circuitpython/qemu-arm/Makefile

94 lines
2.8 KiB
Makefile
Raw Normal View History

2014-04-16 12:27:23 -04:00
include ../py/mkenv.mk
-include mpconfigport.mk
# qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I..
2014-04-21 16:08:15 -04:00
INC += -I$(BUILD)
INC += -I../tools/tinytest/
2014-04-21 16:08:15 -04:00
2014-04-16 12:27:23 -04:00
CFLAGS_CORTEX_M3 = -mthumb -mcpu=cortex-m3
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -ansi -std=gnu99 $(CFLAGS_CORTEX_M3) $(COPT) \
-flto -ffunction-sections -fdata-sections
2014-04-16 12:27:23 -04:00
#Debugging/Optimization
ifeq ($(DEBUG), 1)
CFLAGS += -g -DPENDSV_DEBUG
COPT = -O0
else
COPT += -Os -DNDEBUG
endif
## With CoudeSourcery it's actually a little different, you just need `-T generic-m-hosted.ld`.
## Although for some reason `$(LD)` will not find that linker script, it works with `$(CC)`.
## It turns out that this is specific to CoudeSourcery, and ARM version of GCC ships something
## else instead and according to the following files, this is what we need to pass to `$(CC).
## - gcc-arm-none-eabi-4_8-2014q1/share/gcc-arm-none-eabi/samples/src/makefile.conf
## - gcc-arm-none-eabi-4_8-2014q1/share/gcc-arm-none-eabi/samples/src/qemu/Makefile
LDFLAGS= --specs=nano.specs --specs=rdimon.specs -Wl,--gc-sections -Wl,-Map=$(@:.elf=.map)
2014-04-16 12:27:23 -04:00
SRC_C = \
main.c \
2014-04-16 12:27:23 -04:00
SRC_TEST_C = \
test_main.c \
qemu-arm: fully integrated test suite. This is primarily intended to provide testing of Thumb-specific code within Travis CI as well as if anyone else want to run it locally. As discussed in purposes. This is currently agains an emulated Cortex-M3 core, however in the near future it can extended to support M0, M0+ as well M4 (work in progress exists in sushihangover/qemu). It's probably true that most of the code base can be covered running uPy natively on a POSIX system, however we do have the tiny bit of assembly code. There may exist bugs related to endianness and type aliases, let alone potential standard library or compiler bugs or even architecture-specific optimisations. This could also incorporate lwIP (or other TCP/IP stack) integration as well as SDIO+FATFS drivers. The solution to inline the test cases was chose due to simplicity. It could alternatively be implemented in a number of different way (see #515), but this looked the simplest. Inclusion of tinytest was just to avoid writing boilerplate code for counting failed tests and other utility functions. Currently only a few functions are used, however this could be extended. Checking in the code instead of using submodule was a personal preference, but if people do want the pain of submodules, this can provided. This particular framework is also pretty good if one desires to run unit test on target. The approach with scripts being inlined is probably not quite suited for the size of memory an MCU has, but the tinytest itself should be good, if lower-level C code is to be unit tested.
2014-05-05 12:06:45 -04:00
STM_SRC_C = $(addprefix stmhal/,\
pybstdio.c \
)
2014-04-16 12:27:23 -04:00
SRC_S = \
OBJ =
OBJ += $(PY_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
OBJ += $(addprefix $(BUILD)/, $(STM_SRC_C:.c=.o))
2014-04-16 12:27:23 -04:00
OBJ_TEST =
OBJ_TEST += $(PY_O)
OBJ_TEST += $(addprefix $(BUILD)/, $(SRC_TEST_C:.c=.o))
OBJ_TEST += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
OBJ_TEST += $(addprefix $(BUILD)/, $(STM_SRC_C:.c=.o))
OBJ_TEST += $(BUILD)/tinytest.o
qemu-arm: fully integrated test suite. This is primarily intended to provide testing of Thumb-specific code within Travis CI as well as if anyone else want to run it locally. As discussed in purposes. This is currently agains an emulated Cortex-M3 core, however in the near future it can extended to support M0, M0+ as well M4 (work in progress exists in sushihangover/qemu). It's probably true that most of the code base can be covered running uPy natively on a POSIX system, however we do have the tiny bit of assembly code. There may exist bugs related to endianness and type aliases, let alone potential standard library or compiler bugs or even architecture-specific optimisations. This could also incorporate lwIP (or other TCP/IP stack) integration as well as SDIO+FATFS drivers. The solution to inline the test cases was chose due to simplicity. It could alternatively be implemented in a number of different way (see #515), but this looked the simplest. Inclusion of tinytest was just to avoid writing boilerplate code for counting failed tests and other utility functions. Currently only a few functions are used, however this could be extended. Checking in the code instead of using submodule was a personal preference, but if people do want the pain of submodules, this can provided. This particular framework is also pretty good if one desires to run unit test on target. The approach with scripts being inlined is probably not quite suited for the size of memory an MCU has, but the tinytest itself should be good, if lower-level C code is to be unit tested.
2014-05-05 12:06:45 -04:00
# List of sources for qstr extraction
SRC_QSTR += $(SRC_C) $(STM_SRC_C)
all: run
run: $(BUILD)/firmware.elf
qemu-system-arm -machine integratorcp -cpu cortex-m3 -nographic -monitor null -serial null -semihosting -kernel $(BUILD)/firmware.elf
test: $(BUILD)/firmware-test.elf
qemu-system-arm -machine integratorcp -cpu cortex-m3 -nographic -monitor null -serial null -semihosting -kernel $(BUILD)/firmware-test.elf > $(BUILD)/console.out
$(Q)tail -n2 $(BUILD)/console.out
$(Q)tail -n1 $(BUILD)/console.out | grep -q "status: 0"
2014-04-16 12:27:23 -04:00
qemu-arm: fully integrated test suite. This is primarily intended to provide testing of Thumb-specific code within Travis CI as well as if anyone else want to run it locally. As discussed in purposes. This is currently agains an emulated Cortex-M3 core, however in the near future it can extended to support M0, M0+ as well M4 (work in progress exists in sushihangover/qemu). It's probably true that most of the code base can be covered running uPy natively on a POSIX system, however we do have the tiny bit of assembly code. There may exist bugs related to endianness and type aliases, let alone potential standard library or compiler bugs or even architecture-specific optimisations. This could also incorporate lwIP (or other TCP/IP stack) integration as well as SDIO+FATFS drivers. The solution to inline the test cases was chose due to simplicity. It could alternatively be implemented in a number of different way (see #515), but this looked the simplest. Inclusion of tinytest was just to avoid writing boilerplate code for counting failed tests and other utility functions. Currently only a few functions are used, however this could be extended. Checking in the code instead of using submodule was a personal preference, but if people do want the pain of submodules, this can provided. This particular framework is also pretty good if one desires to run unit test on target. The approach with scripts being inlined is probably not quite suited for the size of memory an MCU has, but the tinytest itself should be good, if lower-level C code is to be unit tested.
2014-05-05 12:06:45 -04:00
.PHONY: $(BUILD)/genhdr/tests.h
$(BUILD)/test_main.o: $(BUILD)/genhdr/tests.h
$(BUILD)/genhdr/tests.h:
$(Q)echo "Generating $@";(cd ../tests; ../tools/tinytest-codegen.py) > $@
$(BUILD)/tinytest.o:
$(Q)$(CC) $(CFLAGS) -DNO_FORKING -o $@ -c ../tools/tinytest/tinytest.c
## `$(LD)` doesn't seem to like `--specs` for some reason, but we can just use `$(CC)` here.
$(BUILD)/firmware.elf: $(OBJ)
$(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
2014-04-16 12:27:23 -04:00
$(Q)$(SIZE) $@
$(BUILD)/firmware-test.elf: $(OBJ_TEST)
$(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
2014-04-16 12:27:23 -04:00
include ../py/mkrules.mk