circuitpython/stmhal/extint.c

#include <stdio.h>
#include <stddef.h>
#include <string.h>

#include <stm32f4xx_hal.h>

#include "nlr.h"
#include "misc.h"
#include "mpconfig.h"
#include "qstr.h"
#include "gc.h"
#include "obj.h"
#include "runtime.h"

#include "pin.h"
#include "extint.h"

// Usage Model:
//
// There are a total of 22 interrupt lines. 16 of these can come from GPIO pins
// and the remaining 6 are from internal sources.
//
// For lines 0 thru 15, a given line can map to the corresponding line from an
// arbitrary port. So line 0 can map to Px0 where x is A, B, C, ... and
// line 1 can map to Px1 where x is A, B, C, ...
//
// def callback(line):
//     print("line =", line)
//
// # Note: ExtInt will automatically configure the gpio line as an input.
// extint = pyb.ExtInt(pin, pyb.ExtInt.IRQ_FALLING, pyb.GPIO.PULL_UP, callback)
//
// Now every time a falling edge is seen on the X1 pin, the callback will be
// called. Caution: mechanical pushbuttons have "bounce" and pushing or
// releasing a switch will often generate multiple edges.
// See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed
// explanation, along with various techniques for debouncing.
//
// Trying to register 2 callbacks onto the same pin will throw an exception.
//
// If pin is passed as an integer, then it is assumed to map to one of the
// internal interrupt sources, and must be in the range 16 thru 22.
//
// All other pin objects go through the pin mapper to come up with one of the
// gpio pins.
//
// extint = pyb.ExtInt(pin, mode, pull, callback)
//
// Valid modes are pyb.ExtInt.IRQ_RISING, pyb.ExtInt.IRQ_FALLING,
// pyb.ExtInt.IRQ_RISING_FALLING, pyb.ExtInt.EVT_RISING,
// pyb.ExtInt.EVT_FALLING, and pyb.ExtInt.EVT_RISING_FALLING.
//
// Only the IRQ_xxx modes have been tested. The EVT_xxx modes have
// something to do with sleep mode and the WFE instruction.
//
// Valid pull values are pyb.GPIO.PULL_UP, pyb.GPIO.PULL_DOWN, pyb.GPIO.PULL_NONE.
//
// extint.line() will return the line number that pin was mapped to.
// extint.disable() can be use to disable the interrupt associated with a given
//                  exti object. This could be useful for debouncing.
// extint.enable()  enables a disabled interrupt
// extint.swint()   will allow the callback to be triggered from software.
//
// pyb.ExtInt.regs() will dump the values of the EXTI registers.
//
// There is also a C API, so that drivers which require EXTI interrupt lines
// can also use this code. See extint.h for the available functions and
// usrsw.h for an example of using this.
//
// TODO Add python method to change callback object.

#define EXTI_OFFSET	(EXTI_BASE - PERIPH_BASE)

// Macro used to set/clear the bit corresponding to the line in the IMR/EMR
// register in an atomic fashion by using bitband addressing.
#define EXTI_MODE_BB(mode, line) (*(__IO uint32_t *)(PERIPH_BB_BASE + ((EXTI_OFFSET + (mode)) * 32) + ((line) * 4)))

#define EXTI_Mode_Interrupt offsetof(EXTI_TypeDef, IMR)
#define EXTI_Mode_Event     offsetof(EXTI_TypeDef, EMR)

#define EXTI_SWIER_BB(line) (*(__IO uint32_t *)(PERIPH_BB_BASE + ((EXTI_OFFSET + offsetof(EXTI_TypeDef, SWIER)) * 32) + ((line) * 4)))

typedef struct {
    mp_obj_base_t  base;
    mp_small_int_t line;
} extint_obj_t;

typedef struct {
  mp_obj_t callback_obj;
  void *param;
  uint32_t mode;
} extint_vector_t;

STATIC extint_vector_t extint_vector[EXTI_NUM_VECTORS];

#if !defined(ETH)
#define ETH_WKUP_IRQn   62  // The 405 doesn't have ETH, but we want a value to put in our table
#endif

STATIC const uint8_t nvic_irq_channel[EXTI_NUM_VECTORS] = {
    EXTI0_IRQn,     EXTI1_IRQn,     EXTI2_IRQn,     EXTI3_IRQn,     EXTI4_IRQn,
    EXTI9_5_IRQn,   EXTI9_5_IRQn,   EXTI9_5_IRQn,   EXTI9_5_IRQn,   EXTI9_5_IRQn,
    EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn,
    EXTI15_10_IRQn, PVD_IRQn,       RTC_Alarm_IRQn, OTG_FS_WKUP_IRQn, ETH_WKUP_IRQn,
    OTG_HS_WKUP_IRQn, TAMP_STAMP_IRQn, RTC_WKUP_IRQn
};

// Set override_callback_obj to true if you want to unconditionally set the
// callback function.
//
// NOTE: param is for C callers. Python can use closure to get an object bound
//       with the function.
uint extint_register(mp_obj_t pin_obj, uint32_t mode, uint32_t pull, mp_obj_t callback_obj, bool override_callback_obj, void *param) {
    const pin_obj_t *pin = NULL;
    uint v_line;

    if (MP_OBJ_IS_INT(pin_obj)) {
        // If an integer is passed in, then use it to identify lines 16 thru 22
        // We expect lines 0 thru 15 to be passed in as a pin, so that we can
        // get both the port number and line number.
        v_line = mp_obj_get_int(pin_obj);
        if (v_line < 16) {
            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "ExtInt vector %d < 16, use a Pin object", v_line));
        }
        if (v_line >= EXTI_NUM_VECTORS) {
            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "ExtInt vector %d >= max of %d", v_line, EXTI_NUM_VECTORS));
        }
    } else {
        pin = pin_find(pin_obj);
        v_line = pin->pin;
    }
    if (mode != GPIO_MODE_IT_RISING &&
        mode != GPIO_MODE_IT_FALLING &&
        mode != GPIO_MODE_IT_RISING_FALLING &&
        mode != GPIO_MODE_EVT_RISING &&
        mode != GPIO_MODE_EVT_FALLING &&
        mode != GPIO_MODE_EVT_RISING_FALLING) {
        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "invalid ExtInt Mode: %d", mode));
    }
    if (pull != GPIO_NOPULL &&
        pull != GPIO_PULLUP &&
        pull != GPIO_PULLDOWN) {
        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "invalid ExtInt Pull: %d", pull));
    }

    extint_vector_t *v = &extint_vector[v_line];
    if (!override_callback_obj && v->callback_obj != mp_const_none && callback_obj != mp_const_none) {
        nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "ExtInt vector %d is already in use", v_line));
    }

    // We need to update callback and param atomically, so we disable the line
    // before we update anything.

    extint_disable(v_line);

    v->callback_obj = callback_obj;
    v->param = param;
    v->mode = (mode & 0x00010000) ? // GPIO_MODE_IT == 0x00010000
        EXTI_Mode_Interrupt : EXTI_Mode_Event;

    if (v->callback_obj != mp_const_none) {

        GPIO_InitTypeDef exti;
        exti.Pin = pin->pin_mask;
        exti.Mode = mode;
        exti.Pull = pull;
        exti.Speed = GPIO_SPEED_FAST;
        HAL_GPIO_Init(pin->gpio, &exti);

        // Calling HAL_GPIO_Init does an implicit extint_enable

        /* Enable and set NVIC Interrupt to the lowest priority */
        HAL_NVIC_SetPriority(nvic_irq_channel[v_line], 0x0F, 0x0F);
        HAL_NVIC_EnableIRQ(nvic_irq_channel[v_line]);
    }
    return v_line;
}

void extint_enable(uint line) {
    if (line >= EXTI_NUM_VECTORS) {
        return;
    }
    // Since manipulating IMR/EMR is a read-modify-write, and we want this to
    // be atomic, we use the bit-band area to just affect the bit we're
    // interested in.
    EXTI_MODE_BB(extint_vector[line].mode, line) = 1;
}

void extint_disable(uint line) {
    if (line >= EXTI_NUM_VECTORS) {
        return;
    }
    // Since manipulating IMR/EMR is a read-modify-write, and we want this to
    // be atomic, we use the bit-band area to just affect the bit we're
    // interested in.
    EXTI_MODE_BB(EXTI_Mode_Interrupt, line) = 0;
    EXTI_MODE_BB(EXTI_Mode_Event, line) = 0;
}

void extint_swint(uint line) {
    if (line >= EXTI_NUM_VECTORS) {
        return;
    }
    EXTI->SWIER = (1 << line);
}

STATIC mp_obj_t extint_obj_line(mp_obj_t self_in) {
    extint_obj_t *self = self_in;
    return MP_OBJ_NEW_SMALL_INT(self->line);
}

STATIC mp_obj_t extint_obj_enable(mp_obj_t self_in) {
    extint_obj_t *self = self_in;
    extint_enable(self->line);
    return mp_const_none;
}

STATIC mp_obj_t extint_obj_disable(mp_obj_t self_in) {
    extint_obj_t *self = self_in;
    extint_disable(self->line);
    return mp_const_none;
}

STATIC mp_obj_t extint_obj_swint(mp_obj_t self_in) {
    extint_obj_t *self = self_in;
    extint_swint(self->line);
    return mp_const_none;
}

STATIC mp_obj_t extint_regs(void) {
    printf("EXTI_IMR   %08lx\n", EXTI->IMR);
    printf("EXTI_EMR   %08lx\n", EXTI->EMR);
    printf("EXTI_RTSR  %08lx\n", EXTI->RTSR);
    printf("EXTI_FTSR  %08lx\n", EXTI->FTSR);
    printf("EXTI_SWIER %08lx\n", EXTI->SWIER);
    printf("EXTI_PR    %08lx\n", EXTI->PR);
    return mp_const_none;
}

// line_obj = pyb.ExtInt(pin, mode, pull, callback)

STATIC const mp_arg_t pyb_extint_make_new_args[] = {
    { MP_QSTR_pin,      MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
    { MP_QSTR_mode,     MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
    { MP_QSTR_pull,     MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
    { MP_QSTR_callback, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
};
#define PYB_EXTINT_MAKE_NEW_NUM_ARGS ARRAY_SIZE(pyb_extint_make_new_args)

STATIC mp_obj_t extint_make_new(mp_obj_t type_in, uint n_args, uint n_kw, const mp_obj_t *args) {
    // type_in == extint_obj_type

    // parse args
    mp_map_t kw_args;
    mp_map_init_fixed_table(&kw_args, n_kw, args + n_args);
    mp_arg_val_t vals[PYB_EXTINT_MAKE_NEW_NUM_ARGS];
    mp_arg_parse_all(n_args, args, &kw_args, PYB_EXTINT_MAKE_NEW_NUM_ARGS, pyb_extint_make_new_args, vals);

    extint_obj_t *self = m_new_obj(extint_obj_t);
    self->base.type = type_in;
    self->line = extint_register(vals[0].u_obj, vals[1].u_int, vals[2].u_int, vals[3].u_obj, false, NULL);

    return self;
}

STATIC void extint_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
    extint_obj_t *self = self_in;
    print(env, "<ExtInt line=%u>", self->line);
}

STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_line_obj,    extint_obj_line);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_enable_obj,  extint_obj_enable);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_disable_obj, extint_obj_disable);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_swint_obj,   extint_obj_swint);
STATIC MP_DEFINE_CONST_FUN_OBJ_0(extint_regs_fun_obj,    extint_regs);
STATIC MP_DEFINE_CONST_STATICMETHOD_OBJ(extint_regs_obj, (mp_obj_t)&extint_regs_fun_obj);

STATIC const mp_map_elem_t extint_locals_dict_table[] = {
    { MP_OBJ_NEW_QSTR(MP_QSTR_line),    (mp_obj_t)&extint_obj_line_obj },
    { MP_OBJ_NEW_QSTR(MP_QSTR_enable),  (mp_obj_t)&extint_obj_enable_obj },
    { MP_OBJ_NEW_QSTR(MP_QSTR_disable), (mp_obj_t)&extint_obj_disable_obj },
    { MP_OBJ_NEW_QSTR(MP_QSTR_swint),   (mp_obj_t)&extint_obj_swint_obj },
    { MP_OBJ_NEW_QSTR(MP_QSTR_regs),    (mp_obj_t)&extint_regs_obj },
    { MP_OBJ_NEW_QSTR(MP_QSTR_IRQ_RISING),         MP_OBJ_NEW_SMALL_INT(GPIO_MODE_IT_RISING) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_IRQ_FALLING),        MP_OBJ_NEW_SMALL_INT(GPIO_MODE_IT_FALLING) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_IRQ_RISING_FALLING), MP_OBJ_NEW_SMALL_INT(GPIO_MODE_IT_RISING_FALLING) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_EVT_RISING),         MP_OBJ_NEW_SMALL_INT(GPIO_MODE_EVT_RISING) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_EVT_FALLING),        MP_OBJ_NEW_SMALL_INT(GPIO_MODE_EVT_FALLING) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_EVT_RISING_FALLING), MP_OBJ_NEW_SMALL_INT(GPIO_MODE_EVT_RISING_FALLING) },
};

STATIC MP_DEFINE_CONST_DICT(extint_locals_dict, extint_locals_dict_table);

const mp_obj_type_t extint_type = {
    { &mp_type_type },
    .name = MP_QSTR_ExtInt,
    .print = extint_obj_print,
    .make_new = extint_make_new,
    .locals_dict = (mp_obj_t)&extint_locals_dict,
};

void extint_init(void) {
    for (extint_vector_t *v = extint_vector; v < &extint_vector[EXTI_NUM_VECTORS]; v++) {
        v->callback_obj = mp_const_none;
        v->param = NULL;
        v->mode = EXTI_Mode_Interrupt;
    }
}

// Interrupt handler
void Handle_EXTI_Irq(uint32_t line) {
    if (__HAL_GPIO_EXTI_GET_FLAG(1 << line)) {
        __HAL_GPIO_EXTI_CLEAR_FLAG(1 << line);
        if (line < EXTI_NUM_VECTORS) {
            extint_vector_t *v = &extint_vector[line];
            if (v->callback_obj != mp_const_none) {
                // When executing code within a handler we must lock the GC to prevent
                // any memory allocations.  We must also catch any exceptions.
                gc_lock();
                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    mp_call_function_1(v->callback_obj, MP_OBJ_NEW_SMALL_INT(line));
                    nlr_pop();
                } else {
                    // Uncaught exception; disable the callback so it doesn't run again.
                    v->callback_obj = mp_const_none;
                    extint_disable(line);
                    printf("Uncaught exception in ExtInt interrupt handler line %lu\n", line);
                    mp_obj_print_exception((mp_obj_t)nlr.ret_val);
                }
                gc_unlock();
            }
        }
    }
}