circuitpython/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.mk

USB_VID = 0x239A
USB_PID = 0x80F4
USB_PRODUCT = "Pico"
USB_MANUFACTURER = "Raspberry Pi"

CHIP_VARIANT = RP2040
CHIP_FAMILY = rp2

EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"

CIRCUITPY__EVE = 1
CIRCUITPY_PICODVI = 1
Add initial RP2040 support The RP2040 is new microcontroller from Raspberry Pi that features two Cortex M0s and eight PIO state machines that are good for crunching lots of data. It has 264k RAM and a built in UF2 bootloader too. Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf 2021-01-20 19:47:18 -05:00			`USB_VID = 0x239A`
			`USB_PID = 0x80F4`
			`USB_PRODUCT = "Pico"`
			`USB_MANUFACTURER = "Raspberry Pi"`

			`CHIP_VARIANT = RP2040`
			`CHIP_FAMILY = rp2`

Improve Winbond naming and correct board settings 2021-03-23 12:06:48 -04:00			`EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"`
Add Gameduino 3X Dazzler support on raspberry_pi_pico Tested with hardware. Looks good. Follow on from #4054 2021-01-29 15:25:59 -05:00
			`CIRCUITPY__EVE = 1`
Add PicoDVI support PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit color are half resolution. Memory layout is modified to give the top most 4k of ram to the second core. Its MPU is used to prevent flash access after startup. The port saved word is moved to a watchdog scratch register so that it doesn't get overwritten by other things in RAM. Right align status bar and scroll area. This normally gives a few pixels of padding on the left hand side and improves the odds it is readable in a case. Fixes #7562 Fixes c stack checking. The length was correct but the top was being set to the current stack pointer instead of the correct top. Fixes #7643 This makes Bitmap subscr raise IndexError instead of ValueError when the index arguments are wrong. 2023-04-07 14:59:55 -04:00			`CIRCUITPY_PICODVI = 1`