common_hal_alarm_create_wake_alarm() : mp_const_none);
    // Reset alarm module only after we retrieved the wakeup alarm.
    alarm_reset();
    #endif
}

STATIC void stop_mp(void) {
    #if MICROPY_VFS
    mp_vfs_mount_t *vfs = MP_STATE_VM(vfs_mount_table);

    // Unmount all heap allocated vfs mounts.
    while (gc_nbytes(vfs) > 0) {
        vfs = vfs->next;
    }
    MP_STATE_VM(vfs_mount_table) = vfs;
    MP_STATE_VM(vfs_cur) = vfs;
    #endif

    background_callback_reset();

    #if CIRCUITPY_USB
    usb_background();
    #endif

    gc_deinit();
}

#define STRING_LIST(...) {__VA_ARGS__, ""}

// Look for the first file that exists in the list of filenames, using mp_import_stat().
// Return its index. If no file found, return -1.
STATIC const char *first_existing_file_in_list(const char *const *filenames) {
    for (int i = 0; filenames[i] != (char *)""; i++) {
        mp_import_stat_t stat = mp_import_stat(filenames[i]);
        if (stat == MP_IMPORT_STAT_FILE) {
            return filenames[i];
        }
    }
    return NULL;
}

STATIC bool maybe_run_list(const char *const *filenames, pyexec_result_t *exec_result) {
    const char *filename = first_existing_file_in_list(filenames);
    if (filename == NULL) {
        return false;
    }
    mp_hal_stdout_tx_str(filename);
    serial_write_compressed(translate(" output:\n"));
    pyexec_file(filename, exec_result);
    #if CIRCUITPY_ATEXIT
    shared_module_atexit_execute(exec_result);
    #endif
    return true;
}

STATIC void count_strn(void *data, const char *str, size_t len) {
    *(size_t *)data += len;
}

STATIC void cleanup_after_vm(supervisor_allocation *heap, mp_obj_t exception) {
    // Get the traceback of any exception from this run off the heap.
    // MP_OBJ_SENTINEL means "this run does not contribute to traceback storage, don't touch it"
    // MP_OBJ_NULL (=0) means "this run completed successfully, clear any stored traceback"
    if (exception != MP_OBJ_SENTINEL) {
        free_memory(prev_traceback_allocation);
        // ReloadException is exempt from traceback printing in pyexec_file(), so treat it as "no
        // traceback" here too.
        if (exception && exception != MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_reload_exception))) {
            size_t traceback_len = 0;
            mp_print_t print_count = {&traceback_len, count_strn};
            mp_obj_print_exception(&print_count, exception);
            prev_traceback_allocation = allocate_memory(align32_size(traceback_len + 1), false, true);
            // Empirically, this never fails in practice - even when the heap is totally filled up
            // with single-block-sized objects referenced by a root pointer, exiting the VM frees
            // up several hundred bytes, sufficient for the traceback (which tends to be shortened
            // because there wasn't memory for the full one). There may be convoluted ways of
            // making it fail, but at this point I believe they are not worth spending code on.
            if (prev_traceback_allocation != NULL) {
                vstr_t vstr;
                vstr_init_fixed_buf(&vstr, traceback_len, (char *)prev_traceback_allocation->ptr);
                mp_print_t print = {&vstr, (mp_print_strn_t)vstr_add_strn};
                mp_obj_print_exception(&print, exception);
                ((char *)prev_traceback_allocation->ptr)[traceback_len] = '\0';
            }
        } else {
            prev_traceback_allocation = NULL;
        }
    }

    // Reset port-independent devices, like CIRCUITPY_BLEIO_HCI.
    reset_devices();

    #if CIRCUITPY_ATEXIT
    atexit_reset();
    #endif

    // Turn off the display and flush the filesystem before the heap disappears.
    #if CIRCUITPY_DISPLAYIO
    reset_displays();
    #endif

    #if CIRCUITPY_MEMORYMONITOR
    memorymonitor_reset();
    #endif

    filesystem_flush();
    stop_mp();
    free_memory(heap);
    supervisor_move_memory();

    #if CIRCUITPY_CANIO
    common_hal_canio_reset();
    #endif

    #if CIRCUITPY_KEYPAD
    keypad_reset();
    #endif

    // reset_board_busses() first because it may release pins from the never_reset state, so that
    // reset_port() can reset them.
    #if CIRCUITPY_BOARD
    reset_board_busses();
    #endif
    reset_port();
    reset_board();
}

STATIC void print_code_py_status_message(safe_mode_t safe_mode) {
    if (autoreload_is_enabled()) {
        serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n"));
    } else {
        serial_write_compressed(translate("Auto-reload is off.\n"));
    }
    if (safe_mode != NO_SAFE_MODE) {
        serial_write_compressed(translate("Running in safe mode! Not running saved code.\n"));
    }
}

STATIC bool run_code_py(safe_mode_t safe_mode, bool first_run, bool *simulate_reset) {
    bool serial_connected_at_start = serial_connected();
    bool printed_safe_mode_message = false;
    #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
    if (serial_connected_at_start) {
        serial_write("\r\n");
        print_code_py_status_message(safe_mode);
        print_safe_mode_message(safe_mode);
        printed_safe_mode_message = true;
    }
    #endif

    pyexec_result_t result;

    result.return_code = 0;
    result.exception = MP_OBJ_NULL;
    result.exception_line = 0;

    bool skip_repl;
    bool skip_wait = false;
    bool found_main = false;
    uint8_t next_code_options = 0;
    // Collects stickiness bits that apply in the current situation.
    uint8_t next_code_stickiness_situation = SUPERVISOR_NEXT_CODE_OPT_NEWLY_SET;

    if (safe_mode == NO_SAFE_MODE) {
        static const char *const supported_filenames[] = STRING_LIST(
            "code.txt", "code.py", "main.py", "main.txt");
        #if CIRCUITPY_FULL_BUILD
        static const char *const double_extension_filenames[] = STRING_LIST(
            "code.txt.py", "code.py.txt", "code.txt.txt","code.py.py",
            "main.txt.py", "main.py.txt", "main.txt.txt","main.py.py");
        #endif

        stack_resize();
        filesystem_flush();
        supervisor_allocation *heap = allocate_remaining_memory();

        // Prepare the VM state. Includes an alarm check/reset for sleep.
        start_mp(heap, first_run);

        #if CIRCUITPY_USB
        usb_setup_with_vm();
        #endif

        // Check if a different run file has been allocated
        if (next_code_allocation) {
            ((next_code_info_t *)next_code_allocation->ptr)->options &= ~SUPERVISOR_NEXT_CODE_OPT_NEWLY_SET;
            next_code_options = ((next_code_info_t *)next_code_allocation->ptr)->options;
            if (((next_code_info_t *)next_code_allocation->ptr)->filename[0] != '\0') {
                const char *next_list[] = {((next_code_info_t *)next_code_allocation->ptr)->filename, ""};
                // This is where the user's python code is actually executed:
                found_main = maybe_run_list(next_list, &result);
                if (!found_main) {
                    serial_write(((next_code_info_t *)next_code_allocation->ptr)->filename);
                    serial_write_compressed(translate(" not found.\n"));
                }
            }
        }
        // Otherwise, default to the standard list of filenames
        if (!found_main) {
            // This is where the user's python code is actually executed:
            found_main = maybe_run_list(supported_filenames, &result);
            // If that didn't work, double check the extensions
            #if CIRCUITPY_FULL_BUILD
            if (!found_main) {
                found_main = maybe_run_list(double_extension_filenames, &result);
                if (found_main) {
                    serial_write_compressed(translate("WARNING: Your code filename has two extensions\n"));
                }
            }
            #else
            (void)found_main;
            #endif
        }

        // Print done before resetting everything so that we get the message over
        // BLE before it is reset and we have a delay before reconnect.
        if (reload_requested && result.return_code == PYEXEC_EXCEPTION) {
            serial_write_compressed(translate("\nCode stopped by auto-reload.\n"));
        } else {
            serial_write_compressed(translate("\nCode done running.\n"));
        }

        // Finished executing python code. Cleanup includes a board reset.
        cleanup_after_vm(heap, result.exception);

        // If a new next code file was set, that is a reason to keep it (obviously). Stuff this into
        // the options because it can be treated like any other reason-for-stickiness bit. The
        // source is different though: it comes from the options that will apply to the next run,
        // while the rest of next_code_options is what applied to this run.
        if (next_code_allocation != NULL && (((next_code_info_t *)next_code_allocation->ptr)->options & SUPERVISOR_NEXT_CODE_OPT_NEWLY_SET)) {
            next_code_options |= SUPERVISOR_NEXT_CODE_OPT_NEWLY_SET;
        }

        if (reload_requested) {
            next_code_stickiness_situation |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_RELOAD;
        } else if (result.return_code == 0) {
            next_code_stickiness_situation |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_SUCCESS;
            if (next_code_options & SUPERVISOR_NEXT_CODE_OPT_RELOAD_ON_SUCCESS) {
                skip_repl = true;
                skip_wait = true;
            }
        } else {
            next_code_stickiness_situation |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_ERROR;
            // Deep sleep cannot be skipped
            // TODO: settings in deep sleep should persist, using a new sleep memory API
            if (next_code_options & SUPERVISOR_NEXT_CODE_OPT_RELOAD_ON_ERROR
                && !(result.return_code & PYEXEC_DEEP_SLEEP)) {
                skip_repl = true;
                skip_wait = true;
            }
        }
        if (result.return_code & PYEXEC_FORCED_EXIT) {
            skip_repl = reload_requested;
            skip_wait = true;
        }
    }

    // Program has finished running.
    bool printed_press_any_key = false;
    #if CIRCUITPY_DISPLAYIO
    size_t time_to_epaper_refresh = 1;
    #endif

    // Setup LED blinks.
    #if CIRCUITPY_STATUS_LED
    uint32_t color;
    uint8_t blink_count;
    bool led_active = false;
    #if CIRCUITPY_ALARM
    if (result.return_code & PYEXEC_DEEP_SLEEP) {
        color = BLACK;
        blink_count = 0;
    } else
    #endif
    if (result.return_code != PYEXEC_EXCEPTION) {
        if (safe_mode == NO_SAFE_MODE) {
            color = ALL_DONE;
            blink_count = ALL_DONE_BLINKS;
        } else {
            color = SAFE_MODE;
            blink_count = SAFE_MODE_BLINKS;
        }
    } else {
        color = EXCEPTION;
        blink_count = EXCEPTION_BLINKS;
    }
    size_t pattern_start = supervisor_ticks_ms32();
    size_t single_blink_time = (OFF_ON_RATIO + 1) * BLINK_TIME_MS;
    size_t blink_time = single_blink_time * blink_count;
    size_t total_time = blink_time + LED_SLEEP_TIME_MS;
    #endif

    #if CIRCUITPY_ALARM
    bool fake_sleeping = false;
    #endif
    while (!skip_wait) {
        RUN_BACKGROUND_TASKS;

        // If a reload was requested by the supervisor or autoreload, return
        if (reload_requested) {
            next_code_stickiness_situation |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_RELOAD;
            // Should the STICKY_ON_SUCCESS and STICKY_ON_ERROR bits be cleared in
            // next_code_stickiness_situation? I can see arguments either way, but I'm deciding
            // "no" for now, mainly because it's a bit less code. At this point, we have both a
            // success or error and a reload, so let's have both of the respective options take
            // effect (in OR combination).
            reload_requested = false;
            skip_repl = true;
            break;
        }

        // If interrupted by keyboard, return
        if (serial_connected() && serial_bytes_available()) {
            // Skip REPL if reload was requested.
            skip_repl = serial_read() == CHAR_CTRL_D;
            if (skip_repl) {
                supervisor_set_run_reason(RUN_REASON_REPL_RELOAD);
            }
            break;
        }

        // Check for a deep sleep alarm and restart the VM. This can happen if
        // an alarm alerts faster than our USB delay or if we pretended to deep
        // sleep.
        #if CIRCUITPY_ALARM
        if (fake_sleeping && common_hal_alarm_woken_from_sleep()) {
            serial_write_compressed(translate("Woken up by alarm.\n"));
            supervisor_set_run_reason(RUN_REASON_STARTUP);
            skip_repl = true;
            break;
        }
        #endif

        // If messages haven't been printed yet, print them
        if (!printed_press_any_key && serial_connected()) {
            if (!serial_connected_at_start) {
                print_code_py_status_message(safe_mode);
            }

            if (!printed_safe_mode_message) {
                print_safe_mode_message(safe_mode);
                printed_safe_mode_message = true;
            }
            serial_write("\r\n");
            serial_write_compressed(translate("Press any key to enter the REPL. Use CTRL-D to reload.\n"));
            printed_press_any_key = true;
        }
        if (!serial_connected()) {
            serial_connected_at_start = false;
            printed_press_any_key = false;
        }

        // Sleep until our next interrupt.
        #if CIRCUITPY_ALARM
        if (result.return_code & PYEXEC_DEEP_SLEEP) {
            // Make sure we have been awake long enough for USB to connect (enumeration delay).
            int64_t connecting_delay_ticks = CIRCUITPY_USB_CONNECTED_SLEEP_DELAY * 1024 - port_get_raw_ticks(NULL);
            // Until it's safe to decide whether we're real/fake sleeping
            if (fake_sleeping) {
                // This waits until a pretend deep sleep alarm occurs. They are set
                // during common_hal_alarm_set_deep_sleep_alarms. On some platforms
                // it may also return due to another interrupt, that's why we check
                // for deep sleep alarms above. If it wasn't a deep sleep alarm,
                // then we'll idle here again.
                common_hal_alarm_pretending_deep_sleep();
            } else if (connecting_delay_ticks < 0) {
                // Entering deep sleep (may be fake or real.)
                status_led_deinit();
                deinit_rxtx_leds();
                board_deinit();
                if (!supervisor_workflow_active()) {
                    // Enter true deep sleep. When we wake up we'll be back at the
                    // top of main(), not in this loop.
                    common_hal_alarm_enter_deep_sleep();
                    // Does not return.
                } else {
                    serial_write_compressed(translate("Pretending to deep sleep until alarm, CTRL-C or file write.\n"));
                    fake_sleeping = true;
                }
            } else {
                // Loop while checking the time. We can't idle because we don't want to override a
                // time alarm set for the deep sleep.
            }
        } else
        #endif
        {
            // Refresh the ePaper display if we have one. That way it'll show an error message.
            #if CIRCUITPY_DISPLAYIO
            if (time_to_epaper_refresh > 0) {
                time_to_epaper_refresh = maybe_refresh_epaperdisplay();
            }

            #if !CIRCUITPY_STATUS_LED
            port_interrupt_after_ticks(time_to_epaper_refresh);
            #endif
            #endif

            #if CIRCUITPY_STATUS_LED
            uint32_t tick_diff = supervisor_ticks_ms32() - pattern_start;

            // By default, don't sleep.
            size_t time_to_next_change = 0;
            if (tick_diff < blink_time) {
                uint32_t blink_diff = tick_diff % (single_blink_time);
                if (blink_diff >= BLINK_TIME_MS) {
                    if (led_active) {
                        new_status_color(BLACK);
                        status_led_deinit();
                        led_active = false;
                    }
                    time_to_next_change = single_blink_time - blink_diff;
                } else {
                    if (!led_active) {
                        status_led_init();
                        new_status_color(color);
                        led_active = true;
                    }
                    time_to_next_change = BLINK_TIME_MS - blink_diff;
                }
            } else if (tick_diff > total_time) {
                pattern_start = supervisor_ticks_ms32();
            } else {
                if (led_active) {
                    new_status_color(BLACK);
                    status_led_deinit();
                    led_active = false;
                }
                time_to_next_change = total_time - tick_diff;
            }
            #if CIRCUITPY_DISPLAYIO
            if (time_to_epaper_refresh > 0 && time_to_next_change > 0) {
                time_to_next_change = MIN(time_to_next_change, time_to_epaper_refresh);
            }
            #endif

            // time_to_next_change is in ms and ticks are slightly shorter so
            // we'll undersleep just a little. It shouldn't matter.
            port_interrupt_after_ticks(time_to_next_change);
            #endif
            port_idle_until_interrupt();
        }
    }

    // free code allocation if unused
    if ((next_code_options & next_code_stickiness_situation) == 0) {
        free_memory(next_code_allocation);
        next_code_allocation = NULL;
    }

    // Done waiting, start the board back up.
    #if CIRCUITPY_STATUS_LED
    if (led_active) {
        new_status_color(BLACK);
        status_led_deinit();
    }
    #endif

    #if CIRCUITPY_ALARM
    if (fake_sleeping) {
        board_init();
        // Pretend that the next run is the first run, as if we were reset.
        *simulate_reset = true;
    }
    #endif

    return skip_repl;
}

vstr_t *boot_output;

STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
    // If not in safe mode, run boot before initing USB and capture output in a file.

    // There is USB setup to do even if boot.py is not actually run.
    const bool ok_to_run = filesystem_present()
        && safe_mode == NO_SAFE_MODE
        && MP_STATE_VM(vfs_mount_table) != NULL;

    static const char *const boot_py_filenames[] = STRING_LIST("boot.py", "boot.txt");

    // Do USB setup even if boot.py is not run.

    supervisor_allocation *heap = allocate_remaining_memory();

    // true means this is the first set of VM's after a hard reset.
    start_mp(heap, true);

    #if CIRCUITPY_USB
    // Set up default USB values after boot.py VM starts but before running boot.py.
    usb_set_defaults();
    #endif

    pyexec_result_t result = {0, MP_OBJ_NULL, 0};

    if (ok_to_run) {
        #ifdef CIRCUITPY_BOOT_OUTPUT_FILE
        vstr_t boot_text;
        vstr_init(&boot_text, 512);
        boot_output = &boot_text;
        #endif

        // Write version info
        mp_printf(&mp_plat_print, "%s\nBoard ID:%s\n", MICROPY_FULL_VERSION_INFO, CIRCUITPY_BOARD_ID);

        bool found_boot = maybe_run_list(boot_py_filenames, &result);
        (void)found_boot;


        #ifdef CIRCUITPY_BOOT_OUTPUT_FILE
        // Get the base filesystem.
        fs_user_mount_t *vfs = (fs_user_mount_t *)MP_STATE_VM(vfs_mount_table)->obj;
        FATFS *fs = &vfs->fatfs;

        boot_output = NULL;
        bool write_boot_output = true;
        FIL boot_output_file;
        if (f_open(fs, &boot_output_file, CIRCUITPY_BOOT_OUTPUT_FILE, FA_READ) == FR_OK) {
            char *file_contents = m_new(char, boot_text.alloc);
            UINT chars_read;
            if (f_read(&boot_output_file, file_contents, 1 + boot_text.len, &chars_read) == FR_OK) {
                write_boot_output =
                    (chars_read != boot_text.len) || (memcmp(boot_text.buf, file_contents, chars_read) != 0);
            }
            // no need to f_close the file
        }

        if (write_boot_output) {
            // Wait 1 second before opening CIRCUITPY_BOOT_OUTPUT_FILE for write,
            // in case power is momentary or will fail shortly due to, say a low, battery.
            mp_hal_delay_ms(1000);

            // USB isn't up, so we can write the file.
            // operating at the oofatfs (f_open) layer means the usb concurrent write permission
            // is not even checked!
            f_open(fs, &boot_output_file, CIRCUITPY_BOOT_OUTPUT_FILE, FA_WRITE | FA_CREATE_ALWAYS);
            UINT chars_written;
            f_write(&boot_output_file, boot_text.buf, boot_text.len, &chars_written);
            f_close(&boot_output_file);
            filesystem_flush();
        }
        #endif
    }

    #if CIRCUITPY_USB
    // Some data needs to be carried over from the USB settings in boot.py
    // to the next VM, while the heap is still available.
    // Its size can vary, so save it temporarily on the stack,
    // and then when the heap goes away, copy it in into a
    // storage_allocation.
    size_t size = usb_boot_py_data_size();
    uint8_t usb_boot_py_data[size];
    usb_get_boot_py_data(usb_boot_py_data, size);
    #endif

    cleanup_after_vm(heap, result.exception);

    #if CIRCUITPY_USB
    // Now give back the data we saved from the heap going away.
    usb_return_boot_py_data(usb_boot_py_data, size);
    #endif
}

STATIC int run_repl(bool first_run) {
    int exit_code = PYEXEC_FORCED_EXIT;
    stack_resize();
    filesystem_flush();
    supervisor_allocation *heap = allocate_remaining_memory();
    start_mp(heap, first_run);

    #if CIRCUITPY_USB
    usb_setup_with_vm();
    #endif

    autoreload_suspend(AUTORELOAD_LOCK_REPL);

    // Set the status LED to the REPL color before running the REPL. For
    // NeoPixels and DotStars this will be sticky but for PWM or single LED it
    // won't. This simplifies pin sharing because they won't be in use when
    // actually in the REPL.
    #if CIRCUITPY_STATUS_LED
    status_led_init();
    new_status_color(REPL_RUNNING);
    status_led_deinit();
    #endif
    if (pyexec_mode_kind == PYEXEC_MODE_RAW_REPL) {
        exit_code = pyexec_raw_repl();
    } else {
        exit_code = pyexec_friendly_repl();
    }
    #if CIRCUITPY_ATEXIT
    pyexec_result_t result;
    shared_module_atexit_execute(&result);
    if (result.return_code == PYEXEC_DEEP_SLEEP) {
        exit_code = PYEXEC_DEEP_SLEEP;
    }
    #endif
    cleanup_after_vm(heap, MP_OBJ_SENTINEL);
    #if CIRCUITPY_STATUS_LED
    status_led_init();
    new_status_color(BLACK);
    status_led_deinit();
    #endif

    autoreload_resume(AUTORELOAD_LOCK_REPL);
    return exit_code;
}

int __attribute__((used)) main(void) {
    // initialise the cpu and peripherals
    safe_mode_t safe_mode = port_init();

    // Turn on RX and TX LEDs if we have them.
    init_rxtx_leds();

    #if CIRCUITPY_BOOT_COUNTER
    // Increment counter before possibly entering safe mode
    common_hal_nvm_bytearray_get_bytes(&common_hal_mcu_nvm_obj,0,1,&value_out);
    ++value_out;
    common_hal_nvm_bytearray_set_bytes(&common_hal_mcu_nvm_obj,0,&value_out,1);
    #endif

    // Wait briefly to give a reset window where we'll enter safe mode after the reset.
    if (safe_mode == NO_SAFE_MODE) {
        safe_mode = wait_for_safe_mode_reset();
    }

    stack_init();

    #if CIRCUITPY_BLEIO
    // Early init so that a reset press can cause BLE public advertising.
    supervisor_bluetooth_init();
    #endif

    // Start the debug serial
    serial_early_init();

    // Create a new filesystem only if we're not in a safe mode.
    // A power brownout here could make it appear as if there's
    // no SPI flash filesystem, and we might erase the existing one.
    filesystem_init(safe_mode == NO_SAFE_MODE, false);

    // displays init after filesystem, since they could share the flash SPI
    board_init();

    // Reset everything and prep MicroPython to run boot.py.
    reset_port();
    // Port-independent devices, like CIRCUITPY_BLEIO_HCI.
    reset_devices();
    reset_board();

    // This is first time we are running CircuitPython after a reset or power-up.
    supervisor_set_run_reason(RUN_REASON_STARTUP);

    // If not in safe mode turn on autoreload by default but before boot.py in case it wants to change it.
    if (safe_mode == NO_SAFE_MODE) {
        autoreload_enable();
    }

    // By default our internal flash is readonly to local python code and
    // writable over USB. Set it here so that boot.py can change it.
    filesystem_set_internal_concurrent_write_protection(true);
    filesystem_set_internal_writable_by_usb(true);

    run_boot_py(safe_mode);

    // Start USB after giving boot.py a chance to tweak behavior.
    #if CIRCUITPY_USB
    // Setup USB connection after heap is available.
    // It needs the heap to build descriptors.
    usb_init();
    #endif

    // Set up any other serial connection.
    serial_init();

    #if CIRCUITPY_BLEIO
    supervisor_bluetooth_enable_workflow();
    supervisor_start_bluetooth();
    #endif

    // Boot script is finished, so now go into REPL or run code.py.
    int exit_code = PYEXEC_FORCED_EXIT;
    bool skip_repl = true;
    bool first_run = true;
    bool simulate_reset;
    for (;;) {
        simulate_reset = false;
        if (!skip_repl) {
            exit_code = run_repl(first_run);
            supervisor_set_run_reason(RUN_REASON_REPL_RELOAD);
        }
        if (exit_code == PYEXEC_FORCED_EXIT) {
            if (!first_run) {
                serial_write_compressed(translate("soft reboot\n"));
            }
            if (pyexec_mode_kind == PYEXEC_MODE_FRIENDLY_REPL) {
                skip_repl = run_code_py(safe_mode, first_run, &simulate_reset);
            } else {
                skip_repl = false;
            }
        } else if (exit_code != 0) {
            break;
        }

        // Either the REPL or code.py has run and finished.
        // If code.py did a fake deep sleep, pretend that we are running code.py for
        // the first time after a hard reset. This will preserve any alarm information.
        first_run = simulate_reset;
    }
    mp_deinit();
    return 0;
}

void gc_collect(void) {
    gc_collect_start();

    mp_uint_t regs[10];
    mp_uint_t sp = cpu_get_regs_and_sp(regs);

    // This collects root pointers from the VFS mount table. Some of them may
    // have lost their references in the VM even though they are mounted.
    gc_collect_root((void **)&MP_STATE_VM(vfs_mount_table), sizeof(mp_vfs_mount_t) / sizeof(mp_uint_t));

    background_callback_gc_collect();

    #if CIRCUITPY_ALARM
    common_hal_alarm_gc_collect();
    #endif

    #if CIRCUITPY_ATEXIT
    atexit_gc_collect();
    #endif

    #if CIRCUITPY_DISPLAYIO
    displayio_gc_collect();
    #endif

    #if CIRCUITPY_BLEIO
    common_hal_bleio_gc_collect();
    #endif

    #if CIRCUITPY_USB_HID
    usb_hid_gc_collect();
    #endif

    #if CIRCUITPY_WIFI
    common_hal_wifi_gc_collect();
    #endif

    // This naively collects all object references from an approximate stack
    // range.
    gc_collect_root((void **)sp, ((mp_uint_t)port_stack_get_top() - sp) / sizeof(mp_uint_t));
    gc_collect_end();
}

void NORETURN nlr_jump_fail(void *val) {
    reset_into_safe_mode(MICROPY_NLR_JUMP_FAIL);
    while (true) {
    }
}

#ifndef NDEBUG
static void NORETURN __fatal_error(const char *msg) {
    reset_into_safe_mode(MICROPY_FATAL_ERROR);
    while (true) {
    }
}

void MP_WEAK __assert_func(const char *file, int line, const char *func, const char *expr) {
    mp_printf(&mp_plat_print, "Assertion '%s' failed, at file %s:%d\n", expr, file, line);
    __fatal_error("Assertion failed");
}
#endif