62 lines
1.9 KiB
ReStructuredText
62 lines
1.9 KiB
ReStructuredText
|
.. _renesas-ra_reset:
|
||
|
|
|
||
|
|
Reset and boot mode
|
||
|
|
===================
|
||
|
|
|
||
|
|
Resetting the board
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
If something goes wrong, you can reset the board in two ways. The first is
|
||
|
|
to press CTRL-D at the MicroPython prompt, which performs a soft reset.
|
||
|
|
You will see a message something like ::
|
||
|
|
|
||
|
|
MPY: sync filesystems
|
||
|
|
MPY: soft reboot
|
||
|
|
MicroPython v1.18-293-g339aa09b8-dirty on 2022-03-26; RA6M2_EK with RA6M2
|
||
|
|
Type "help()" for more information.
|
||
|
|
>>>
|
||
|
|
|
||
|
|
If that isn't working you can perform a hard reset (turn-it-off-and-on-again)
|
||
|
|
by pressing the RESET button. This will end your session, disconnecting
|
||
|
|
whatever program (PuTTY, screen, etc) that you used to connect to the board.
|
||
|
|
|
||
|
|
boot mode
|
||
|
|
---------
|
||
|
|
|
||
|
|
There are 3 boot modes:
|
||
|
|
|
||
|
|
* normal boot mode
|
||
|
|
* safe boot mode
|
||
|
|
* factory filesystem boot mode
|
||
|
|
|
||
|
|
boot.py and main.py are executed on "normal boot mode".
|
||
|
|
|
||
|
|
boot.py and main.py are *NOT* executed on "safe boot mode".
|
||
|
|
|
||
|
|
The file system of internal flash is initialized and *all files are erased* on "factory filesystem boot mode".
|
||
|
|
|
||
|
|
For changing boot mode, please push the RESET button with pressing USER SW1
|
||
|
|
on the board:
|
||
|
|
|
||
|
|
* For normal boot mode, release the USER SW1 after LED1 flashes 4 times or more
|
||
|
|
|
||
|
|
* For safe boot mode, release the USER SW1 after LED1 flashes 2 times
|
||
|
|
|
||
|
|
* For factory file system boot mode, release the USER SW1 after LED1 flashes 3 times.
|
||
|
|
|
||
|
|
You have created the main.py which executes LED1 blinking in the previous part.
|
||
|
|
If you change the boot mode to safe boot mode, the MicroPython starts without
|
||
|
|
the execution of main.py. Then you can remove the main.py by following
|
||
|
|
command or change the boot mode to factory file system boot mode.::
|
||
|
|
|
||
|
|
import os
|
||
|
|
os.remove('main.py')
|
||
|
|
|
||
|
|
or change the boot mode to factory file system boot mode.
|
||
|
|
|
||
|
|
You can confirm that the initialized file system that there are only boot.py and main.py files.::
|
||
|
|
|
||
|
|
import os
|
||
|
|
os.listdir()
|
||
|
|
|