circuitpython/ports/mimxrt/README.md

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

76 lines
2.6 KiB
Markdown
Raw Normal View History

Port of MicroPython to NXP iMX RT 10xx
======================================
Currently supports Teensy 4.0, Teensy 4.1, and the
MIMXRT1010_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK, MIMXRT1060_EVK and
MIMXRT1064_EVK boards.
Features:
- REPL over USB VCP
- machine.ADC
- machine.I2C
- machine.LED
- machine.Pin
- machine.PWM
- machine.RTC
- machine.SDCard
- machine.SPI
- machine.Signal
- machine.SoftI2C
- machine.SoftSPI
- machine.Timer
- machine.UART
- LFS2 file system at the internal Flash
- SDCard support (not on MIMXRT1010_EVK)
- Ethernet (not on Teensy 4.0 and MIMXRT1010_EVK)
Known issues:
TODO:
- More peripherals (Counter, I2S, CAN, etc)
- More Python options
## Build Instructions
Before building the firmware for a given board the MicroPython cross-compiler
must be built; it will be used to pre-compile some of the built-in scripts to
bytecode. The cross-compiler is built and run on the host machine, using:
$ make -C mpy-cross
This command should be executed from the root directory of this repository.
All other commands below should be executed from the ports/mimxrt/ directory.
An ARM compiler is required for the build, along with the associated binary
utilities. The default compiler is `arm-none-eabi-gcc`, which is available for
Arch Linux via the package `arm-none-eabi-gcc`, for Ubuntu via instructions
[here](https://launchpad.net/~team-gcc-arm-embedded/+archive/ubuntu/ppa), or
see [here](https://launchpad.net/gcc-arm-embedded) for the main GCC ARM
Embedded page. The compiler can be changed using the `CROSS_COMPILE` variable
when invoking `make`.
In addition newlib is required which is available for Arch Linux via the
package `arm-none-eabi-newlib`, for Ubuntu/Debian install package `libnewlib-arm-none-eabi`
Next, the board to build must be selected. Any of the board names of the
subdirectories in the `boards/` directory is a valid board. The board name
must be passed as the argument to `BOARD=` when invoking `make`.
All boards require certain submodules to be obtained before they can be built.
The correct set of submodules can be initialised using (with `SEEED_ARCH_MIX`
as an example of the selected board):
$ make BOARD=SEEED_ARCH_MIX submodules
Then to build the board's firmware run:
$ make BOARD=SEEED_ARCH_MIX
The above command should produce binary images in the `build-SEEED_ARCH_MIX/`
subdirectory (or the equivalent directory for the board specified).
## Flashing
Deploy the firmware following the instructions here
https://docs.micropython.org/en/latest/mimxrt/tutorial/intro.html#deploying-the-firmware