add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
#include "py/objtuple.h"
|
|
|
|
|
#include "shared-bindings/board/__init__.h"
|
2022-08-05 10:59:10 -04:00
|
|
|
#include "shared-module/displayio/__init__.h"
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
|
|
|
|
|
STATIC const mp_rom_obj_tuple_t camera_data_tuple = {
|
|
|
|
|
{&mp_type_tuple},
|
|
|
|
|
8,
|
|
|
|
|
{
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO11),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO9),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO8),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO10),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO12),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO18),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO17),
|
|
|
|
|
MP_ROM_PTR(&pin_GPIO16),
|
|
|
|
|
}
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
|
|
|
|
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
|
|
|
|
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_BUTTONS), MP_ROM_PTR(&pin_GPIO1) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MIC_SDO), MP_ROM_PTR(&pin_GPIO2) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, // LCD
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO4) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO5) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA), MP_ROM_PTR(&camera_data_tuple) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_CAMERA_VSYNC), MP_ROM_PTR(&pin_GPIO6) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_CAMERA_HREF), MP_ROM_PTR(&pin_GPIO7) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_CAMERA_PCLK), MP_ROM_PTR(&pin_GPIO13) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO14) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_CAMERA_XCLK), MP_ROM_PTR(&pin_GPIO15) },
|
2022-08-05 10:59:10 -04:00
|
|
|
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO47) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO21) },
|
|
|
|
|
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MISO1), MP_ROM_PTR(&pin_GPIO40) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MOSI1), MP_ROM_PTR(&pin_GPIO38) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_SCK1), MP_ROM_PTR(&pin_GPIO39) },
|
|
|
|
|
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MIC_SCK), MP_ROM_PTR(&pin_GPIO41) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_MIC_WS), MP_ROM_PTR(&pin_GPIO42) },
|
2022-08-05 10:59:10 -04:00
|
|
|
{ MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO43) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO44) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_BACKLIGHT), MP_ROM_PTR(&pin_GPIO48) },
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
|
|
|
|
|
2022-08-05 10:59:10 -04:00
|
|
|
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
};
|
|
|
|
|
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|