circuitpython/ports/atmel-samd/boards/metro_m4_express/mpconfigboard.h

#define MICROPY_HW_BOARD_NAME "Metro M4 Express"
#define MICROPY_HW_MCU_NAME "samd51j19"

#define CIRCUITPY_MCU_FAMILY samd51

// This is for Rev F which is green

#define MICROPY_HW_LED_TX   PIN_PA27
#define MICROPY_HW_LED_RX   PIN_PB06

#define MICROPY_HW_NEOPIXEL (&pin_PB22)

// These are pins not to reset.
// QSPI Data pins and TX LED
#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 | PORT_PA27)
// RX LED, QSPI CS, QSPI SCK and NeoPixel pin
#define MICROPY_PORT_B ( PORT_PB06 | PORT_PB10 | PORT_PB11 | PORT_PB22)
#define MICROPY_PORT_C (0)
#define MICROPY_PORT_D (0)

#define AUTORESET_DELAY_MS 500

// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code
// #define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define CIRCUITPY_INTERNAL_NVM_SIZE 0

#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

#include "external_flash/devices.h"

#define EXTERNAL_FLASH_DEVICE_COUNT 3
#define EXTERNAL_FLASH_DEVICES S25FL116K, S25FL216K, GD25Q16C

#include "external_flash/external_flash.h"
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00			`#define MICROPY_HW_BOARD_NAME "Metro M4 Express"`
atmel-samd: Switch Metro M4 Express to SAMD51J19. (#351) 2017-10-19 22:39:16 -04:00			`#define MICROPY_HW_MCU_NAME "samd51j19"`
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00
			`#define CIRCUITPY_MCU_FAMILY samd51`

Update Metro M4 to rev F and make flash reset on start. 2018-03-22 19:42:47 -04:00			`// This is for Rev F which is green`
Add a new board for Metro M4 Express Rev B. This is the board send to community members for testing. Also tweaked and commented reset pin list for main Metro M4 Express which is currently unreleased and is Rev D. 2018-02-20 15:34:07 -05:00
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00			`#define MICROPY_HW_LED_TX PIN_PA27`
			`#define MICROPY_HW_LED_RX PIN_PB06`

Update Metro M4 to rev F and make flash reset on start. 2018-03-22 19:42:47 -04:00			`#define MICROPY_HW_NEOPIXEL (&pin_PB22)`
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-22 23:07:21 -05:00			`// These are pins not to reset.`
Add a new board for Metro M4 Express Rev B. This is the board send to community members for testing. Also tweaked and commented reset pin list for main Metro M4 Express which is currently unreleased and is Rev D. 2018-02-20 15:34:07 -05:00			`// QSPI Data pins and TX LED`
			`#define MICROPY_PORT_A (PORT_PA08 \| PORT_PA09 \| PORT_PA10 \| PORT_PA11 \| PORT_PA27)`
			`// RX LED, QSPI CS, QSPI SCK and NeoPixel pin`
Update Metro M4 to rev F and make flash reset on start. 2018-03-22 19:42:47 -04:00			`#define MICROPY_PORT_B ( PORT_PB06 \| PORT_PB10 \| PORT_PB11 \| PORT_PB22)`
Add a new board for Metro M4 Express Rev B. This is the board send to community members for testing. Also tweaked and commented reset pin list for main Metro M4 Express which is currently unreleased and is Rev D. 2018-02-20 15:34:07 -05:00			`#define MICROPY_PORT_C (0)`
			`#define MICROPY_PORT_D (0)`
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00
			`#define AUTORESET_DELAY_MS 500`

			`// If you change this, then make sure to update the linker scripts as well to`
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-22 23:07:21 -05:00			`// make sure you don't overwrite code`
			`// #define CIRCUITPY_INTERNAL_NVM_SIZE 256`
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 21:05:51 -04:00			`#define CIRCUITPY_INTERNAL_NVM_SIZE 0`

Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-22 23:07:21 -05:00			`#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)`

Structify flash device definitions. 2018-02-28 22:15:54 -05:00			`#include "external_flash/devices.h"`

Support all boards and remove erase and page sizes because they never change. 2018-03-01 15:45:12 -05:00			`#define EXTERNAL_FLASH_DEVICE_COUNT 3`
			`#define EXTERNAL_FLASH_DEVICES S25FL116K, S25FL216K, GD25Q16C`
Structify flash device definitions. 2018-02-28 22:15:54 -05:00
			`#include "external_flash/external_flash.h"`