djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/ports/stm32/boards/stm32f411.ld

29 lines
1.0 KiB
Plaintext
Raw Normal View History

stmhal: Add support for STM32F411 MCU.
2015-04-18 17:15:59 -04:00
/*
GNU linker script for STM32F411
*/
/* Specify the memory areas */
MEMORY
{
stm32/boards: Change linker scripts to use "K" instead of hex byte size.
2017-09-06 01:24:08 -04:00
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K /* entire flash */
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */
FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 112K /* sectors 1,2,3 are 16K, 4 is 64K */
FLASH_TEXT (rx) : ORIGIN = 0x08020000, LENGTH = 384K /* sectors 5,6,7 are 128K */
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
stmhal: Add support for STM32F411 MCU.
2015-04-18 17:15:59 -04:00
}
all: Remove trailing spaces, per coding conventions.
2017-07-18 23:12:10 -04:00
stmhal: Add support for STM32F411 MCU.
2015-04-18 17:15:59 -04:00
/* produce a link error if there is not this amount of RAM for these sections */
_minimum_stack_size = 2K;
_minimum_heap_size = 16K;
all: Remove trailing spaces, per coding conventions.
2017-07-18 23:12:10 -04:00
stm32: In link script, define start of stack separately from heap end. Previously the end of the heap was the start (lowest address) of the stack. With the changes in this commit these addresses are now independent, allowing a board to place the heap and stack in separate locations.
2019-05-14 10:43:38 -04:00
/* Define the stack. The stack is full descending so begins just above last byte
of RAM. Note that EABI requires the stack to be 8-byte aligned for a call. */
stmhal: Fix stack pointer initialisation for F411 and F429 boards. The stack pointer should start pointing 1 byte past the top of the end of RAM.
2017-01-30 01:47:11 -05:00
_estack = ORIGIN(RAM) + LENGTH(RAM);
stm32: In link script, define start of stack separately from heap end. Previously the end of the heap was the start (lowest address) of the stack. With the changes in this commit these addresses are now independent, allowing a board to place the heap and stack in separate locations.
2019-05-14 10:43:38 -04:00
_sstack = _estack - 16K; /* tunable */
stmhal: Add support for STM32F411 MCU.
2015-04-18 17:15:59 -04:00
/* RAM extents for the garbage collector */
stmhal: Put common definitions from linker files to common.ld.
2016-09-21 05:49:45 -04:00
_ram_start = ORIGIN(RAM);
stmhal: Add support for STM32F411 MCU.
2015-04-18 17:15:59 -04:00
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
stmhal: Put common definitions from linker files to common.ld.
2016-09-21 05:49:45 -04:00
_heap_start = _ebss; /* heap starts just after statically allocated memory */
stm32: In link script, define start of stack separately from heap end. Previously the end of the heap was the start (lowest address) of the stack. With the changes in this commit these addresses are now independent, allowing a board to place the heap and stack in separate locations.
2019-05-14 10:43:38 -04:00
_heap_end = _sstack;