circuitpython/ports/rp2/boards/PIMORONI_TINY2040/mpconfigboard.h

// https://shop.pimoroni.com/products/tiny-2040

#define MICROPY_HW_BOARD_NAME          "Pimoroni Tiny 2040"
#define MICROPY_HW_FLASH_STORAGE_BYTES (7 * 1024 * 1024)

#define MICROPY_HW_USB_VID (0x16D0)
#define MICROPY_HW_USB_PID (0x08C7)

// I2C0 (non-default)
#define MICROPY_HW_I2C0_SCL  (4)
#define MICROPY_HW_I2C0_SDA  (5)

// RGB LED, active low
// Red LED 18
// Green LED 19
// Blue LED 20

// Boot button GPIO23
rp2/boards: Add Pimoroni Tiny 2040. 2021-07-23 12:15:58 -04:00			`// https://shop.pimoroni.com/products/tiny-2040`

			`#define MICROPY_HW_BOARD_NAME "Pimoroni Tiny 2040"`
			`#define MICROPY_HW_FLASH_STORAGE_BYTES (7 * 1024 * 1024)`

			`#define MICROPY_HW_USB_VID (0x16D0)`
			`#define MICROPY_HW_USB_PID (0x08C7)`

rp2/boards: Remove all I2C,SPI pin defs that already match pico-sdk. I.e. for whichever SPI/I2C instance is PICO_DEFAULT_I2C, there's no need to set MICROPY_HW_SPIn_SCK. The only ones remaining are for the non-default instance. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2022-09-06 09:32:34 -04:00			`// I2C0 (non-default)`
rp2/boards: Add Pimoroni Tiny 2040. 2021-07-23 12:15:58 -04:00			`#define MICROPY_HW_I2C0_SCL (4)`
			`#define MICROPY_HW_I2C0_SDA (5)`

			`// RGB LED, active low`
			`// Red LED 18`
			`// Green LED 19`
			`// Blue LED 20`

			`// Boot button GPIO23`