circuitpython/ports/atmel-samd/boards/metro_m4_express/mpconfigboard.h

51 lines
1.5 KiB
C
Raw Normal View History

#define MICROPY_HW_BOARD_NAME "Adafruit Metro M4 Express"
#define MICROPY_HW_MCU_NAME "samd51j19"
#define CIRCUITPY_MCU_FAMILY samd51
// This is for Rev F which is green
#define MICROPY_HW_LED_TX PIN_PA27
#define MICROPY_HW_LED_RX PIN_PB06
#define MICROPY_HW_NEOPIXEL (&pin_PB22)
// These are pins not to reset.
// QSPI Data pins and TX LED
#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 | PORT_PA27)
// RX LED, QSPI CS, QSPI SCK and NeoPixel pin
#define MICROPY_PORT_B ( PORT_PB06 | PORT_PB10 | PORT_PB11 | PORT_PB22)
#define MICROPY_PORT_C (0)
#define MICROPY_PORT_D (0)
#define AUTORESET_DELAY_MS 500
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
2018-02-28 22:15:54 -05:00
#include "external_flash/devices.h"
#define EXTERNAL_FLASH_DEVICE_COUNT 3
#define EXTERNAL_FLASH_DEVICES S25FL116K, S25FL216K, GD25Q16C
2018-02-28 22:15:54 -05:00
#include "external_flash/external_flash.h"
2018-05-16 15:36:36 -04:00
#define BOARD_HAS_CRYSTAL 1
2018-05-16 15:54:01 -04:00
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
2018-05-16 15:36:36 -04:00
#define DEFAULT_SPI_BUS_SCK (&pin_PA13)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
2018-05-17 13:48:33 -04:00
#define DEFAULT_UART_BUS_RX (&pin_PA23)
#define DEFAULT_UART_BUS_TX (&pin_PA22)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1