djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0d57fc4d8c
circuitpython/locale/circuitpython.pot

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

4375 lines
97 KiB
Plaintext
Raw Normal View History

Update translations
2020-07-17 21:00:58 -04:00
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
Support internationalisation.
2018-07-31 19:53:54 -04:00
#
Update translations
2020-07-17 21:00:58 -04:00
#, fuzzy
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: main.c
msgid ""
"\n"
Make translate
2020-12-23 18:00:53 -05:00
"Code done running.\n"
msgstr ""
#: main.c
msgid ""
"\n"
Further refine autoreload This unifies the delay into the post-run delay that also waits for user input and fake sleep. This ensures we always delay. Previous code would only delay if the code.py was running when autoreload was triggered. Now it will always delay. We also now suspend autoreload when a USB write starts and then resume on completion. This should prevent reloading in between sectors of a single write.
2022-03-14 19:49:30 -04:00
"Code stopped by auto-reload. Reloading soon.\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Updated to requested changes
2023-02-16 16:10:11 -05:00
#: supervisor/shared/safe_mode.c
Removed old supervisor stack setting code and revert some 'optimisations'
2023-02-16 06:33:37 -05:00
msgid ""
"\n"
consolidate and shorten some error messages
2023-08-19 12:14:58 -04:00
"Please file an issue with your program at github.com/adafruit/circuitpython/"
"issues."
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
"Press reset to exit safe mode.\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"You are in safe mode because:\n"
Removed old supervisor stack setting code and revert some 'optimisations'
2023-02-16 06:33:37 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
msgid " File \"%q\""
msgstr ""
#: py/obj.c
msgid " File \"%q\", line %d"
msgstr ""
Add localization for built-in help Support localizing the output of a call to to match the firmware's language.
2020-12-30 18:47:35 -05:00
#: py/builtinhelp.c
msgid " is of type %q\n"
msgstr ""
Add supervisor.set_next_code() function (prototype). Part of #1084.
2020-10-29 11:39:06 -04:00
#: main.c
msgid " not found.\n"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: main.c
msgid " output:\n"
msgstr ""
#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr ""
save about 112 bytes
2022-10-09 19:22:39 -04:00
#: main.c
#, c-format
msgid "%02X"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
#, c-format
make translate
2021-01-26 12:04:18 -05:00
msgid ""
"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
make translate
2020-04-14 19:25:21 -04:00
msgstr ""
Made check function generic
2021-08-17 18:55:26 -04:00
#: shared-bindings/microcontroller/Pin.c
Made error message clear and reduce calls
2021-08-19 21:03:49 -04:00
msgid "%q and %q contain duplicate pins"
Made check function generic
2021-08-17 18:55:26 -04:00
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "%q and %q must be different"
msgstr ""
Made check function generic
2021-08-17 18:55:26 -04:00
#: shared-bindings/microcontroller/Pin.c
msgid "%q contains duplicate pins"
msgstr ""
atmel-samd: Add SDIO SD card interface
2020-06-26 11:58:54 -04:00
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr ""
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
#: py/argcheck.c
msgid "%q in %q must be of type %q, not %q"
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: ports/espressif/common-hal/espulp/ULP.c
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
#: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
Unify some error strings
2023-07-20 14:16:31 -04:00
#: ports/mimxrt10xx/common-hal/usb_host/Port.c
Add PicoDVI support PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit color are half resolution. Memory layout is modified to give the top most 4k of ram to the second core. Its MPU is used to prevent flash access after startup. The port saved word is moved to a watchdog scratch register so that it doesn't get overwritten by other things in RAM. Right align status bar and scroll area. This normally gives a few pixels of padding on the left hand side and improves the odds it is readable in a case. Fixes #7562 Fixes c stack checking. The length was correct but the top was being set to the current stack pointer instead of the correct top. Fixes #7643 This makes Bitmap subscr raise IndexError instead of ValueError when the index arguments are wrong.
2023-04-07 14:59:55 -04:00
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
add coproc alarm
2022-10-20 05:26:10 -04:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
Unify some error strings
2023-07-20 14:16:31 -04:00
#: ports/raspberrypi/common-hal/usb_host/Port.c
cyw43 basic gpio support, hwaddr in boot_out
2022-08-25 15:01:14 -04:00
#: shared-bindings/digitalio/DigitalInOut.c
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-bindings/microcontroller/Pin.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "%q in use"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objstr.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "%q index out of range"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: shared-module/bitbangio/SPI.c
msgid "%q init failed"
msgstr ""
rework espnow api
2023-02-02 11:04:24 -05:00
#: ports/espressif/bindings/espnow/Peer.c shared-bindings/dualbank/__init__.c
add storage extension python api
2022-10-05 23:50:54 -04:00
msgid "%q is %q"
msgstr ""
clarify read-only mac address; reuse translate msgs
2022-12-19 10:44:06 -05:00
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "%q is read-only for this board"
msgstr ""
Use a function to raise ZeroDivisionError, consistent string
2022-11-08 16:24:49 -05:00
#: py/argcheck.c shared-bindings/usb_hid/Device.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "%q length must be %d"
msgstr ""
add generic arg validation routines; add interval args to keypad
2021-06-21 12:13:39 -04:00
#: py/argcheck.c
restrict WaveFile buffer size to 8-1024
2021-08-26 09:34:02 -04:00
msgid "%q length must be %d-%d"
add .num_keys and .store_states() to Keys and KeyMatrix
2021-06-17 12:02:54 -04:00
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: py/argcheck.c
msgid "%q length must be <= %d"
msgstr ""
update translations again
2022-11-08 18:48:04 -05:00
#: py/argcheck.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "%q length must be >= %d"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: py/objmodule.c py/runtime.c
msgid "%q moved from %q to %q"
msgstr ""
update ulab to 6.0.12 w/sinc function
2023-05-17 09:57:06 -04:00
#: py/argcheck.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "%q must be %d"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: py/argcheck.c shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/displayio/Bitmap.c
update ulab to 6.0.12 w/sinc function
2023-05-17 09:57:06 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/is31fl3741/FrameBuffer.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
Implement gifio.GifWriter This involves: * Adding a new "L8" colorspace for colorconverters * factoring out displayio_colorconverter_convert_pixel * Making a minimal "colorspace only" version of displayio for the unix port (testing purposes) * fixing an error message I only tested writing B&W animated images, with the following script: ```python import displayio import gifio with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g: for i in range(0, 256, 14): data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32 print("add_frame") g.add_frame(data) # expected to raise an error, buffer is not big enough with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g: g.add_frame(bytes([3,3,3])) ```
2021-10-21 12:45:11 -04:00
msgid "%q must be %d-%d"
add generic arg validation routines; add interval args to keypad
2021-06-21 12:13:39 -04:00
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/busdisplay/BusDisplay.c
add error msg for SH1107 fix
2022-05-13 12:54:46 -04:00
msgid "%q must be 1 when %q is True"
msgstr ""
Implement gifio.GifWriter This involves: * Adding a new "L8" colorspace for colorconverters * factoring out displayio_colorconverter_convert_pixel * Making a minimal "colorspace only" version of displayio for the unix port (testing purposes) * fixing an error message I only tested writing B&W animated images, with the following script: ```python import displayio import gifio with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g: for i in range(0, 256, 14): data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32 print("add_frame") g.add_frame(data) # expected to raise an error, buffer is not big enough with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g: g.add_frame(bytes([3,3,3])) ```
2021-10-21 12:45:11 -04:00
#: py/argcheck.c shared-bindings/gifio/GifWriter.c
Unify some error strings
2023-07-20 14:16:31 -04:00
#: shared-module/gifio/OnDiskGif.c
Implement gifio.GifWriter This involves: * Adding a new "L8" colorspace for colorconverters * factoring out displayio_colorconverter_convert_pixel * Making a minimal "colorspace only" version of displayio for the unix port (testing purposes) * fixing an error message I only tested writing B&W animated images, with the following script: ```python import displayio import gifio with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g: for i in range(0, 256, 14): data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32 print("add_frame") g.add_frame(data) # expected to raise an error, buffer is not big enough with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g: g.add_frame(bytes([3,3,3])) ```
2021-10-21 12:45:11 -04:00
msgid "%q must be <= %d"
add generic arg validation routines; add interval args to keypad
2021-06-21 12:13:39 -04:00
msgstr ""
silently return when watchdog isn't active
2023-03-16 01:54:43 -04:00
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "%q must be <= %u"
wip
2021-06-14 16:00:15 -04:00
msgstr ""
add generic arg validation routines; add interval args to keypad
2021-06-21 12:13:39 -04:00
#: py/argcheck.c
msgid "%q must be >= %d"
wip
2021-06-14 16:00:15 -04:00
msgstr ""
touch up analogbufio ValueError msg; consolidate with another message
2022-09-16 09:34:25 -04:00
#: shared-bindings/analogbufio/BufferedIn.c
Rework the analogbufio API. * read() is now readinto() and takes the buffer to write into. * readinto() returns the number of valid samples. * readinto() can be interrupted by ctrl-c. * readinto() API doesn't support signed numbers because it never did. * sample_rate is now required in the constructor because supported values will vary per-port. * 16 bit values are full range. 12 bit samples from RP2040 are stretched in the same way they are for AnalogIn. Fixes #7226
2022-12-01 20:39:49 -05:00
msgid "%q must be a bytearray or array of type 'H' or 'B'"
msgstr ""
touch up analogbufio ValueError msg; consolidate with another message
2022-09-16 09:34:25 -04:00
#: shared-bindings/audiocore/RawSample.c
msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/warnings/__init__.c
msgid "%q must be a subclass of %q"
msgstr ""
fix typos (partial) detected by codepell
2023-03-18 11:17:02 -04:00
#: ports/espressif/common-hal/analogbufio/BufferedIn.c
msgid "%q must be array of type 'H'"
msgstr ""
change hex radio password validation; add password length doc
2023-04-20 09:47:25 -04:00
#: shared-module/synthio/__init__.c
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
msgid "%q must be array of type 'h'"
msgstr ""
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
#: ports/raspberrypi/bindings/cyw43/__init__.c py/argcheck.c py/objexcept.c
#: shared-bindings/canio/CAN.c shared-bindings/digitalio/Pull.c
Shrink by combining error messages
2023-05-18 19:24:37 -04:00
#: shared-module/synthio/Synthesizer.c
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
msgid "%q must be of type %q or %q, not %q"
Fix crash when UART construct fails After the script stops with the exception thrown the final gc_sweep will call any finalizers and they usually call deinit. deinit on invalid objects can wreak havoc by changing random memory or (hopefully) crashing. This fixes ensures the object is deinited until initialization succeeds and the object is valid. Do the same fix for I2C and SPI too. Fixes #4700 and fixes #5005
2021-07-20 20:08:22 -04:00
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/argcheck.c shared-module/synthio/__init__.c
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
msgid "%q must be of type %q, not %q"
countio: add selectable rise and fall detection, pulls
2021-12-30 21:49:52 -05:00
msgstr ""
use `mp_arg_validate_type` for keyword args
2021-10-10 02:46:14 -04:00
#: ports/atmel-samd/common-hal/busio/UART.c
msgid "%q must be power of 2"
add generic arg validation routines; add interval args to keypad
2021-06-21 12:13:39 -04:00
msgstr ""
add monitor class Co-authored-by: anecdata <16617689+anecdata@users.noreply.github.com>
2021-11-02 01:30:11 -04:00
#: shared-bindings/wifi/Monitor.c
msgid "%q out of bounds"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
#: shared-bindings/canio/Match.c
make translate
2020-09-21 17:45:51 -04:00
msgid "%q out of range"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: py/objmodule.c py/runtime.c
msgid "%q renamed %q"
msgstr ""
Merge some messages
2022-11-08 16:36:23 -05:00
#: py/objrange.c py/objslice.c shared-bindings/random/__init__.c
msgid "%q step cannot be zero"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr ""
wip
2021-07-28 10:31:47 -04:00
#: shared-bindings/usb_hid/Device.c
msgid "%q, %q, and %q must all be the same length"
msgstr ""
add storage extension python api
2022-10-05 23:50:54 -04:00
#: py/objint.c shared-bindings/storage/__init__.c
Added non-keyword args to allowed_args
2022-07-06 10:22:45 -04:00
msgid "%q=%q"
msgstr ""
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] shifts in more bits than pin count"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] shifts out more bits than pin count"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] uses extra pin"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] waits on input outside of count"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
#, c-format
msgid "%s error 0x%x"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/argcheck.c
msgid "'%q' argument required"
msgstr ""
make translate
2020-08-04 14:58:43 -04:00
#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr ""
#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr ""
add atexit module
2021-07-29 23:06:24 -04:00
#: py/objtype.c py/runtime.c shared-module/atexit/__init__.c
make translate
2020-08-04 14:58:43 -04:00
msgid "'%q' object is not callable"
msgstr ""
#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr ""
#: py/emitinlinextensa.c
#, c-format
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "'%s' integer %d isn't within range %d..%d"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/emitinlinethumb.c
#, c-format
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "'%s' integer 0x%x doesn't fit in mask 0x%x"
msgstr ""
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item assignment"
msgstr ""
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item deletion"
msgstr ""
clarify read-only mac address; reuse translate msgs
2022-12-19 10:44:06 -05:00
#: py/runtime.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "'%s' object has no attribute '%q'"
msgstr ""
#: py/obj.c
#, c-format
msgid "'%s' object isn't subscriptable"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-module/struct/__init__.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "'S' and 'O' are not supported format types"
More strings
2018-08-09 17:15:18 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "'align' requires 1 argument"
msgstr ""
make translate
2020-03-02 10:13:06 -05:00
#: py/compile.c
translations
2020-07-24 22:58:20 -04:00
msgid "'await' outside function"
make translate
2020-03-02 10:13:06 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
Fix tests and update translations
2023-10-20 19:56:30 -04:00
msgid "'break'/'continue' outside loop"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr ""
#: py/compile.c
msgid "'data' requires integer arguments"
msgstr ""
#: py/compile.c
msgid "'label' requires 1 argument"
msgstr ""
#: py/compile.c
msgid "'return' outside function"
msgstr ""
Fix async tests by adding back __await__ use. Remove u* lookup
2023-10-23 19:13:11 -04:00
#: py/compile.c
msgid "'yield from' inside async function"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "'yield' outside function"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/compile.c
msgid "* arg after **"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "*x must be assignment target"
msgstr ""
#: py/obj.c
msgid ", in %q\n"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/epaperdisplay/EPaperDisplay.c
Add friendlier error when .show() used Fixes #8499
2023-10-24 18:39:49 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid ".show(x) removed. Use .root_group = x"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr ""
#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr ""
ParallelImageCapture: Add continuous capture on espressif By having a pair of buffers, the capture hardware can fill one buffer while Python code (including displayio, etc) operates on the other buffer. This increases the responsiveness of camera-using code. On the Kaluga it makes the following improvements: * 320x240 viewfinder at 30fps instead of 15fps using directio * 240x240 animated gif capture at 10fps instead of 7.5fps As discussed at length on Discord, the "usual end user" code will look like this: camera = ... with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: # Do something with frame However, rather than presenting a context manager, the core code consists of three new functions to start & stop continuous capture, and to get the next frame. The reason is twofold. First, it's simply easier to implement the context manager object in pure Python. Second, for more advanced usage, the context manager may be too limiting, and it's easier to iterate on the right design in Python code. In particular, I noticed that adapting the JPEG-capturing programs to use continuous capture mode needed a change in program structure. The camera app was structured as ```python while True: if shutter button was just pressed: capture a jpeg frame else: update the viewfinder ``` However, "capture a jpeg frame" needs to (A) switch the camera settings and (B) capture into a different, larger buffer then (C) return to the earlier settings. This can't be done during continuous capture mode. So just restructuring it as follows isn't going to work: ```python with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: if shutter button was just pressed: capture a jpeg frame, without disturbing continuous capture mode else: update the viewfinder ``` The continuous mode is only implemented in the espressif port; others will throw an exception if the associated methods are invoked. It's not impossible to implement there, just not a priority, since these micros don't have enough RAM for two framebuffer copies at any resonable sizes. The capture code, including single-shot capture, now take mp_obj_t in the common-hal layer, instead of a buffer & length. This was done for the continuous capture mode because it has to identify & return to the user the proper Python object representing the original buffer. In the Espressif port, it was convenient to implement single capture in terms of a multi-capture, which is why I changed the singleshot routine's signature too.
2021-10-27 17:10:20 -04:00
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
refactor countio based on feedback
2020-05-05 01:23:38 -04:00
#: ports/atmel-samd/common-hal/countio/Counter.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr ""
Picow-ap wifi improvements
2023-08-23 13:04:51 -04:00
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "AP could not be started"
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
Remove file locations
2019-02-22 15:04:54 -05:00
#, c-format
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
msgid "Address must be %d bytes long"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: ports/espressif/common-hal/memorymap/AddressRange.c
update ulab to 6.0.12 w/sinc function
2023-05-17 09:57:06 -04:00
#: ports/nrf/common-hal/memorymap/AddressRange.c
8334: RP2040 lacks raw memory map access
2023-08-31 23:25:20 -04:00
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
msgid "Address range not allowed"
msgstr ""
8334: RP2040 lacks raw memory map access
2023-08-31 23:25:20 -04:00
#: shared-bindings/memorymap/AddressRange.c
msgid "Address range wraps around"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/CAN.c
make translate
2020-10-21 12:30:33 -04:00
msgid "All CAN peripherals are in use"
msgstr ""
error at runtime if no psram actually reserved
2022-08-23 12:34:22 -04:00
#: ports/espressif/common-hal/busio/I2C.c
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:06:18 -04:00
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
error at runtime if no psram actually reserved
2022-08-23 12:34:22 -04:00
#: ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:06:18 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/countio/Counter.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
move pcnt handler
2020-11-04 10:50:24 -05:00
msgid "All PCNT units in use"
msgstr ""
make translate
2020-09-21 17:45:51 -04:00
#: ports/atmel-samd/common-hal/canio/Listener.c
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/Listener.c
displayio: Add make_transparent to ColorConverter
2020-10-11 18:29:16 -04:00
#: ports/stm/common-hal/canio/Listener.c
make translate
2020-09-21 17:45:51 -04:00
msgid "All RX FIFOs in use"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "All SPI peripherals are in use"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "All UART peripherals are in use"
msgstr ""
revert localization of repl messages
2021-09-06 06:58:00 -04:00
#: ports/nrf/common-hal/countio/Counter.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
make translate; fix display pins
2021-03-18 23:42:24 -04:00
#: shared-bindings/pwmio/PWMOut.c
msgid "All channels in use"
msgstr ""
Basic USB host support and keyboard workflow Connects up read, write and ctrl_transfer to TinyUSB. USB Host support is available on iMX RT and RP2040. Fixes #6527 (imx) and fixes #5986 (rp2).
2023-05-02 15:13:54 -04:00
#: ports/raspberrypi/common-hal/usb_host/Port.c
msgid "All dma channels in use"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr ""
Add PicoDVI support PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit color are half resolution. Memory layout is modified to give the top most 4k of ram to the second core. Its MPU is used to prevent flash access after startup. The port saved word is moved to a watchdog scratch register so that it doesn't get overwritten by other things in RAM. Right align status bar and scroll area. This normally gives a few pixels of padding on the left hand side and improves the odds it is readable in a case. Fixes #7562 Fixes c stack checking. The length was correct but the top was being set to the current stack pointer instead of the correct top. Fixes #7643 This makes Bitmap subscr raise IndexError instead of ValueError when the index arguments are wrong.
2023-04-07 14:59:55 -04:00
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
Basic USB host support and keyboard workflow Connects up read, write and ctrl_transfer to TinyUSB. USB Host support is available on iMX RT and RP2040. Fixes #6527 (imx) and fixes #5986 (rp2).
2023-05-02 15:13:54 -04:00
#: ports/raspberrypi/common-hal/usb_host/Port.c
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgid "All state machines in use"
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: ports/atmel-samd/audio_dma.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "All sync event channels in use"
msgstr ""
Add PicoDVI support PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit color are half resolution. Memory layout is modified to give the top most 4k of ram to the second core. Its MPU is used to prevent flash access after startup. The port saved word is moved to a watchdog scratch register so that it doesn't get overwritten by other things in RAM. Right align status bar and scroll area. This normally gives a few pixels of padding on the left hand side and improves the odds it is readable in a case. Fixes #7562 Fixes c stack checking. The length was correct but the top was being set to the current stack pointer instead of the correct top. Fixes #7643 This makes Bitmap subscr raise IndexError instead of ValueError when the index arguments are wrong.
2023-04-07 14:59:55 -04:00
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/pwmio/PWMOut.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "All timers for this pin are in use"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate and msgmerge
2020-06-23 15:15:45 -04:00
#: ports/atmel-samd/common-hal/_pew/PewPew.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
Update translations
2020-04-09 16:16:32 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/cxd56/common-hal/pulseio/PulseOut.c
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/neopixel_write/__init__.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: ports/espressif/common-hal/pulseio/PulseOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 20:14:44 -04:00
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
Update translations
2020-08-25 19:40:45 -04:00
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "All timers in use"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
Update translations
2019-10-21 22:50:17 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr ""
make translate
2020-09-21 17:45:51 -04:00
#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr ""
split espnow between bindings and common-hal
2023-02-01 07:24:51 -05:00
#: ports/espressif/bindings/espnow/ESPNow.c
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: ports/espressif/common-hal/espulp/ULP.c
Update translations
2020-07-17 21:00:58 -04:00
#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/wifi/Radio.c
Implement scan, connect, ping My pings go out, and then they come back ```py import os import wifi import ipaddress wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD')) ipv4 = ipaddress.ip_address("8.8.4.4") print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000)) ```
2022-08-31 11:13:39 -04:00
#: ports/raspberrypi/common-hal/wifi/Radio.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Already scanning for wifi networks"
msgstr ""
Print errors to repl about getenv
2022-12-26 11:45:42 -05:00
#: shared-module/os/getenv.c
#, c-format
msgid "An error occurred while retrieving '%s':\n"
msgstr ""
[stm] implementation of audiopwmio Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect Tested on a Meowbit
2021-03-06 02:20:16 -05:00
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Another PWMAudioOut is already active"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/cxd56/common-hal/pulseio/PulseOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Another send is already active"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-bindings/pulseio/PulseOut.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Array must contain halfwords (type 'H')"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
add coproc module
2022-10-19 11:05:48 -04:00
#: shared-bindings/nvm/ByteArray.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Array values should be single bytes."
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Update translations
2020-07-17 21:00:58 -04:00
#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr ""
wip, with debugging printf's
2021-07-29 13:26:10 -04:00
#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr ""
make authmode settable
2021-04-30 07:54:36 -04:00
#: shared-bindings/wifi/Radio.c
msgid "AuthMode.OPEN is not used with password"
msgstr ""
Safe mode when ESP interrupt watchdog fires This makes us enter safe mode when sleep on the S3 fails. The task watchdog is used for the user watchdog.
2022-06-29 15:31:18 -04:00
#: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c
Update translations
2020-08-25 19:40:45 -04:00
msgid "Authentication failure"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: main.c
msgid "Auto-reload is off.\n"
msgstr ""
#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/CAN.c
make translate
2020-10-21 12:30:33 -04:00
msgid "Baudrate not supported by peripheral"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-module/busdisplay/BusDisplay.c
make translate
2020-04-14 19:25:21 -04:00
#: shared-module/framebufferio/FramebufferDisplay.c
Update translations
2019-08-22 15:59:17 -04:00
msgid "Below minimum frame rate"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
Refine error message for rp2040 audiobusio I2S object creation The error message for creating an I2S object on the rp2040 platform in CircuitPython can be misleading when the word_select and data pins are not sequential. This change updates the error message to provide clearer guidance by specifying "GPIO pins" instead of just "pins". The revised message now reads: ValueError: Bit clock and word select must be sequential GPIO pins Closes #8058 Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
2023-10-08 11:24:55 -04:00
msgid "Bit clock and word select must be sequential GPIO pins"
Translations
2021-02-23 19:32:16 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
bitmaptools: add alphablend This blends two "565"-format bitmaps, including byteswapped ones. All the bitmaps have to have the same memory format. The routine takes about 63ms on a Kaluga when operating on 320x240 bitmaps. Of course, displaying the bitmap also takes time. There's untested code for the L8 (8-bit greyscale) case. This can be enabled once gifio is merged.
2021-11-03 09:35:50 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "Bitmap size and bits per value must match"
msgstr ""
check that boot device is interface #0; remove instrumentation
2021-10-13 12:30:01 -04:00
#: supervisor/shared/safe_mode.c
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
msgid "Boot device must be first (interface #0)."
check that boot device is interface #0; remove instrumentation
2021-10-13 12:30:01 -04:00
msgstr ""
translations
2020-05-20 13:28:17 -04:00
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/busdisplay/BusDisplay.c
make translate
2020-04-14 19:25:21 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Brightness not adjustable"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Update translations
2019-10-21 22:50:17 -04:00
#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Buffer elements must be 4 bytes long or less"
msgstr ""
make translate
2020-04-14 19:25:21 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
Add message ids for translation
2019-08-21 14:19:42 -04:00
msgid "Buffer is not a bytearray."
msgstr ""
[stm] implementation of audiopwmio Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect Tested on a Meowbit
2021-03-06 02:20:16 -05:00
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr ""
locale: update translate
2020-07-02 09:26:05 -04:00
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
shorten error strings
2020-08-21 22:40:46 -04:00
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "Buffer length must be a multiple of 512"
msgstr ""
make Pin hashable
2022-05-03 15:28:42 -04:00
#: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
make translate
2020-07-30 08:19:19 -04:00
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
Update translations
2020-03-30 20:04:33 -04:00
#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/cxd56/common-hal/camera/Camera.c
#: shared-bindings/busdisplay/BusDisplay.c
consolidate and shorten some error messages
2023-08-19 12:14:58 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/struct/__init__.c shared-module/struct/__init__.c
msgid "Buffer too small"
msgstr ""
ParallelImageCapture: Add continuous capture on espressif By having a pair of buffers, the capture hardware can fill one buffer while Python code (including displayio, etc) operates on the other buffer. This increases the responsiveness of camera-using code. On the Kaluga it makes the following improvements: * 320x240 viewfinder at 30fps instead of 15fps using directio * 240x240 animated gif capture at 10fps instead of 7.5fps As discussed at length on Discord, the "usual end user" code will look like this: camera = ... with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: # Do something with frame However, rather than presenting a context manager, the core code consists of three new functions to start & stop continuous capture, and to get the next frame. The reason is twofold. First, it's simply easier to implement the context manager object in pure Python. Second, for more advanced usage, the context manager may be too limiting, and it's easier to iterate on the right design in Python code. In particular, I noticed that adapting the JPEG-capturing programs to use continuous capture mode needed a change in program structure. The camera app was structured as ```python while True: if shutter button was just pressed: capture a jpeg frame else: update the viewfinder ``` However, "capture a jpeg frame" needs to (A) switch the camera settings and (B) capture into a different, larger buffer then (C) return to the earlier settings. This can't be done during continuous capture mode. So just restructuring it as follows isn't going to work: ```python with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: if shutter button was just pressed: capture a jpeg frame, without disturbing continuous capture mode else: update the viewfinder ``` The continuous mode is only implemented in the espressif port; others will throw an exception if the associated methods are invoked. It's not impossible to implement there, just not a priority, since these micros don't have enough RAM for two framebuffer copies at any resonable sizes. The capture code, including single-shot capture, now take mp_obj_t in the common-hal layer, instead of a buffer & length. This was done for the continuous capture mode because it has to identify & return to the user the proper Python object representing the original buffer. In the Espressif port, it was convenient to implement single capture in terms of a multi-capture, which is why I changed the singleshot routine's signature too.
2021-10-27 17:10:20 -04:00
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "Buffers must be same size"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/atmel-samd/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/raspberrypi/common-hal/paralleldisplaybus/ParallelBus.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "Bus pin %d is already in use"
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/UUID.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Byte buffer must be 16 bytes."
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
locale: add translations for aesio This is the result of running `make translate` after creating aesio. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 05:47:44 -04:00
#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr ""
go into safe mode if not CIRCUITPY available
2021-12-27 18:58:24 -05:00
#: supervisor/shared/safe_mode.c
msgid "CIRCUITPY drive could not be found or created."
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "CRC or checksum was invalid"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Camera init"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Can only alarm on RTC IO from deep sleep."
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Can only alarm on one low pin while others alarm high from deep sleep."
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Can only alarm on two low pins from deep sleep."
msgstr ""
Further refine autoreload This unifies the delay into the post-run delay that also waits for user input and fake sleep. This ensures we always delay. Previous code would only delay if the code.py was running when autoreload was triggered. Now it will always delay. We also now suspend autoreload when a USB write starts and then resume on completion. This should prevent reloading in between sectors of a single write.
2022-03-14 19:49:30 -04:00
#: ports/espressif/common-hal/_bleio/Characteristic.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Characteristic.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Can't set CCCD on local Characteristic"
msgstr ""
address review comments
2021-05-05 12:35:12 -04:00
#: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c
#: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c
wip: latent usb device enabling/disabling
2021-04-13 23:33:44 -04:00
msgid "Cannot change USB devices now"
msgstr ""
make translate
2020-08-30 14:35:02 -04:00
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr ""
Update translations
2020-07-17 21:00:58 -04:00
#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Cannot delete values"
Update translations
2019-01-18 14:44:53 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Cannot get pull while in output mode"
msgstr ""
#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr ""
Update translations
2019-12-12 18:33:46 -05:00
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Cannot pull on input-only pin."
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-module/storage/__init__.c
working!
2021-04-29 22:26:38 -04:00
msgid "Cannot remount '/' when visible via USB."
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/microcontroller/__init__.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Cannot reset into bootloader because no bootloader is present"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/socketpool/Socket.c
Separate Socket and SSLSocket, add LWIP connect
2021-01-15 12:01:15 -05:00
msgid "Cannot set socket options"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-bindings/digitalio/DigitalInOut.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Cannot set value when direction is input."
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/UART.c
Addition of translation files
2020-02-19 03:45:07 -05:00
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr ""
slice: restore ability to construct a slice
2021-05-05 09:47:15 -04:00
#: py/objslice.c
msgid "Cannot subclass slice"
msgstr ""
make translate; fix display pins
2021-03-18 23:42:24 -04:00
#: shared-bindings/pwmio/PWMOut.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
update translation file.
2021-02-21 01:37:51 -05:00
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Cannot wake on pin edge, only level"
msgstr ""
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Cannot wake on pin edge. Only level."
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/CharacteristicBuffer.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "CharacteristicBuffer writing not provided"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-module/bitbangio/I2C.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Clock stretch too long"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr ""
Update translations
2019-10-21 22:50:17 -04:00
#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
Add function for drawing polygons to bitmaptools
2023-01-20 17:14:38 -05:00
#: shared-bindings/bitmaptools/__init__.c
msgid "Coordinate arrays have different lengths"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "Coordinate arrays types have different sizes"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/neopixel_write/__init__.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Could not retrieve clock"
msgstr ""
make translate
2020-08-14 09:37:09 -04:00
#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr ""
make translate; fix display pins
2021-03-18 23:42:24 -04:00
#: shared-bindings/pwmio/PWMOut.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgid "Could not start PWM"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
#: shared-module/audiomp3/MP3Decoder.c
audiocore: Add MP3File using Adafruit_MP3 library
2019-11-26 10:29:55 -05:00
msgid "Couldn't allocate decoder"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/atmel-samd/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplaybus/ParallelBus.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Data 0 pin must be byte aligned"
msgstr ""
make translate
2019-07-25 22:13:50 -04:00
#: shared-module/audiocore/WaveFile.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Data chunk must follow fmt chunk"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
Enable a BLE workflow nRF CircuitPython boards will now provide the file transfer service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer USB capable boards will only advertise if previously bonded to a device or if the reset button is pressed during the fast blue flashes on start up. When pressed, the board will restart again but the blue period will not flash. Boards without USB will always advertise. When previously bonded, the advertisement is private so that no other peers can connect. If advertising publicly, the tx power is lowered to reduce the likelihood of bonding from a distance. This PR also fixes issues with loading identities of bonded peers so that our address can now be resolved and we can resolve others' addresses when scanning.
2021-05-19 19:22:07 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data not supported with directed advertising"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
Update translations
2019-10-21 22:50:17 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Data too large for advertisement packet"
msgstr ""
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Deep sleep pins must use a rising edge with pulldown"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr ""
run 'make translate'
2019-09-08 18:31:01 -04:00
#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/busdisplay/BusDisplay.c
make translate
2020-04-14 19:25:21 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
Add message ids for translation
2019-08-21 14:19:42 -04:00
msgid "Display must have a 16 bit colorspace."
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/epaperdisplay/EPaperDisplay.c
make translate
2020-04-14 19:25:21 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Display rotation must be in 90 degree increments"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Enable title bar on all builds * Tweak scroll area position so last line is complete and top is under the title bar. * Pick Blinka size based on the font to minimize unused space in title bar. Related to #2791 * Update the title bar after terminal is started. Fixes #6078 Fixes #6668
2022-08-03 15:13:27 -04:00
#: main.c
msgid "Done"
msgstr ""
Add translation file locations back. Skip line numbers because they cause diff churn. Also, keep sorting by msgid to prevent churn from adding new files.
2019-03-08 15:47:04 -05:00
#: shared-bindings/digitalio/DigitalInOut.c
Remove file locations
2019-02-22 15:04:54 -05:00
msgid "Drive mode not used when direction is input."
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Recursively print chained exceptions
2022-10-16 17:21:48 -04:00
#: py/obj.c
msgid "During handling of the above exception, another exception occurred:"
msgstr ""
locale: add translations for aesio This is the result of running `make translate` after creating aesio. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 05:47:44 -04:00
#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/canio/CAN.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "ESP-IDF memory allocation failed"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/cxd56/common-hal/pulseio/PulseIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "EXTINT channel already in use"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modre.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Error in regex"
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: supervisor/shared/safe_mode.c
msgid "Error in safemode.py."
msgstr ""
Separate Socket and SSLSocket, add LWIP connect
2021-01-15 12:01:15 -05:00
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
translations
2020-12-21 14:14:31 -05:00
msgid "Error: Failure to bind"
msgstr ""
changed alarm.time API
2020-11-25 15:07:57 -05:00
#: shared-bindings/alarm/__init__.c
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
msgid "Expected a kind of %q"
changed alarm.time API
2020-11-25 15:07:57 -05:00
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
Add another error message for extended advertisements at the same time as scan response. The SD can't do it.
2020-02-05 18:54:31 -05:00
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/ssl/SSLSocket.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Failed SSL handshake"
msgstr ""
Add PS/2 support -- ps2io module
2019-05-15 22:29:34 -04:00
#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr ""
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/nrf/sd_mutex.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
Support for publishing TXT records via mDNS - Update lwIP+Raspberry Pi implementation to use lwIP API correctly - Add translations
2023-07-30 22:39:34 -04:00
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Failed to add service TXT record"
msgstr ""
#: shared-bindings/mdns/Server.c
msgid ""
"Failed to add service TXT record; non-string or bytes found in txt_records"
msgstr ""
Restore automatic gc_collect() after an import
2022-05-18 11:37:13 -04:00
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Failed to allocate %q buffer"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/wifi/__init__.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Failed to allocate Wifi memory"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/wifi/ScannedNetworks.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Failed to allocate wifi scan memory"
msgstr ""
[stm] implementation of audiopwmio Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect Tested on a Meowbit
2021-03-06 02:20:16 -05:00
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Failed to buffer the sample"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
Update translations
2019-10-21 22:50:17 -04:00
msgid "Failed to connect: internal error"
Fix esp and samd
2018-08-16 16:34:12 -04:00
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Failed to connect: timeout"
update translate string
2018-09-25 15:10:44 -04:00
msgstr ""
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
#: shared-module/audiomp3/MP3Decoder.c
audiocore: Add MP3File using Adafruit_MP3 library
2019-11-26 10:29:55 -05:00
msgid "Failed to parse MP3 file"
msgstr ""
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/nrf/sd_mutex.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "Failed to release mutex, err 0x%04x"
update translate string
2018-09-25 15:10:44 -04:00
msgstr ""
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
msgid "File exists"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
update source locations in translation file
2022-12-09 15:11:57 -05:00
#: shared-module/os/getenv.c
dotenv becomes settings.toml
2022-12-01 17:43:08 -05:00
msgid "File not found"
msgstr ""
make translate
2020-09-21 17:45:51 -04:00
#: ports/atmel-samd/common-hal/canio/Listener.c
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/Listener.c
displayio: Add make_transparent to ColorConverter
2020-10-11 18:29:16 -04:00
#: ports/stm/common-hal/canio/Listener.c
make translate
2020-09-21 17:45:51 -04:00
msgid "Filters too complex"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/dualbank/__init__.c
improve `dualbank` errors
2022-10-15 03:50:10 -04:00
msgid "Firmware is duplicate"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is invalid"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is too big"
make translate again
2020-12-23 22:52:27 -05:00
msgstr ""
bitmaptools: add alphablend This blends two "565"-format bitmaps, including byteswapped ones. All the bitmaps have to have the same memory format. The routine takes about 63ms on a Kaluga when operating on 320x240 bitmaps. Of course, displaying the bitmap also takes time. There's untested code for the L8 (8-bit greyscale) case. This can be enabled once gifio is merged.
2021-11-03 09:35:50 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel"
msgstr ""
locale: make translate
2020-09-11 07:31:34 -04:00
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr ""
Update based on PR Comments
2022-04-14 06:45:16 -04:00
#: ports/mimxrt10xx/common-hal/microcontroller/Processor.c
Deleted Warnings Chanaged ValueError Method
2022-04-17 15:04:16 -04:00
msgid ""
"Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz"
Update based on PR Comments
2022-04-14 06:45:16 -04:00
msgstr ""
make translate; fix display pins
2021-03-18 23:42:24 -04:00
#: shared-bindings/pwmio/PWMOut.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "GNSS init"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Generic Failure"
msgstr ""
make translate
2020-04-14 19:25:21 -04:00
#: shared-bindings/framebufferio/FramebufferDisplay.c
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-module/busdisplay/BusDisplay.c
update translations
2022-12-08 15:12:59 -05:00
#: shared-module/framebufferio/FramebufferDisplay.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Group already used"
msgstr ""
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "Half duplex SPI is not implemented"
msgstr ""
improve hard fault message
2023-08-19 10:07:46 -04:00
#: supervisor/shared/safe_mode.c
msgid "Hard fault: memory access or instruction error."
msgstr ""
Unify some error strings
2023-07-20 14:16:31 -04:00
#: ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgid "Hardware in use, try alternative pins"
msgstr ""
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
#: supervisor/shared/safe_mode.c
msgid "Heap allocation when VM not running."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"Heap was corrupted because the stack was too small. Increase stack size."
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/busio/I2C.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "I2C init error"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/busio/I2C.c
error at runtime if no psram actually reserved
2022-08-23 12:34:22 -04:00
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgid "I2C peripheral in use"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
make translate
2021-03-02 12:04:32 -05:00
msgid "In-buffer elements must be <= 4 bytes long"
Translations
2021-02-23 19:32:16 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Init program size invalid"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
translation update
2021-02-26 18:18:50 -05:00
msgid "Initial set pin direction conflicts with initial out pin direction"
Translations
2021-02-23 19:32:16 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin state conflicts with initial out pin state"
msgstr ""
bitops: rename from _bit_transpose, describe the algorithm
2021-02-18 16:41:23 -05:00
#: shared-bindings/bitops/__init__.c
bit_transpose: Support from 2 to 7 strands, not just 8
2021-02-18 12:33:13 -05:00
#, c-format
msgid "Input buffer length (%d) must be a multiple of the strand count (%d)"
core: add bit_transpose function .. this version can only handle exactly 8 bits "across". The restriction may be relaxed in a future revision.
2021-02-16 19:37:11 -05:00
msgstr ""
Adding error message for PulseIn
2020-08-01 14:45:31 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: ports/espressif/common-hal/neopixel_write/__init__.c py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Input/output error"
msgstr ""
Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.
2019-11-20 16:53:50 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr ""
Update translations
2019-11-21 19:50:34 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr ""
Initial broadcom port for Raspberry Pi This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4 and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes outside of the ports directory for it. There are a couple other cleanups that were incidental: * Use const mcu_pin_obj_t instead of omitting the const. The structs themselves are const because they are in ROM. * Use PTR <-> OBJ conversions in more places. They were found when mp_obj_t was set to an integer type rather than pointer. * Optimize submodule checkout because the Pi submodules are heavy and unnecessary for the vast majority of builds. Fixes #4314
2021-08-04 19:27:54 -04:00
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Interface must be started"
msgstr ""
espidf: Add function to erase nvs This may be necessary for some cases of migrating from 6.3.0 to 7.0.0.
2021-08-25 12:37:37 -04:00
#: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c
wip, with debugging printf's
2021-07-29 13:26:10 -04:00
msgid "Internal audio buffer too small"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
update source locations in translation file
2022-12-09 15:11:57 -05:00
#: shared-module/os/getenv.c
espressif: Implement parallel display using i2s
2021-09-08 17:38:02 -04:00
msgid "Internal error"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr ""
Safe mode when ESP interrupt watchdog fires This makes us enter safe mode when sleep on the S3 fails. The task watchdog is used for the user watchdog.
2022-06-29 15:31:18 -04:00
#: supervisor/shared/safe_mode.c
msgid "Internal watchdog timer expired."
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: supervisor/shared/safe_mode.c
msgid "Interrupt error."
msgstr ""
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
#: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
Add PicoDVI support PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit color are half resolution. Memory layout is modified to give the top most 4k of ram to the second core. Its MPU is used to prevent flash access after startup. The port saved word is moved to a watchdog scratch register so that it doesn't get overwritten by other things in RAM. Right align status bar and scroll area. This normally gives a few pixels of padding on the left hand side and improves the odds it is readable in a case. Fixes #7562 Fixes c stack checking. The length was correct but the top was being set to the current stack pointer instead of the correct top. Fixes #7643 This makes Bitmap subscr raise IndexError instead of ValueError when the index arguments are wrong.
2023-04-07 14:59:55 -04:00
#: ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
#: ports/raspberrypi/bindings/picodvi/Framebuffer.c
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c py/argcheck.c
fix typos (partial) detected by codepell
2023-03-18 11:17:02 -04:00
#: shared-bindings/digitalio/DigitalInOut.c
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/epaperdisplay/EPaperDisplay.c
sdioio: Add shared-bindings There is no implementation yet.
2020-06-26 11:10:39 -04:00
msgid "Invalid %q"
msgstr ""
Add Bangle.js 2, JDI memory displays and ACeP epd This 2-in-1 PR started with the goal of support the Bangle.js 2 smartwatch with *no USB*. * Adds "secure" DFU build support with a committed private key. * Adds 3-bit color support with one dummy bit for the JDI memory display * Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK. This is needed because the Bangle.js 2 uses the watchdog to reset. * Renamed port_background_task() to port_background_tick() to indicate it runs on tick, not RUN_BACKGROUND_TASK. * Marks serial connected when the display terminal is inited. This means that safe mode messages show up on the display. ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that support as well. * Adds 3-bit ACeP color support for 7-color e-paper displays. (Not watch related but similar due to color depth.) * Allows a refresh sequence instead of a single int command. The 7" ACeP display requires a data byte for refresh. * Adds optional delay after resetting the display. The ACeP displays need this. (Probably to load LUTs from flash.) * Adds a cleaning phase for ACeP displays before the real refresh. For both: * Add dither support to Palette. * Palette no longer converts colors when set. Instead, it caches converted colors at each index. * ColorConverter now caches the last converted color. It should make conversions faster for repeated colors (not dithering.)
2022-07-30 01:09:49 -04:00
#: ports/atmel-samd/common-hal/microcontroller/Pin.c
Add DotClockFramebuffer
2023-08-09 10:33:20 -04:00
#: ports/espressif/common-hal/dotclockframebuffer/DotClockFramebuffer.c
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
#: ports/mimxrt10xx/common-hal/microcontroller/Pin.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: shared-bindings/microcontroller/Pin.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Invalid %q pin"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
Improve error for invalid parameters
2021-05-19 17:09:11 -04:00
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Invalid BLE parameter"
msgstr ""
Add new error msg to translation
2020-09-16 20:08:11 -04:00
#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr ""
update translation
2021-11-15 10:18:00 -05:00
#: shared-bindings/wifi/Radio.c
msgid "Invalid MAC address"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Invalid argument"
msgstr ""
#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr ""
update source locations in translation file
2022-12-09 15:11:57 -05:00
#: shared-module/os/getenv.c
dotenv becomes settings.toml
2022-12-01 17:43:08 -05:00
#, c-format
msgid "Invalid byte %.*s"
msgstr ""
ParallelImageCapture: Switch to taking a list of pins .. adopting validate_pins from RGBMatrix into shared-bindings .. updating other platforms for API change
2021-06-09 13:15:31 -04:00
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "Invalid data_pins[%d]"
msgstr ""
add unsigned ints and 64 bit types to msgpack change msgpack error message when format invalid
2022-07-17 04:17:05 -04:00
#: shared-module/msgpack/__init__.c
msgid "Invalid format"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr ""
change hex radio password validation; add password length doc
2023-04-20 09:47:25 -04:00
#: shared-bindings/wifi/Radio.c
msgid "Invalid hex password"
msgstr ""
update translation
2021-11-15 10:18:00 -05:00
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Invalid multicast MAC address"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Invalid size"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/ssl/SSLContext.c
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
translations
2020-12-21 14:14:31 -05:00
msgid "Invalid socket for TLS"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Invalid state"
msgstr ""
update source locations in translation file
2022-12-09 15:11:57 -05:00
#: shared-module/os/getenv.c
dotenv becomes settings.toml
2022-12-01 17:43:08 -05:00
msgid "Invalid unicode escape"
msgstr ""
locale: add translations for aesio This is the result of running `make translate` after creating aesio. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 05:47:44 -04:00
#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr ""
update source locations in translation file
2022-12-09 15:11:57 -05:00
#: shared-module/os/getenv.c
dotenv becomes settings.toml
2022-12-01 17:43:08 -05:00
msgid "Key not found"
msgstr ""
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
#: shared-module/is31fl3741/FrameBuffer.c
Check map to display size
2021-11-20 14:41:18 -05:00
msgid "LED mappings must match display size"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr ""
#: shared-module/displayio/Group.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Layer already in a group"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: shared-module/displayio/Group.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Layer must be a Group or TileGrid subclass"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "MAC address was invalid"
msgstr ""
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
#: shared-bindings/is31fl3741/IS31FL3741.c
Initial commit
2021-12-04 13:16:35 -05:00
msgid "Mapping must be a tuple"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
Revamp background writing Now a 'once' and a 'loop' buffer can be specified. 'once' is useful for things like writing a neopixel strip in the background, if you can guarantee the buffer contents are stable until the write is complete. 'loop' is useful for periodic things, like pwm & servos. both together are useful for some special cases of pwm/servo, where a transitional waveform needs to be played for one repetition and then a new waveform needs to be played after that. The API is renamed to reflect that it's a more generic 'background' operation.
2022-04-23 14:09:36 -04:00
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched data size"
msgstr ""
StateMachine: add swap flag Always use DMA if swap flag is enabled. Improve docs a bit
2022-05-06 16:18:59 -04:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched swap flag"
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_in_pin. %q[%u] reads pin(s)"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_in_pin. %q[%u] shifts in from pin(s)"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_in_pin. %q[%u] waits based on pin"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_out_pin. %q[%u] shifts out to pin(s)"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_out_pin. %q[%u] writes pin(s)"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing first_set_pin. %q[%u] sets pin(s)"
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
msgstr ""
add atexit module
2021-07-29 23:06:24 -04:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
rp2: Add StateMachine.may_exec and also sanity-check the init instructions, thanks to the newly factored-out checker. Closes: #8221
2023-07-27 12:39:40 -04:00
msgid "Missing jmp_pin. %q[%u] jumps on pin"
add atexit module
2021-07-29 23:06:24 -04:00
msgstr ""
Fix crash when UART construct fails After the script stops with the exception thrown the final gc_sweep will call any finalizers and they usually call deinit. deinit on invalid objects can wreak havoc by changing random memory or (hopefully) crashing. This fixes ensures the object is deinited until initialization succeeds and the object is valid. Do the same fix for I2C and SPI too. Fixes #4700 and fixes #5005
2021-07-20 20:08:22 -04:00
#: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Must be a %q subclass."
msgstr ""
Add DotClockFramebuffer
2023-08-09 10:33:20 -04:00
#: ports/espressif/common-hal/dotclockframebuffer/DotClockFramebuffer.c
msgid "Must provide 5/6/5 RGB pins"
msgstr ""
make translate
2020-09-24 17:56:07 -04:00
#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgid "Must provide MISO or MOSI pin"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
Make error messages platform agnostic Remove mentions of 'MicroPython' in error messages as they could lead to confusion in lesser-experienced users
2021-04-10 19:36:53 -04:00
#: supervisor/shared/safe_mode.c
msgid "NLR jump failed. Likely memory corruption."
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/nvm/ByteArray.c
nvm implementation for esp32s2
2020-11-11 12:41:12 -05:00
msgid "NVS Error"
msgstr ""
Make the "name or service not known" message translatable
2022-12-26 14:57:15 -05:00
#: shared-bindings/socketpool/SocketPool.c
msgid "Name or service not known"
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: py/qstr.c
make translate
2020-03-02 10:13:06 -05:00
msgid "Name too long"
msgstr ""
enforce new bitmap same size as previous
2022-04-18 21:31:47 -04:00
#: shared-bindings/displayio/TileGrid.c
msgid "New bitmap must be same size as old bitmap"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
msgid "Nimble out of memory"
msgstr ""
Shrink by combining error messages
2023-05-18 19:24:37 -04:00
#: ports/atmel-samd/common-hal/busio/UART.c
Unify some error strings
2023-07-20 14:16:31 -04:00
#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/stm/common-hal/busio/UART.c shared-bindings/fourwire/FourWire.c
#: shared-bindings/i2cdisplaybus/I2CDisplayBus.c
#: shared-bindings/paralleldisplaybus/ParallelBus.c
#: shared-module/bitbangio/SPI.c
Shrink by combining error messages
2023-05-18 19:24:37 -04:00
msgid "No %q pin"
msgstr ""
Further refine autoreload This unifies the delay into the post-run delay that also waits for user input and fake sleep. This ensures we always delay. Previous code would only delay if the code.py was running when autoreload was triggered. Now it will always delay. We also now suspend autoreload when a USB write starts and then resume on completion. This should prevent reloading in between sectors of a single write.
2022-03-14 19:49:30 -04:00
#: ports/espressif/common-hal/_bleio/Characteristic.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Characteristic.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/analogio/AnalogOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "No DAC on chip"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "No DMA channel found"
msgstr ""
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA pacing timer found"
msgstr ""
countio: add selectable rise and fall detection, pulls
2021-12-30 21:49:52 -05:00
#: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c
Added doc and translations
2020-10-26 17:54:24 -04:00
#, c-format
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
msgid "No I2C device at address: 0x%x"
Added doc and translations
2020-10-26 17:54:24 -04:00
msgstr ""
Wi-Fi autoconnect and title bar status This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD in `/.env`. When both are defined, CircuitPython will attempt to connect to the network even when user code isn't running. If the user code attempts to a network with the same SSID, it will return immediately. Connecting to another SSID will disconnect from the auto-connected network. If the user code initiates the connection, then it will be shutdown after user code exits. (Should match <8 behavior.) This PR also reworks the default displayio terminal. It now supports a title bar TileGrid in addition to the (newly renamed) scroll area. The default title bar is the top row of the display and is positioned to the right of the Blinka logo when it is enabled. The scroll area is now below the Blinka logo. The Wi-Fi auto-connect code now uses the title bar to show its state including the IP address when connected. It does this through the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s> is the title bar string. This is commonly supported by terminals so it should work over USB and UART as well. Related to #6174
2022-06-06 19:54:02 -04:00
#: supervisor/shared/web_workflow/web_workflow.c
msgid "No IP"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
ParallelImageCapture: Add continuous capture on espressif By having a pair of buffers, the capture hardware can fill one buffer while Python code (including displayio, etc) operates on the other buffer. This increases the responsiveness of camera-using code. On the Kaluga it makes the following improvements: * 320x240 viewfinder at 30fps instead of 15fps using directio * 240x240 animated gif capture at 10fps instead of 7.5fps As discussed at length on Discord, the "usual end user" code will look like this: camera = ... with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: # Do something with frame However, rather than presenting a context manager, the core code consists of three new functions to start & stop continuous capture, and to get the next frame. The reason is twofold. First, it's simply easier to implement the context manager object in pure Python. Second, for more advanced usage, the context manager may be too limiting, and it's easier to iterate on the right design in Python code. In particular, I noticed that adapting the JPEG-capturing programs to use continuous capture mode needed a change in program structure. The camera app was structured as ```python while True: if shutter button was just pressed: capture a jpeg frame else: update the viewfinder ``` However, "capture a jpeg frame" needs to (A) switch the camera settings and (B) capture into a different, larger buffer then (C) return to the earlier settings. This can't be done during continuous capture mode. So just restructuring it as follows isn't going to work: ```python with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: if shutter button was just pressed: capture a jpeg frame, without disturbing continuous capture mode else: update the viewfinder ``` The continuous mode is only implemented in the espressif port; others will throw an exception if the associated methods are invoked. It's not impossible to implement there, just not a priority, since these micros don't have enough RAM for two framebuffer copies at any resonable sizes. The capture code, including single-shot capture, now take mp_obj_t in the common-hal layer, instead of a buffer & length. This was done for the continuous capture mode because it has to identify & return to the user the proper Python object representing the original buffer. In the Espressif port, it was convenient to implement single capture in terms of a multi-capture, which is why I changed the singleshot routine's signature too.
2021-10-27 17:10:20 -04:00
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "No capture in progress"
msgstr ""
Cache configuration descriptor We use it to open endpoints as they are used. Fetching the descriptor as needed can cause issues with devices that we're expecting a control packet while another transaction was ongoing. Specifically, a usb thumb drive didn't expect a control transaction while doing a SCSI transaction. This PR also aborts transactions on timeout or ctrl-c interrupt. It doesn't always recover though...
2023-08-02 14:03:43 -04:00
#: shared-module/usb/core/Device.c
msgid "No configuration set"
msgstr ""
make translate; remove PO-Revision-Date to reduce merge changes in .po files
2020-04-30 09:18:48 -04:00
#: shared-bindings/_bleio/PacketBuffer.c
make translate
2020-05-04 19:52:24 -04:00
msgid "No connection: length cannot be determined"
make translate; remove PO-Revision-Date to reduce merge changes in .po files
2020-04-30 09:18:48 -04:00
msgstr ""
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 19:58:50 -04:00
#: shared-bindings/board/__init__.c
msgid "No default %q bus"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in in program"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in or out in program"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/objint.c shared-bindings/time/__init__.c
make translate
2020-05-08 18:15:50 -04:00
msgid "No long integer support"
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No out in program"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/espressif/common-hal/busio/I2C.c
Ran make translate to generate circuitpython.pot
2021-02-02 17:57:03 -05:00
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "No pull up found on SDA or SCL; check your wiring"
msgstr ""
make translate
2019-08-20 13:02:01 -04:00
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "No space left on device"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
Correct errno messages
2022-05-10 14:01:30 -04:00
msgid "No such device"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "No such file/directory"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-module/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
msgid "No timer available"
msgstr ""
Three small changes 1. Raise an exception when creating a USB device when host isn't initialized. 2. Mark RP2040 dtcm_bss as NOLOAD since it doesn't need to be loaded (just zeroed.) 3. Fix submodule location for ulab to Jeff's copy.
2023-08-01 16:16:38 -04:00
#: shared-module/usb/core/Device.c
msgid "No usb host port initialized"
msgstr ""
Fix central pairing and crash on clear The list_clear would crash if we tried to clear a NULL list. (It can happen if we haven't tried to discover any services.)
2021-03-31 19:04:04 -04:00
#: ports/nrf/common-hal/_bleio/__init__.c
Ran make translate
2021-04-02 15:34:16 -04:00
msgid "Nordic system firmware out of memory"
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
Changes based on Dan's feedback
2020-09-03 19:32:12 -04:00
msgid "Not a valid IP string"
Update translations
2020-08-25 19:40:45 -04:00
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
Update translations
2019-10-21 22:50:17 -04:00
#: ports/nrf/common-hal/_bleio/__init__.c
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/CharacteristicBuffer.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "Not connected"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
Merge remote-tracking branch 'origin/master' into nrf-pwm-audio
2019-07-31 17:32:54 -04:00
#: shared-bindings/audiopwmio/PWMAudioOut.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "Not playing"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
espressif: Implement parallel display using i2s
2021-09-08 17:38:02 -04:00
#, c-format
msgid "Number of data_pins must be 8 or 16, not %d"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr ""
Add BLE status to title bar
2022-08-03 17:35:28 -04:00
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Off"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Ok"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
Resolve `#8610`
2023-11-15 09:59:43 -05:00
#, c-format
msgid "Only 8 or 16 bit mono with %dx oversampling supported."
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/wifi/__init__.c
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/wifi/__init__.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Only IPv4 addresses supported"
msgstr ""
Add more ESP32 boards and enable web workflow
2022-07-29 20:01:41 -04:00
#: ports/espressif/common-hal/socketpool/Socket.c
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/socketpool/Socket.c
translations
2020-11-24 15:40:27 -05:00
msgid "Only IPv4 sockets supported"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""
Enable a BLE workflow nRF CircuitPython boards will now provide the file transfer service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer USB capable boards will only advertise if previously bonded to a device or if the reset button is pressed during the fast blue flashes on start up. When pressed, the board will restart again but the blue period will not flash. Boards without USB will always advertise. When previously bonded, the advertisement is private so that no other peers can connect. If advertising publicly, the tx power is lowered to reduce the likelihood of bonding from a distance. This PR also fixes issues with loading identities of bonded peers so that our address can now be resolved and we can resolve others' addresses when scanning.
2021-05-19 19:22:07 -04:00
#: shared-bindings/_bleio/Adapter.c
msgid "Only connectable advertisements can be directed"
msgstr ""
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Only edge detection is available on this hardware"
msgstr ""
Removed 'raw' from error message 'raw in'
2021-05-22 06:36:28 -04:00
#: shared-bindings/ipaddress/__init__.c
msgid "Only int or string supported for ip"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
Update translations
2019-08-22 15:59:17 -04:00
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
add coproc alarm
2022-10-20 05:26:10 -04:00
msgid "Only one %q can be set in deep sleep."
make translate
2020-11-27 23:57:59 -05:00
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: ports/espressif/common-hal/espulp/ULPAlarm.c
msgid "Only one %q can be set."
msgstr ""
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:06:18 -04:00
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
error at runtime if no psram actually reserved
2022-08-23 12:34:22 -04:00
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
re-adding samd messages
2021-10-09 17:03:42 -04:00
msgid "Only one address is allowed"
msgstr ""
Setup outline for SAMD alarm module
2021-07-23 14:09:28 -04:00
#: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c
update translation file.
2021-02-21 01:37:51 -05:00
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/time/TimeAlarm.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Only one alarm.time alarm can be set"
msgstr ""
#: ports/espressif/common-hal/alarm/time/TimeAlarm.c
#: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
fixes and enhancement for touch alarm - prevent touch alarm initialization if not set - fix wake_alarm is set to touch alarm on autoreload - add ability to have multiple touch alarms in light sleep
2021-01-11 05:00:45 -05:00
msgid "Only one alarm.time alarm can be set."
expose wake pin parameter and more tweaks
2020-12-19 10:24:36 -05:00
msgstr ""
displayio: new translation strings
2020-10-14 23:22:48 -04:00
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
Correct errno messages
2022-05-10 14:01:30 -04:00
msgid "Operation not permitted"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Operation or feature not supported"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Operation timed out"
msgstr ""
Add MDNS support to Pico W This adds both cpy-MAC.local and circuitpython.local support. Fixes #7214
2022-11-22 20:10:54 -05:00
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Out of MDNS service slots"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Out of memory"
msgstr ""
Add more ESP32 boards and enable web workflow
2022-07-29 20:01:41 -04:00
#: ports/espressif/common-hal/socketpool/Socket.c
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/socketpool/Socket.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Out of sockets"
msgstr ""
make translate
2021-03-02 12:04:32 -05:00
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/pwmio/PWMOut.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "PWM restart"
msgstr ""
Added counters per slice
2021-02-27 16:17:27 -05:00
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice already in use"
msgstr ""
Counter and PWMOut slice conflict check
2021-03-02 20:32:06 -05:00
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice channel A already in use"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/audiobusio/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Peripheral in use"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Permission denied"
msgstr ""
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Pin cannot wake from Deep Sleep"
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large"
msgstr ""
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin interrupt already in use"
msgstr ""
countio: add selectable rise and fall detection, pulls
2021-12-30 21:49:52 -05:00
#: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c
Update translations
2020-05-20 11:55:32 -04:00
msgid "Pin is input only"
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "Pin must be on PWM Channel B"
msgstr ""
refactor countio based on feedback
2020-05-05 01:23:38 -04:00
#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes. If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
ParallelImageCapture: Switch to taking a list of pins .. adopting validate_pins from RGBMatrix into shared-bindings .. updating other platforms for API change
2021-06-09 13:15:31 -04:00
#: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
make translate
2021-03-04 15:23:06 -05:00
msgid "Pins must be sequential"
msgstr ""
re-adding samd messages
2021-10-09 17:03:42 -04:00
#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential GPIO pins"
msgstr ""
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice"
msgstr ""
Align fatfs window buffer for tinyusb Also, update tinyusb.
2023-07-27 12:15:58 -04:00
#: shared-module/usb/core/Device.c
msgid "Pipe error"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""
translations for polygon
2020-05-18 16:33:16 -04:00
#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""
consolidate and shorten some error messages
2023-08-19 12:14:58 -04:00
#: supervisor/shared/safe_mode.c
msgid "Power dipped. Make sure you are providing enough power."
msgstr ""
Update translations
2019-10-21 22:50:17 -04:00
#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: main.c
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
msgstr ""
#: main.c
Make translate
2020-12-23 18:00:53 -05:00
msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does IN without loading ISR"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does OUT without loading OSR"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Program size invalid"
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: ports/espressif/common-hal/espulp/ULP.c
msgid "Program too long"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
A variety of displayio improvements This changes a number of things in displayio: * Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with a font it is available as board.TERMINAL_FONT. Fixes #1172 * Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191 * Add width and height properties to Bitmap. * Add insert and [] access to Group. Fixes #1518 * Add index param to pop on Group. * Terminal no longer takes unicode character info. It takes a BuiltinFont instead. * Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history. * Add x and y positions to Group plus scale as well. * Add bitmap accessor for BuiltinFont
2019-02-06 15:13:17 -05:00
msgstr ""
countio: add selectable rise and fall detection, pulls
2021-12-30 21:49:52 -05:00
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "RISE_AND_FALL not available on this chip"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "RS485"
make translate
2021-01-17 22:30:41 -05:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/UART.c
Addition of translation files
2020-02-19 03:45:07 -05:00
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
make translate
2020-11-27 23:57:59 -05:00
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
msgid "RTC is not supported on this board"
Update translations
2019-01-18 14:44:53 -05:00
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
Improve type validation errors messages, especially for pins
2023-01-10 13:39:10 -05:00
#: shared-bindings/_bleio/__init__.c
Update translations
2020-07-17 21:00:58 -04:00
#: shared-bindings/memorymonitor/AllocationSize.c
Align fatfs window buffer for tinyusb Also, update tinyusb.
2023-07-27 12:15:58 -04:00
#: shared-bindings/pulseio/PulseIn.c shared-module/bitmaptools/__init__.c
#: shared-module/displayio/Bitmap.c
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
msgid "Read-only"
Introduce displayio to render graphics to displays. It's designed to minimize RAM footprint by using Sprites to represent objects on the screen. The object model also facilitates partial screen updating which reduces the bandwidth needed to display. This is all handled in C. Python simply manipulates the objects with the ability to synchronize to frame timing.
2018-08-15 14:01:01 -04:00
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/vfs_fat.c py/moderrno.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Read-only filesystem"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Received response was invalid"
msgstr ""
Add BLE status to title bar
2022-08-03 17:35:28 -04:00
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Reconnecting"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/epaperdisplay/EPaperDisplay.c
Update translations
2019-08-22 15:59:17 -04:00
msgid "Refresh too soon"
msgstr ""
make translate
2020-09-28 18:22:15 -04:00
#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr ""
locale: add translations for aesio This is the result of running `make translate` after creating aesio. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 05:47:44 -04:00
#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Requested resource not found"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr ""
#: main.c
Fix endpoint checking; Clean up safe mode printing.
2021-05-12 15:53:52 -04:00
msgid "Running in safe mode! Not running saved code.\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "SD card CSD format not supported"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "SDCard init"
msgstr ""
make translate
2020-07-30 08:19:19 -04:00
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr ""
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: ports/espressif/common-hal/busio/SPI.c
msgid "SPI configuration failed"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "SPI init error"
update idf to v4.3 - update idf submodule to release/v4.3 - finish todo tasks held due to idf@v4.2 - update SPI & I2C to make them v4.3 compatible
2021-06-24 11:41:12 -04:00
msgstr ""
Adding countio to rp2040
2021-02-23 20:26:11 -05:00
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "SPI peripheral in use"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: ports/stm/common-hal/busio/SPI.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
msgid "SPI re-init"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
#: shared-bindings/is31fl3741/FrameBuffer.c
Mapping for LEDs to diplay
2021-11-20 13:42:58 -05:00
msgid "Scale dimensions must divide by 3"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
Update translations
2019-10-21 22:50:17 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
fix typos (partial) detected by codepell
2023-03-18 11:17:02 -04:00
msgid "Scan already in progress. Stop with stop_scan."
Update translations
2019-10-21 22:50:17 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/ssl/SSLContext.c
Changes based on Dan's feedback
2020-09-03 19:32:12 -04:00
msgid "Server side context cannot have hostname"
Update translations
2020-08-25 19:40:45 -04:00
msgstr ""
locale: make translate
2020-09-02 09:44:51 -04:00
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr ""
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
add coproc module
2022-10-19 11:05:48 -04:00
#: shared-bindings/nvm/ByteArray.c
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
msgid "Slice and value different lengths."
Update translations
2018-08-20 12:39:11 -04:00
msgstr ""
Update translations and sort input files This should stabilize the sort of files in the .po files. Fixes #1871
2019-05-13 21:04:53 -04:00
#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
Update translations
2020-07-17 21:00:58 -04:00
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
msgid "Slices not supported"
Update translations
2018-08-20 12:39:11 -04:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/socketpool/SocketPool.c
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/socketpool/SocketPool.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "SocketPool can only be used with wifi.radio"
msgstr ""
locale: add translations for aesio This is the result of running `make translate` after creating aesio. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 05:47:44 -04:00
#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-bindings/paralleldisplaybus/ParallelBus.c
espressif: Implement parallel display using i2s
2021-09-08 17:38:02 -04:00
msgid "Specify exactly one of data0 or data_pins"
msgstr ""
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo left must be on PWM channel A"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo right must be on PWM channel B"
msgstr ""
make translate
2020-11-27 23:57:59 -05:00
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-bindings/gnss/GNSS.c
locale: update translate
2020-06-24 05:10:37 -04:00
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-28 23:31:12 -04:00
#: supervisor/shared/safe_mode.c
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
msgid "The `microcontroller` module was used to boot into safe mode."
Merge latest adafruit/master in.
2019-05-10 13:09:56 -04:00
msgstr ""
Recursively print chained exceptions
2022-10-16 17:21:48 -04:00
#: py/obj.c
msgid "The above exception was the direct cause of the following exception:"
msgstr ""
rgbmatrix: Check that the number of rgb pins is supported. Having zero RGB pins may not have been caught, nor having a non-multiple-of-6 value. Generally, users will only have 6 RGB pins unless they are driving multiple matrices in parallel. No existing breakouts exist to do this, and there are probably not any efficient pinouts to be had anyway.
2020-09-28 20:03:04 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-module/audiomixer/MixerVoice.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-module/audiomixer/MixerVoice.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "The sample's channel count does not match the mixer's"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-module/audiomixer/MixerVoice.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "The sample's sample rate does not match the mixer's"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-module/audiomixer/MixerVoice.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "The sample's signedness does not match the mixer's"
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: supervisor/shared/safe_mode.c
msgid "Third-party firmware fatal error."
msgstr ""
ParallelImageCapture: Add continuous capture on espressif By having a pair of buffers, the capture hardware can fill one buffer while Python code (including displayio, etc) operates on the other buffer. This increases the responsiveness of camera-using code. On the Kaluga it makes the following improvements: * 320x240 viewfinder at 30fps instead of 15fps using directio * 240x240 animated gif capture at 10fps instead of 7.5fps As discussed at length on Discord, the "usual end user" code will look like this: camera = ... with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: # Do something with frame However, rather than presenting a context manager, the core code consists of three new functions to start & stop continuous capture, and to get the next frame. The reason is twofold. First, it's simply easier to implement the context manager object in pure Python. Second, for more advanced usage, the context manager may be too limiting, and it's easier to iterate on the right design in Python code. In particular, I noticed that adapting the JPEG-capturing programs to use continuous capture mode needed a change in program structure. The camera app was structured as ```python while True: if shutter button was just pressed: capture a jpeg frame else: update the viewfinder ``` However, "capture a jpeg frame" needs to (A) switch the camera settings and (B) capture into a different, larger buffer then (C) return to the earlier settings. This can't be done during continuous capture mode. So just restructuring it as follows isn't going to work: ```python with camera.continuous_capture(buffer1, buffer2) as capture: for frame in capture: if shutter button was just pressed: capture a jpeg frame, without disturbing continuous capture mode else: update the viewfinder ``` The continuous mode is only implemented in the espressif port; others will throw an exception if the associated methods are invoked. It's not impossible to implement there, just not a priority, since these micros don't have enough RAM for two framebuffer copies at any resonable sizes. The capture code, including single-shot capture, now take mp_obj_t in the common-hal layer, instead of a buffer & length. This was done for the continuous capture mode because it has to identify & return to the user the proper Python object representing the original buffer. In the Espressif port, it was convenient to implement single capture in terms of a multi-capture, which is why I changed the singleshot routine's signature too.
2021-10-27 17:10:20 -04:00
#: shared-module/imagecapture/ParallelImageCapture.c
msgid "This microcontroller does not support continuous capture."
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-module/paralleldisplaybus/ParallelBus.c
Stub out the non-sequential parallel bus constructor .. most boards can't support non-sequential pins, so share the implementation of the error routine so we get an identical message.
2021-09-21 16:00:43 -04:00
msgid ""
"This microcontroller only supports data0=, not data_pins=, because it "
"requires contiguous pins."
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr ""
Update translations
2019-08-22 15:59:17 -04:00
#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
Update translations
2019-07-19 13:38:59 -04:00
msgid "Tile index out of bounds"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""
make translate
2020-11-27 23:57:59 -05:00
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Adapter.c
locale: regenerate translations for new bleio msg There is now an adapter timeout message. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 03:01:38 -04:00
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "Too many channels in sample"
msgstr ""
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Too many channels in sample."
msgstr ""
make translate
2020-04-14 19:25:21 -04:00
#: shared-module/displayio/__init__.c
Fix typo, oopsie
2023-07-29 09:10:09 -04:00
msgid "Too many display busses; forgot displayio.release_displays() ?"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
make translate
2020-04-14 19:25:21 -04:00
#: shared-module/displayio/__init__.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "Too many displays"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
add PacketBuffer .incoming_ and .outgoing_packet_length
2020-05-04 14:29:37 -04:00
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
Allow setting max_packet_size for PacketBuffer This is handy for remote characteristics because it allows for the PacketBuffer binding code to have the correct max size. This PR also adds checks so we don't write outside the outgoing buffer.
2021-04-14 20:09:48 -04:00
msgid "Total data to write is larger than %q"
add PacketBuffer .incoming_ and .outgoing_packet_length
2020-05-04 14:29:37 -04:00
msgstr ""
Setup outline for SAMD alarm module
2021-07-23 14:09:28 -04:00
#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
Implement RP2040 Alarm module Adds light and deep sleep functionality for the TimeAlarm and PinAlarm alarm categories. Adds board deinit for all platforms.
2021-04-26 17:52:49 -04:00
#: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
#: ports/stm/common-hal/alarm/touch/TouchAlarm.c
msgid "Touch alarms not available"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/busio/UART.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
msgid "UART de-init"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
Shrink by combining error messages
2023-05-18 19:24:37 -04:00
#: ports/cxd56/common-hal/busio/UART.c ports/espressif/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
msgid "UART init"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
tweak the UART in use message on RP2040
2023-02-17 17:29:44 -05:00
#: ports/raspberrypi/common-hal/busio/UART.c
msgid "UART peripheral in use"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/busio/UART.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
msgid "UART re-init"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
#: ports/stm/common-hal/busio/UART.c
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
msgid "UART write"
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
msgstr ""
save about 112 bytes
2022-10-09 19:22:39 -04:00
#: main.c
msgid "UID:"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-module/usb_hid/Device.c
`make translate`
2021-05-10 19:57:38 -04:00
msgid "USB busy"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
address review comments
2021-05-05 12:35:12 -04:00
#: supervisor/shared/safe_mode.c
msgid "USB devices need more endpoints than are available."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "USB devices specify too many interface names."
msgstr ""
`make translate`
2021-05-10 19:57:38 -04:00
#: shared-module/usb_hid/Device.c
msgid "USB error"
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/UUID.c
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
msgid "UUID integer value must be 0-0xffff"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/UUID.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/UUID.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "UUID value is not str, int or byte buffer"
msgstr ""
review update, add RP2040 example
2023-09-06 22:59:40 -04:00
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
msgid "Unable to access unaligned IO register"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
Translations
2021-02-09 18:47:54 -05:00
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Unable to allocate buffers for signed conversion"
msgstr ""
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
#: supervisor/shared/safe_mode.c
Switch all ports to auto-growing split heap This simplifies allocating outside of the VM because the VM doesn't take up all remaining memory by default. On ESP we delegate to the IDF for allocations. For all other ports, we use TLSF to manage an outer "port" heap. The IDF uses TLSF internally and we use their fork for the other ports. This also removes the dynamic C stack sizing. It wasn't often used and is not possible with a fixed outer heap. Fixes #8512. Fixes #7334.
2023-10-02 19:49:31 -04:00
msgid "Unable to allocate to the heap."
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/busio/I2C.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "Unable to create lock"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-module/i2cdisplaybus/I2CDisplayBus.c
#: shared-module/is31fl3741/IS31FL3741.c
Update translations
2019-07-17 15:00:58 -04:00
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr ""
#: py/parse.c
msgid "Unable to init parser"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr ""
Add mdns module This allows for CircuitPython to resolve a .local domain and find other devices with MDNS services. First step for #6174
2022-02-03 10:42:48 -05:00
#: ports/espressif/common-hal/mdns/Server.c
Add MDNS support to Pico W This adds both cpy-MAC.local and circuitpython.local support. Fixes #7214
2022-11-22 20:10:54 -05:00
#: ports/raspberrypi/common-hal/mdns/Server.c
Add mdns module This allows for CircuitPython to resolve a .local domain and find other devices with MDNS services. First step for #6174
2022-02-03 10:42:48 -05:00
msgid "Unable to start mDNS query"
msgstr ""
Reset translations to master
2019-03-27 23:47:58 -04:00
#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr ""
8334: RP2040 lacks raw memory map access
2023-08-31 23:25:20 -04:00
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
msgid "Unable to write to read-only memory"
msgstr ""
make translate
2020-12-14 11:49:01 -05:00
#: shared-bindings/alarm/SleepMemory.c
msgid "Unable to write to sleep_memory."
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/UUID.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Unexpected nrfx uuid type"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/ssl/SSLSocket.c
Update make translate script
2020-09-29 01:44:30 -04:00
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr ""
Add S3 GATT client support This allows you to connect to GATT services on the other device. It also adds connection initiation (GAP central). More progress on #5926
2022-02-10 14:31:57 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error at %s:%d: %d"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error: %d"
msgstr ""
fix typos (partial) detected by codepell
2023-03-18 11:17:02 -04:00
#: ports/raspberrypi/common-hal/wifi/__init__.c
#, c-format
msgid "Unknown error code %d"
msgstr ""
Update translations
2020-08-25 19:40:45 -04:00
#: shared-bindings/wifi/Radio.c
Update translations
2021-01-14 18:53:37 -05:00
#, c-format
msgid "Unknown failure %d"
Update translations
2020-08-25 19:40:45 -04:00
msgstr ""
Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.
2019-11-20 16:53:50 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 16:56:11 -04:00
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
make translate and remove backslash-r's
2019-12-12 14:51:50 -05:00
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""
Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.
2019-11-20 16:53:50 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error at %s:%d: %d"
msgstr ""
Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.
2019-11-20 16:53:50 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
Ran make translate
2021-04-02 15:34:16 -04:00
msgid "Unknown system firmware error: %04x"
Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.
2019-11-20 16:53:50 -05:00
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %d"
msgstr ""
Fix crash when UART construct fails After the script stops with the exception thrown the final gc_sweep will call any finalizers and they usually call deinit. deinit on invalid objects can wreak havoc by changing random memory or (hopefully) crashing. This fixes ensures the object is deinited until initialization succeeds and the object is valid. Do the same fix for I2C and SPI too. Fixes #4700 and fixes #5005
2021-07-20 20:08:22 -04:00
#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
update translations
2022-12-08 15:12:59 -05:00
#: shared-module/_pixelmap/PixelMap.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""
Update translations
2019-11-21 19:50:34 -05:00
#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""
bitmaptools: add alphablend This blends two "565"-format bitmaps, including byteswapped ones. All the bitmaps have to have the same memory format. The routine takes about 63ms on a Kaluga when operating on 320x240 bitmaps. Of course, displaying the bitmap also takes time. There's untested code for the L8 (8-bit greyscale) case. This can be enabled once gifio is merged.
2021-11-03 09:35:50 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "Unsupported colorspace"
msgstr ""
Add `warnings` and warn about displayio changes Follow up to #8493
2023-10-25 18:36:23 -04:00
#: shared-module/displayio/bus_core.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "Unsupported display bus type"
msgstr ""
make translate
2019-07-25 22:13:50 -04:00
#: shared-module/audiocore/WaveFile.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "Unsupported format"
msgstr ""
WIP websocket accept and hashlib
2022-06-29 19:31:55 -04:00
#: shared-bindings/hashlib/__init__.c
msgid "Unsupported hash algorithm"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/dualbank/__init__.c
make translate again
2020-12-23 22:52:27 -05:00
msgid "Update Failed"
msgstr ""
Add S3 GATT client support This allows you to connect to GATT services on the other device. It also adds connection initiation (GAP central). More progress on #5926
2022-02-10 14:31:57 -05:00
#: ports/espressif/common-hal/_bleio/Characteristic.c
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Descriptor.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Value length != required fixed length"
msgstr ""
Add S3 GATT client support This allows you to connect to GATT services on the other device. It also adds connection initiation (GAP central). More progress on #5926
2022-02-10 14:31:57 -05:00
#: ports/espressif/common-hal/_bleio/Characteristic.c
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Descriptor.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "Value length > max_length"
msgstr ""
use esp error for espnow
2023-02-03 05:12:44 -05:00
#: ports/espressif/common-hal/espidf/__init__.c
make translate
2020-12-29 17:31:29 -05:00
msgid "Version was invalid"
msgstr ""
Translations: follow stm port rename, run 'make translate'
2020-03-17 17:41:09 -04:00
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: main.c
Removed old supervisor stack setting code and revert some 'optimisations'
2023-02-16 06:33:37 -05:00
msgid "WARNING: Your code filename has two extensions\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
merge from main
2020-11-19 00:29:14 -05:00
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
locale: generate strings for watchdog timer Run `make translate` to generate strings for `shared-bindings/watchdog`. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-26 23:38:38 -04:00
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
Update help() to have circuitpython.org
2021-10-21 18:07:07 -04:00
"Visit circuitpython.org for more information.\n"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
"\n"
Update help() to have circuitpython.org
2021-10-21 18:07:07 -04:00
"To list built-in modules type `help(\"modules\")`.\n"
make translate and fix sphinx issues
2019-08-15 21:54:52 -04:00
msgstr ""
Wi-Fi autoconnect and title bar status This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD in `/.env`. When both are defined, CircuitPython will attempt to connect to the network even when user code isn't running. If the user code attempts to a network with the same SSID, it will return immediately. Connecting to another SSID will disconnect from the auto-connected network. If the user code initiates the connection, then it will be shutdown after user code exits. (Should match <8 behavior.) This PR also reworks the default displayio terminal. It now supports a title bar TileGrid in addition to the (newly renamed) scroll area. The default title bar is the top row of the display and is positioned to the right of the Blinka logo when it is enabled. The scroll area is now below the Blinka logo. The Wi-Fi auto-connect code now uses the title bar to show its state including the IP address when connected. It does this through the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s> is the title bar string. This is commonly supported by terminals so it should work over USB and UART as well. Related to #6174
2022-06-06 19:54:02 -04:00
#: supervisor/shared/web_workflow/web_workflow.c
msgid "Wi-Fi: "
msgstr ""
Error msg changes
2022-11-21 18:00:34 -05:00
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Wifi is not enabled"
msgstr ""
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
#: main.c
msgid "Woken up by alarm.\n"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
Update translations
2020-01-07 17:31:58 -05:00
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "You pressed both buttons at start up."
msgstr ""
#: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
#: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
#: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
Unify some error strings
2023-07-20 14:16:31 -04:00
#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
Implement safemode.py
2023-02-11 23:50:20 -05:00
msgid "You pressed button A at start up."
msgstr ""
fix: Apply pre-commit patch
2023-08-18 06:22:26 -04:00
#: ports/espressif/boards/m5stack_m5paper/mpconfigboard.h
msgid "You pressed button DOWN at start up."
msgstr ""
locale: update with 'make translate'
2019-08-18 22:30:31 -04:00
#: supervisor/shared/safe_mode.c
shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0
2023-02-13 21:29:57 -05:00
msgid "You pressed the BOOT button at start up"
Implement safemode.py
2023-02-11 23:50:20 -05:00
msgstr ""
Add Adafruit HUZZAH32 breakout
2023-02-20 20:04:22 -05:00
#: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
msgid "You pressed the GPIO0 button at start up."
msgstr ""
Add ESP32-LyraT board
2023-02-21 15:43:12 -05:00
#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
msgid "You pressed the Rec button at start up."
msgstr ""
Implement safemode.py
2023-02-11 23:50:20 -05:00
#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
msgid "You pressed the SW38 button at start up."
msgstr ""
#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
msgid "You pressed the VOLUME button at start up."
msgstr ""
#: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
msgid "You pressed the central button at start up."
msgstr ""
#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
msgid "You pressed the left button at start up."
Fix endpoint checking; Clean up safe mode printing.
2021-05-12 15:53:52 -04:00
msgstr ""
#: supervisor/shared/safe_mode.c
Implement safemode.py
2023-02-11 23:50:20 -05:00
msgid "You pressed the reset button during boot."
make translate and fix sphinx issues
2019-08-15 21:54:52 -04:00
msgstr ""
Improve boot_out.txt truncation * write any partial message * instead of "..." show a sensible (translatable) message This does slightly lower the amount of data that can be printed, and makes the exact amount dependent on the language. However, if boot.py intentionally needs to produce larger amounts of output, it can deliberately mount the filesystem in RW mode and perform any writes needed. In that case it's up to the boot.py to choose an appropriate way to limit the number of writes if needed for the application.
2023-02-14 11:46:20 -05:00
#: supervisor/shared/micropython.c
msgid "[truncated due to length]"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c
msgid "__init__() should return None"
msgstr ""
#: py/objtype.c
update translations
2023-09-20 12:08:50 -04:00
#, c-format
msgid "__init__() should return None, not '%s'"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modbinascii.c extmod/modhashlib.c py/objarray.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "a bytes-like object is required"
msgstr ""
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:06:18 -04:00
#: shared-bindings/i2ctarget/I2CTarget.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "addresses is empty"
msgstr ""
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
#: py/compile.c
msgid "annotation must be an identifier"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/create.c
msgid "arange: cannot compute length"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/objobject.c
msgid "arg must be user-type"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
Add supervisor.set_next_code() function (prototype). Part of #1084.
2020-10-29 11:39:06 -04:00
#: py/runtime.c shared-bindings/supervisor/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "argument has wrong type"
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/compile.c
msgid "argument name reused"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/argcheck.c shared-bindings/_stage/__init__.c
add atexit module
2021-07-29 23:06:24 -04:00
#: shared-bindings/digitalio/DigitalInOut.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "argument num/types mismatch"
msgstr ""
#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "array has too many dimensions"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array is too big"
msgstr ""
make translate
2020-12-14 11:49:01 -05:00
#: py/objarray.c shared-bindings/alarm/SleepMemory.c
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "array/bytes required on right side"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/asmxtensa.c
msgid "asm overflow"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/compile.c
msgid "async for/with outside async function"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
update translations
2023-09-20 12:08:50 -04:00
msgid "attributes not supported"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ulab_tools.c
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "axis too long"
msgstr ""
code format and translations
2021-08-13 11:13:38 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "background value out of range of target"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinevex.c
msgid "bad compile mode"
msgstr ""
#: py/objstr.c
msgid "bad conversion specifier"
msgstr ""
#: py/objstr.c
msgid "bad format string"
msgstr ""
make translate
2020-09-12 16:11:02 -04:00
#: py/binary.c py/objarray.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "bad typecode"
msgstr ""
#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr ""
bitmaptools: add dither This can convert a BGR565_SWAPPED bitmap to B&W in about 82ms on esp32-s2.
2021-10-29 15:01:47 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "bitmap sizes must match"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modrandom.c
Merge tag 'v1.16'
2021-06-18 11:54:19 -04:00
msgid "bits must be 32 or less"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-bindings/audiomixer/Mixer.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "bits_per_sample must be 8 or 16"
msgstr ""
#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer is smaller than requested size"
msgstr ""
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer size must be a multiple of element size"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""
consolidate and shorten some error messages
2023-08-19 12:14:58 -04:00
#: py/modstruct.c shared-module/struct/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "buffer too small"
msgstr ""
Separate Socket and SSLSocket, add LWIP connect
2021-01-15 12:01:15 -05:00
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
Updated translation
2020-10-16 15:21:00 -04:00
msgid "buffer too small for requested bytes"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/emitbc.c
msgid "bytecode overflow"
msgstr ""
make translate
2020-09-12 16:11:02 -04:00
#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "bytes value out of range"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: ports/atmel-samd/bindings/samd/Clock.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "calibration is out of range"
msgstr ""
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr ""
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
#: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c
vectorio: Add width and height properties to rectangle Closes: https://github.com/adafruit/circuitpython/issues/5695
2021-12-12 22:50:00 -05:00
#: shared-module/vectorio/Rectangle.c
message consolidation and more use of validators
2022-05-13 15:33:43 -04:00
msgid "can only have one parent"
vectorio: Add width and height properties to rectangle Closes: https://github.com/adafruit/circuitpython/issues/5695
2021-12-12 22:50:00 -05:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr ""
#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "can only specify one unknown dimension"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""
#: py/compile.c
msgid "can't assign to expression"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modasyncio.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "can't cancel self"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: shared-module/adafruit_pixelbuf/PixelBuf.c
make translate
2020-08-04 14:58:43 -04:00
msgid "can't convert %q to %q"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/obj.c
#, c-format
msgid "can't convert %s to float"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: py/runtime.c
#, c-format
msgid "can't convert %s to int"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objint.c
msgid "can't convert NaN to int"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/vector.c
msgid "can't convert complex to float"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objint.c
msgid "can't convert inf to int"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
pre-commit fixes
2023-08-14 00:47:22 -04:00
msgid "can't convert to complex"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/obj.c
pre-commit fixes
2023-08-14 00:47:22 -04:00
msgid "can't convert to float"
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgstr ""
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
#: py/runtime.c
msgid "can't convert to int"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr ""
#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr ""
#: py/compile.c
msgid "can't delete expression"
msgstr ""
#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/runtime.c
msgid "can't import name %q"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitnative.c
msgid "can't load from '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr ""
Merge tag 'v1.18' Boosted performance, board.json metadata, more mimxrt, rp2, samd features This release of MicroPython sees a boost to the overall performance of the VM and runtime. This is achieved by the addition of an optional cache to speed up general hash table lookups, as well as a fast path in the VM for the LOAD_ATTR opcode on instance types. The new configuration options are MICROPY_OPT_MAP_LOOKUP_CACHE and MICROPY_OPT_LOAD_ATTR_FAST_PATH. As part of this improvement the MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE option has been removed, which provided a similar map caching mechanism but with the cache stored in the bytecode, which made it not useful on bare metal ports. The new mechanism is measured to be at least as good as the old one, applies to more map lookups, has a constant RAM overhead, and applies to native code as well as bytecode. These performance options are enabled on the esp32, mimxrt, rp2, stm32 and unix ports. For esp32 and mimxrt some code is also moved to RAM to further boost performance. On stm32, performance increases by about 20% for benchmarks that are heavy on name lookups, like misc_pystone.py and misc_raytrace.py. On esp32 performance can increase by 2-3x, and on mimxrt it is up to 6x. All boards in all ports now have a board.json metadata file, which is used to automatically build firmware and generate a webpage for that board (among other possibilities). Auto-build scripts have been added for this purpose and they build all esp32, mimxrt, rp2, samd and stm32 boards. The generated output is available at https://micropython.org/download. Support for FROZEN_DIR and FROZEN_MPY_DIR has been deprecated for some time and was finally removed in this release. Instead of these, FROZEN_MANIFEST can be used. The io.resource_stream() function is also removed, replaced by the pure Python version in micropython-lib. The search order for importing frozen Python modules is now controlled by the ".frozen" entry in sys.path. This string is added by default in the second position in sys.path. User code should adjust sys.path depending on the desired behaviour. Putting ".frozen" first in sys.path will speed up importing frozen modules. A bug in multiple precision integers with bitwise of -0 was fixed in commit 2c139bbf4e5724ab253b5b034ce925e04267a9c4. The platform module has been added to allow querying the compiler and underlying SDK/HAL/libc version. This is enabled on esp32, mimxrt and stm32 ports. The mpremote tool now supports seek, flush, mkdir and rmdir on PC-mounted filesystems. And a help command has been added. The documentation has seen many additions and improvements thanks (for a second time) to the Google Season of Docs project. The rp2 documentation now includes a reference for PIO assembly instructions, a PIO quick reference and a PIO tutorial. The random and stm modules have been documented, along with sys.settrace, manifest.py files and mpremote. There is also now more detail about the differences between MicroPython and standard Python 3.5 and above. The esp32 port sees support for ESP32-S3 SoCs, and new boards GENERIC_S3, ESP32_S2_WROVER, LOLIN_S2_MINI, LOLIN_S2_PICO and UM_FEATHERS2NEO. The PWM driver has been improved and now supports all PWM timers and channels, and the duty_u16() and duty_ns() methods, and it keeps the duty constant when changing frequency. The machine.bitstream() function has been improved to use RMT, with an option to select the original bit-banging implementation. The mimxrt port gained new hardware features: SDRAM and SD card support, as well as network integration with a LAN driver. The machine.WDT class was added along with the machine.reset_cause(), machine.soft_reset(), machine.unique_id() add machine.bitstream() functions. DHT sensor support was added, and f-strings were enabled. The rp2 port now has support for networking, and bluetooth using NimBLE. The Nina-W10 WiFi/BT driver is fully integrated and supported by the new Arduino Nano RP2040 connect board. I2S protocol support is added along with a machine.bitstream() driver and DHT sensor support. The PWM driver had a bug fix with the accuracy of setting/getting the frequency, and the duty value is now retained when changing the frequency. On the samd port there is now support for the internal flash being a block device, and for filesystems and the os module. Pin and LED classes have been implemented. There are more time functions, more Python features enabled, and the help() function is added. SEEED_WIO_TERMINAL and SEEED_XIAO board definitions are now available. The stm32 port now has support for F427, F479 and H7A3(Q)/H7B3(Q) MCUs, and new board definitions for VCC_GND_H743VI, OLIMEX_H407, MIKROE_QUAIL, GARATRONIC_PYBSTICK26_F411, STM32H73B3I_DK. A bug was fixed in the SPI driver where a SPI transfer could fail if the CYW43 WiFi driver was also active at the same time. On the windows port the help() function has been enabled, and support for build variants added, to match the unix port. The zephyr port upgraded Zephyr to v2.7.0. The change in code size since the previous release for various ports is (absolute and percentage change in the text section): bare-arm: -1520 -2.605% minimal x86: -2256 -1.531% unix x64: -457 -0.089% unix nanbox: -925 -0.204% stm32: +312 +0.079% PYBV10 cc3200: -176 -0.096% esp8266: +532 +0.076% GENERIC esp32: +27096 +1.820% GENERIC nrf: -212 -0.121% pca10040 rp2: +9904 +2.051% PICO samd: +35332 +33.969% ADAFRUIT_ITSYBITSY_M4_EXPRESS The changes that dominate these numbers are: - bare-arm, minimal: use of new MICROPY_CONFIG_ROM_LEVEL_MINIMUM option and subsequent disabling of remaining optional features - unix, cc3200, nrf: general code size reductions of the core - stm32: performance improvements, addition of platform module - esp8266: enabling f-strings - esp32: use of -O2 instead of -Os - rp2: machine.I2S and other new hardware features - samd: filesystem support and other new hardware features Thanks to everyone who contributed to this release: Alan Dragomirecký, Alexey Shvetsov, Andrew Leech, Andrew Scheller, Antoine Aubert, Boris Vinogradov, Chris Boudacoff, Chris Fiege, Christian Decker, Damien George, Daniel Gorny, Dave Hylands, David Michieli, Emilie Feral, Frédéric Pierson, gibbonsc, Henk Vergonet, iabdalkader, Ihor Nehrutsa, Jan Hrudka, Jan Staal, jc_.kim, Jim Mussared, Jonathan Hogg, Laurens Valk, leo chung, Lorenzo Cappelletti, Magnus von Wachenfeldt, Matt Trentini, Matt van de Werken, Maureen Helm, Michael Bentley, Michael Buesch, Mike Causer, Mike Teachman, Mike Wadsten, Ned Konz, NitiKaur, oli, patrick, Patrick Van Oosterwijck, Peter Boin, Peter Hinch, Peter van der Burg, Philipp Ebensberger, Pooya Moradi, retsyo, robert-hh, roland van straten, Scott Armitage, Sebastian Wicki, Seon Rozenblum, Sergei Silnov, Simon Baatz, Stewart Bonnick, stijn, Tobias Thyrrestrup, Tomas Vanek, YoungJoon Chun. What follows is a detailed list of changes, generated from the git commit history, and organised into sections. Main components =============== all: - remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE - update Python formatting to latest Black version 21.12b0 - remove support for FROZEN_DIR and FROZEN_MPY_DIR py core: - parse: simplify parse nodes representing a list - emitnative: ensure load_subscr does not clobber existing REG_RET - mpconfig.h: define initial templates for "feature levels" - vm: add a fast path for LOAD_ATTR on instance types - map: add an optional cache of (map+index) to speed up map lookups - builtinimport: forward all debug printing to MICROPY_DEBUG_PRINTER - add wrapper macros so hot VM functions can go in fast code location - runtime: fix crash when exc __new__ doesn't return an exc instance - mpconfig.h: define the "extra" feature level - mpconfig.h: revert MICROPY_REPL_INFO to disabled at all levels - gc: add hook to run code during time consuming GC operations - showbc: print unary-op string when dumping bytecode - modsys: replace non-ASCII quote char with ASCII char - runtime: allow types to use both .attr and .locals_dict - lexer: support nested [] and {} characters within f-string params - objfun.h: remove obsolete comments about entries in extra_args - builtinimport: refactor module importing - showbc: fix printing of raw bytecode header on nanbox builds - modio: remove io.resource_stream function - only search frozen modules when '.frozen' is found in sys.path - mkrules.cmake: set frozen preprocessor defs early - runtime: allow initialising sys.path/argv with defaults - mpstate.h: only include sys.path/argv objects in state when enabled - mpz: fix bugs with bitwise of -0 by ensuring all 0's are positive - qstr: reset mpstate.qstr_last_chunk before raising an error - modbuiltins: add additional macro for extending builtins - mpconfig.h: define MICROPY_PY_USSL_FINALISER only if not defined extmod: - machine_i2c: make SoftI2C configurable via macro option - machine_spi: make SoftSPI configurable via macro option - modonewire: make _onewire module configurable via macro option - machine_pwm: factor out machine.PWM bindings to common code - move modnetwork and modusocket from stm32 to extmod - modnetwork: add STA_IF and AP_IF constants - modnetwork: add extended socket state - modusocket: add read/write stream methods to socket object - modnetwork: define network interfaces in port config files - network_cyw43: make consistent use of STA and AP constants - modnetwork: remove STM32 references - modnetwork: remove modnetwork socket u_state member - mpbthci.h: add mp_bluetooth_hci_uart_any prototype - nimble: add nimble CMake fragment file - add platform module - moduplatform: improve implementation for PC ports - vfs_posix_file: support MP_STREAM_POLL in vfs_posix_file_ioctl - modbluetooth: add connection interval to gap_connect - nimble: update to NimBLE v1.4 - nimble: remove workaround for OS_ENOMEM - uasyncio: fix gather returning exceptions from a cancelled task - uplatform: remove unused definitions - uplatform: use generic custom platform string - network_ninaw10: fix scan list order to match other NICs - modbluetooth: support gap_connect(None) to cancel a connection - modure: redirect regex debug printing to mp_printf - network_ninaw10: fix config of AP mode - network_ninaw10: disable active connections before connecting - network_ninaw10: make NIC state persistent - network_ninaw10: return -1 on timeout from recv/send - network_ninaw10: make recv/recvfrom interchangeable - moduplatform: detect xtensa arch - modusocket: allow setting timeout on unbound sockets - modusocket: initialise accepted socket state - network_ninaw10: use socket timeout preset in modusocket - modbluetooth: fix conditional compilation of ringbuf_put_uuid - modbluetooth: put declaration of connect_cancel in correct place shared: - libc/string0: don't include string.h, and provide __memcpy_chk - runtime/pyexec: cleanup EXEC_FLAG flag constants drivers: - ninaw10: add ublox Nina-W10 WiFi/BT module driver - lsm6dsox: add LSM6DSOX driver and examples - neopixel: avoid heap alloc in fill() - ninaw10: fix BSSID byte order, and add null byte to ESSID - ninaw10/nina_wifi_drv: fix DNS resolution mpy-cross: no changes specific to this component/port lib: - mynewt-nimble: switch to the MicroPython fork of NimBLE - asf4: point submodule to latest commit on circuitpython branch - update pico-sdk to 1.3.0 and tinyusb to 0.12.0 - stm32lib: update library for L4 v1.17.0, new G4, WL, and MMC fixes - stm32lib: update library for fix to F7 USB HS Support components ================== docs: - library/os.rst: clarify littlefs requirements for block erase - library/bluetooth.rst: update incorrect link to gatts_write - make.bat: change Windows output dir from '_build' to 'build' - library/machine.I2S.rst: specify that I2S.shift args are kw-only - esp32: explain ESP32 PWM modes, timers, and channels - rp2: add reference for PIO assembly instructions, and PIO tutorial - library/random.rst: document the random module - reference/mpremote.rst: add docs for mpremote - reference/manifest.rst: add docs for manifest.py files - library/stm.rst: document the stm module - esp32/tutorial: add an example of peripheral control via regs - rp2/general.rst: fix typo with missing spaces - library/framebuf.rst: adjust dimensions in example - library/rp2.rst: update function asm_pio_encode to add sideset_opt - reference/filesystem.rst: add detail on how to use littlefs fuse - rp2/quickref.rst: add section on PIO - library/sys.rst: add docs for sys.settrace - esp8266/tutorial: fix comments of FrameBuffer examples - library/uasyncio.rst: detail exception behaviour in cancel/timeout - library/machine.Timer.rst: document 'id' as positional-only arg - library/machine.SPI.rst: add example SPI usage - library/machine.Timer.rst: document `period` and `callback` args - library/machine.Pin.rst: add Pin.ANALOG mode constant - remove trailing spaces and convert tabs to spaces - library/sys.rst: add note about '.frozen' as an entry in sys.path - differences: document details of new PEPs/features in Python 3.5+ - update copyright year range to include 2022 - esp32: update RMT quickref example to match latest code examples: no changes specific to this component/port tests: - perf_bench: use math.log instead of math.log2 - basics: add tests for type-checking subclassed exc instances - micropython/const.py: add comment about required config for test - cpydiff: clarify f-string diffs regarding concatenation - basics/int_big_cmp.py: add more tests for big-int comparison - extmod: skip uselect_poll_udp when poll() is not available tools: - autobuild: add auto build for GENERIC_C3_USB - ci.sh: use IDF v4.4 as part of esp32 CI and build GENERIC_S3 - autobuild: add the MIMXRT1010_EVK board to autobuild - ci.sh: use a specific ESP IDF v4.4 commit - autobuild: add script to generate website board metadata - dfu.py: make tool work with python3 when parsing DFU files - autobuild: automatically build all mimxrt, rp2 and samd boards - autobuild: automatically build all stm32 boards - mpremote: implement seek and flush in ioctl method - autobuild: automatically build all esp32 boards - upip.py: support == to specify exact package version - makemanifest.py: make str conversion compatible with Python 2 - makemanifest.py: merge make-frozen.py - mpremote: add mkdir and rmdir to RemoteFS - mpremote: add help command - mpremote: add link to mpremote docs URL in help message - upip.py: skip '.frozen' entry in sys.path for install path - autobuild: build esp8266 OTA image with GENERIC_1M board - ci.sh: upgrade Zephyr docker image to v0.21.0 - ci.sh: build zephyr nucleo_wb55rg to test zephyr bluetooth build CI: - workflows: use Python 3.8 for macos workflow - workflows: add new workflow to build ports download metadata The ports ========= all ports: - add board.json for all boards - add images, features and urls to board.json - add '.frozen' as the first entry in sys.path - move '.frozen' to second entry in sys.path bare-arm port: - mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM - mpconfigport.h: disable remaining optional features cc3200 port: no changes specific to this component/port esp8266 port: - boards/GENERIC: enable f-strings - extract qstr from object when comparing keys in config() - etshal.h: remove unneeded function declarations - allow building a board to any dest directory esp32 port: - boards: add new FeatherS2-Neo board definition - machine_timer: use tx_update member for IDF 4.4 and above - add support for ESP32-S3 SoCs - boards: add new GENERIC_S3 board definition - machine_hw_spi: fix hardware SPI DMA channels for S2/S3 - boards: add board definition for ESP32-S2-WROVER module - boards: add LOLIN_S2_MINI ESP32-S2 board - machine_pwm: add support for all PWM timers and channels - README: updated readme with req IDF vers for ESP32-S2, C3 and S3 - usb: add USB host connection detection for CDC serial output - machine_pin: block out IO16 and IO17 when using SPIRAM on ESP32 - mpthreadport: fix TCB cleanup function so thread_mutex is ready - main: add option for a board to hook code into startup sequence - split out WLAN code from modnetwork.c to network_wlan.c - enable optimisations and move code to iRAM to boost performance - usb: improve speed of USB CDC output - add specific deploy_s2.md instructions for esp32-s2 - boards/LOLIN_S2_MINI: add image to board.json - boards: update board and deploy metadata for UM_xxx boards - usb: further improve speed of USB CDC output - boards/LOLIN_S2_PICO: add LOLIN_S2_PICO board definition files - boards/ESP32_S2_WROVER: link to specific deploy_s2 instructions - support building with latest IDF v5 - in machine_i2s, send null samples in underflow situations - in machine_i2s, make object reference arrays root pointers - add SDCard support for S3, and a GENERIC_S3_SPIRAM board - boards/GENERIC_S3: enable BLE on ESP32 S3 - machine_pwm: implement duty_u16() and duty_ns() PWM methods - extract qstr from object when comparing keys in config() - machine_pin: make GPIO 26 usable for S2,S3 if SPIRAM not config'd - machine_hw_spi: fix SPI default pins reordering on ESP32-S2/S3 - machine_hw_spi: set proper default SPI(id=1) pins on S2,S3 and C3 - machine_hw_spi: set proper default SPI(id=2) pins on S2 and S3 - boards: remove SPI pin defaults from GENERIC S2/S3 boards - modnetwork: synchronize WiFi AUTH_xxx constants with IDF values - machine_pwm: keep duty constant when changing frequency - machine_bitstream: replace bit-bang code with RMT-based driver - machine_i2s: add support for ESP-IDF 4.4 - machine_bitstream: fix signal duplication on output pins - esp32: enable platform module with IDF version - boards/GENERIC_D2WD: build with -Os optimisation - esp32_rmt: install RMT driver on core 1 - machine_bitstream: reinstate bitstream bit-bang implementation javascript port: no changes specific to this component/port mimxrt port: - sdcard: implement SDCard driver - machine_bitstream: add bitstream function to machine module - rework flash configuration - sdram: add SDRAM support - eth: add LAN support and integrate the network module - modmachine: implement machine.WDT() and machine.reset_cause() - boards: fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK - hal: remove duplicate definitions from flexspi_hyper_flash.h - dma_channel: fix the DMA channel management - fix cycle counter for time.ticks_cpu() and machine.bitstream() - add dht_readinto() to the mimxrt module, and freeze dht.py - extend the help() message and README.md - mpconfigport.h: enable f-strings - modmachine: implement soft_reset() and unique_id() functions - boards/make-pins.py: allow empty lines and comments in pins.csv - optimize the runtime speed - enable the platform module - boards: add the Seeed ARCH MIX board - boards: update the board.json files and add deploy_xx.md files - fix mp_hal_quiet_timing_enter()/exit() so timer still runs - support PWM using the FLEXPWM and QTMR modules - define UART 0 on MIMXRT boards - support selection of PHY type and address - re-enable eth checksum creation by HW - fix a tiny unnoticed bug in sdcard.c - add a driver for the DP83848 PHY device - refactor the reading of the machine id - enable ticks_cpu at boot time for NDEBUG builds only - use -Og instead of -O0 for DEBUG builds - tidy up the board flash related files - hal: allow readSampleClkSrc to be configured by a board - enable MICROPY_PY_USSL_FINALISER minimal port: - mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM - Makefile: don't force a 32-bit build - mpconfigport.h: disable features that are not needed nrf port: - Makefile: improve Black Magic Probe commands - main: use VFS helper function to mount fs and chdir pic16bit port: no changes specific to this component/port powerpc port: no changes specific to this component/port qemu-arm port: no changes specific to this component/port rp2 port: - mpconfigport.h: enable heapq module - add support for bluetooth module using NimBLE - add framework for networking - mpconfigport.h: use the "extra" feature level - enable optimisations (comp goto, map cache, fast attr) - machine_i2s: add I2S protocol support - add support for Nina-W10 WiFi/BT module - boards: add support for Arduino Nano RP2040 - machine_bitstream: implement the machine.bitstream driver - boards: add neopixel.py to manifest.py - rp2_pio: support exec with sideset - boards/PIMORONI_PICOLIPO_16MB: fix 16MB flash size - boards: add PYBSTICK26 RP2040 board definition - machine_uart: handle and clear UART RX timeout IRQ - boards/ARDUINO_NANO_RP2040_CONNECT: set default I2C pins - machine_pwm: fix PWM frequency setting - machine_pwm: keep duty value when changing the frequency - add support for DHT11 and DHT22 sensors - CMakeLists.txt: allow a board to override PICO_BOARD - boards/GARATRONIC_PYBSTICK26_RP2040: use correct pico-sdk board cfg samd port: - integrate latest asf4, add help, more time funcs and uPy features - samd_soc: allow a board to configure the low-level MCU config - add internal flash block device, filesystem and uos support - add Pin and LED classes, and machine.unique_id - boards/ADAFRUIT_FEATHER_M0_EXPRESS: update for flash and pins - boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: update for flash and pins - boards/MINISAM_M4: update for flash and pins - boards/ADAFRUIT_TRINKET_M0: update for flash and pins - boards/SAMD21_XPLAINED_PRO: update for flash and pins - boards/SEEED_WIO_TERMINAL: add new board definition - boards/SEEED_XIAO: add new board definition - README.md: update README to reflect new features and boards stm32 port: - pin: enable GPIO clock of pin if it's constructed without init - main: don't unconditionally enable GPIO A,B,C,D clocks - boards/VCC_GND_H743VI: add board definition for VCC_GND_H743VI - boards/OLIMEX_E407: add Ethernet RMII support - boards/LEGO_HUB_NO6: remove user paths from cc2564 init file - boards: remove trailing spaces, and add newline at end of file - add basic support for STM32H750 - add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn - suggest putting code in main.py not boot.py - boards/make-pins.py: allow a CPU pin to be hidden - boards/make-pins.py: allow empty lines and comments in pins.csv - dma: add functions for external users of DMA to enable clock - enable LOAD_ATTR fast path, and map lookup caching on >M0 - boards: add OLIMEX H407 board definition - enable platform module - extended flash filesystem space to 512K on H743 boards - boards/NUCLEO_H743ZI: enable VfsLfs2 on NUCLEO_H743ZI(2) boards - boards: add PF11-BOOT0 to stm32f091_af.csv - machine_i2c: use hardware I2C for STM32H7 - sdram: enforce gcc opt, and use volatile and DSB in sdram_test - usbd_cdc_interface: allow a board to hook into USBD CDC RX events - mpbthciport: allow a board to hook BT HCI poll functions - pendsv: allow a board to add entries for pendsv_schedule_dispatch - boards: add images to board.json for Adafruit and VCC_GND boards - uart: fix race conditions and clearing status in IRQ handler - mpconfigport.h: use the "extra" feature level - in machine_i2s, send null samples in underflow situations - in machine_i2s, make object reference arrays root pointers - led: support an extra 2 LEDs in board configuration - boards/MIKROE_CLICKER2_STM32: add more detail to board.json - boards: add new board MikroElektronika Quail, and F427 support - main: run optional frozen module at boot - sdio: don't explicitly disable DMA2 on deinit of SDIO - dma: make DMA2_Stream3 exclusive to SDIO when CYW43 enabled - boards: build NUCLEO_WB55 and STM32F769DISC without mboot enabled - boards: add PYBSTICK26 F411 board definition - boards/NADHAT_PYBF405: rename board to GARATRONIC_NADHAT_F405 - usb: use a table of allowed values to simplify usb_mode get/set - boards/NUCLEO_WB55: update rfcore_firmwre for new WS - flashbdev: support generic flash storage config via link symbols - boards: convert F413,F439,H743,L4xx,WB55 to new flash FS config - add support for F479 MCUs - include HAL MMC code in F4 builds - boards/make-pins.py: use cpu pins to define static alt-fun macros - boards/NUCLEO_WB55: fix LED ordering - boards/LEGO_HUB_NO6: set filesystem label as HUB_NO6 - boards: remove stray '+' characters at start of lines in ld files - boards: remove unused MICROPY_HW_ENABLE_TIMER config - boards: enable MICROPY_HW_ENABLE_SERVO on various boards - update L4 code to build with latest stm32lib and L4 HAL 1.17.0 - main: call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled - sdcard: support 8-bit wide SDIO bus - sdcard: add config option to force MM card capacity - factoryreset: init vfs flags before calling pyb_flash_init_vfs - qspi: fix typo in address comment - boards/make-pins.py: generate empty ADC table if needed - boards/OLIMEX_H407: fix typo in OLIMEX H407 board.json - network_wiznet5k: fix build error with wiznet5k and lwip enabled - enable MICROPY_PY_USSL_FINALISER teensy port: - switch to use manifest.py instead of FROZEN_DIR unix port: - enable LOAD_ATTR fast path, and map lookup caching - modusocket: support MP_STREAM_POLL in unix socket_ioctl - modos: add support for uos.urandom(n) - coverage: change remaining printf to mp_printf - Makefile: use -Og instead of -O0 for debug builds windows port: - README: remove unsupported Python instructions for Cygwin - mpconfigport.h: enable help and help("modules") - add support for build variants to windows port - run tests via Makefile - appveyor: build both standard and dev variants - appveyor: build mpy-cross only once for mingw-w64 - msvc: run qstr preprocessing phase in parallel zephyr port: - mphalport.h: remove unused and unimplemented C-level pin API - increase minimum CMake version to 3.20.0 - update include path to reboot.h - get UART console device from devicetree instead of Kconfig - use CONFIG_USB_DEVICE_STACK for conditional USB device support - upgrade to Zephyr v2.7.0 - modbluetooth_zephyr: provide dummy connect_cancel function
2022-02-15 13:36:26 -05:00
#: py/builtinimport.c
msgid "can't perform relative import"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "can't set 512 block size"
msgstr ""
Added safe mode button
2022-10-28 01:00:54 -04:00
#: py/objexcept.c py/objnamedtuple.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "can't set attribute"
msgstr ""
Switch all ports to auto-growing split heap This simplifies allocating outside of the VM because the VM doesn't take up all remaining memory by default. On ESP we delegate to the IDF for allocations. For all other ports, we use TLSF to manage an outer "port" heap. The IDF uses TLSF internally and we use their fork for the other ports. This also removes the dynamic C stack sizing. It wasn't often used and is not possible with a fixed outer heap. Fixes #8512. Fixes #7334.
2023-10-02 19:49:31 -04:00
#: py/runtime.c
complete rework for microcontroller.cpu.frequency and wifi.radio MAC addresses
2023-01-02 11:45:58 -05:00
msgid "can't set attribute '%q'"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitnative.c
msgid "can't store '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store to '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objcomplex.c
msgid "can't truncate-divide a complex number"
msgstr ""
#: extmod/moductypes.c
msgid "can't unambiguously get sizeof scalar"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modasyncio.c
pre-commit fixes
2023-08-14 00:47:22 -04:00
msgid "can't wait"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "cannot assign new shape"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex to dtype"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex type"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
#: py/objtype.c
msgid "cannot create instance"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "cannot delete array elements"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitnative.c
msgid "casting"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "channel re-init"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr ""
Add bitmaptools module
2021-02-24 00:23:14 -05:00
#: shared-bindings/bitmaptools/__init__.c
msgid "clip point must be (x,y) tuple"
msgstr ""
add ExtType, update doc, add a test
2020-12-07 18:16:16 -05:00
#: shared-bindings/msgpack/ExtType.c
msgid "code outside range 0~127"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""
#: shared-bindings/displayio/Palette.c
make translate
2020-02-03 23:41:15 -05:00
msgid "color buffer must be a buffer, tuple, list, or int"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/emitnative.c
msgid "comparison of int and uint"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objcomplex.c
msgid "complex divide by zero"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modzlib.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "compression header"
msgstr ""
#: py/emitnative.c
msgid "conversion to object"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "corrupted file"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "couldn't determine SD card version"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be iterable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be of equal length"
msgstr ""
imagecapture: implement to review suggestions
2021-04-20 11:21:32 -04:00
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "data pin #%d in use"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "data type not understood"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
#: py/compile.c
msgid "default 'except' must be last"
msgstr ""
add ExtType, update doc, add a test
2020-12-07 18:16:16 -05:00
#: shared-bindings/msgpack/__init__.c
msgid "default is not a function"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""
#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "dimensions do not match"
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/emitnative.c
msgid "div/mod not implemented for uint"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/create.c
msgid "divide by zero"
msgstr ""
Merge some messages
2022-11-08 16:36:23 -05:00
#: py/runtime.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "division by zero"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/vector.c
msgid "dtype must be float, or complex"
msgstr ""
straggling translate()s that my glob missed
2023-10-30 05:15:14 -04:00
#: extmod/ulab/code/ndarray_operators.c
msgid "dtype of int32 is not supported"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objdeque.c
msgid "empty"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/io/io.c
msgid "empty file"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modasyncio.c extmod/modheapq.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "empty heap"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr ""
#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr ""
make translate
2020-11-27 23:57:59 -05:00
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr ""
#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr ""
#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr ""
#: py/obj.c
msgid "expected tuple/list"
msgstr ""
#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr ""
#: py/compile.c
msgid "expecting an assembler instruction"
msgstr ""
#: py/compile.c
msgid "expecting just a value for set"
msgstr ""
#: py/compile.c
msgid "expecting key:value for dict"
msgstr ""
add ExtType, update doc, add a test
2020-12-07 18:16:16 -05:00
#: shared-bindings/msgpack/__init__.c
msgid "ext_hook is not a function"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr ""
#: py/argcheck.c
msgid "extra positional arguments given"
msgstr ""
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
fix typos (partial) detected by codepell
2023-03-18 11:17:02 -04:00
#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/gifio/OnDiskGif.c
#: shared-bindings/synthio/__init__.c shared-module/gifio/GifWriter.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "file must be a file opened in byte mode"
msgstr ""
add traceback module
2021-07-27 14:30:01 -04:00
#: shared-bindings/traceback/__init__.c
msgid "file write is not available"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/vector.c
msgid "first argument must be a callable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c
msgid "first argument must be an ndarray"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "first two arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint.c
msgid "float too big"
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: py/nativeglue.c
msgid "float unsupported"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/moddeflate.c
msgid "format"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "format requires a dict"
msgstr ""
#: py/objdeque.c
msgid "full"
msgstr ""
#: py/argcheck.c
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
msgid "function doesn't take keyword arguments"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr ""
#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "function is implemented for ndarrays only"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr ""
#: py/bc.c
msgid "function missing keyword-only argument"
msgstr ""
#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr ""
#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr ""
make translate
2020-08-04 14:58:43 -04:00
#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr ""
#: py/objgenerator.c
msgid "generator already executing"
msgstr ""
#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: py/objgenerator.c py/runtime.c
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
msgid "generator raised StopIteration"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modhashlib.c
Merge tag 'v1.16'
2021-06-18 11:54:19 -04:00
msgid "hash is final"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modheapq.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "heap must be a list"
msgstr ""
#: py/compile.c
msgid "identifier redefined as global"
msgstr ""
#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: py/compile.c
msgid "import * not at module level"
msgstr ""
Merge MicroPython v1.11 into CircuitPython
2021-04-22 20:55:39 -04:00
#: py/persistentcode.c
pre-commit fixes
2023-08-14 00:47:22 -04:00
msgid "incompatible .mpy arch"
msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
Merge MicroPython v1.11 into CircuitPython
2021-04-22 20:55:39 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "incomplete format"
msgstr ""
#: py/objstr.c
msgid "incomplete format key"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modbinascii.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "incorrect padding"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
msgid "index is out of bounds"
msgstr ""
update translations
2022-12-08 15:12:59 -05:00
#: shared-bindings/_pixelmap/PixelMap.c
Add adafruit_pixelmap.PixelMap .. a fast helper for animations. It is similar to and inspired by the PixelMap helper in Adafruit LED Animation library, but with an extremely fast 'paste' method for setting a series of pixels. This is a common operation for many animations, and can give a substantial speed improvement. It's named `adafruit_pixelmap` so that we can package a compatible version in pure Python for systems that can't fit it in C in flash, or for Blinka. This is a proof of concept and can make a very fast comet animation: ```python import time import adafruit_pixelbuf import adafruti_pixelmap import board import neopixel from supervisor import ticks_ms from adafruit_led_animation.animation.solid import Solid from adafruit_led_animation import color pixel_pin = board.GP0 pixel_num = 96 pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB") evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2))) odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4)) print(odd_indices) odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices) assert len(odds) == len(odd_indices) comet_length = 16 comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4) for i in range(comet_length)] comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4) for i in range(comet_length)] pos1 = 0 pos2 = 96//4 while True: evens.paste(comet1, pos1, wrap=True, reverse=False, others=0) pos1 = (pos1 + 1) % len(evens) odds.paste(comet2, pos2, wrap=True, reverse=True, others=0) pos2 = (pos2 - 1) % len(odds) pixels.show() m = ticks_ms() if m % 2000 > 1000: time.sleep(.02) ```
2022-11-10 12:02:31 -05:00
msgid "index must be tuple or int"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
Add MDNS support to Pico W This adds both cpy-MAC.local and circuitpython.local support. Fixes #7214
2022-11-22 20:10:54 -05:00
#: ports/espressif/common-hal/pulseio/PulseIn.c
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 13:21:50 -04:00
#: shared-bindings/bitmaptools/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "index out of range"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/obj.c
msgid "indices must be integers"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/espressif/common-hal/busio/I2C.c
msgid "init I2C"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "initial values must be iterable"
msgstr ""
fix stubs; make translate
2020-08-21 11:37:15 -04:00
#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "inline assembler must be a function"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/vector.c
msgid "input and output dimensions differ"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input and output shapes differ"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input argument must be an integer, a tuple, or a list"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input data must be an iterable"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input dtype must be float or complex"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input is not iterable"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input must be 1- or 2-d"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be a 1D ndarray"
msgstr ""
#: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be an ndarray, or a scalar"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "input must be square matrix"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "interp is defined for 1D iterables of equal length"
msgstr ""
Update translations
2019-10-21 22:50:17 -04:00
#: shared-bindings/_bleio/Adapter.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""
Merge MicroPython v1.11 into CircuitPython
2021-04-22 20:55:39 -04:00
#: py/compile.c
Fix tests and update translations
2023-10-20 19:56:30 -04:00
msgid "invalid arch"
Merge MicroPython v1.11 into CircuitPython
2021-04-22 20:55:39 -04:00
msgstr ""
make translate
2021-03-14 16:03:00 -04:00
#: shared-bindings/bitmaptools/__init__.c
#, c-format
Run make translate
2021-09-18 16:40:27 -04:00
msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32"
make translate
2021-03-14 16:03:00 -04:00
msgstr ""
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid cert"
msgstr ""
make translate
2021-03-14 16:03:00 -04:00
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element size %d for bits_per_pixel %d\n"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element_size %d, must be, 1, 2, or 4"
msgstr ""
add traceback module
2021-07-27 14:30:01 -04:00
#: shared-bindings/traceback/__init__.c
msgid "invalid exception"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "invalid format specifier"
msgstr ""
Add hostname validation
2020-10-15 06:38:01 -04:00
#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""
pico w: add ssl module Note: at this time, the ssl module on pico_w never verifies the server certificate. This means it does not actually provide a higher security level than regular socket / http protocols.
2022-09-29 10:08:28 -04:00
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid key"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "invalid micropython decorator"
msgstr ""
move `esp32_camera` to `espcamera`
2023-01-27 11:28:37 -05:00
#: ports/espressif/common-hal/espcamera/Camera.c
Implement a pile of getters & setters
2022-08-04 16:11:57 -04:00
msgid "invalid setting"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""
#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr ""
#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for number"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "iterations did not converge"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""
#: py/argcheck.c
update translations
2023-09-20 12:08:50 -04:00
msgid "keyword argument(s) not implemented - use normal args instead"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr ""
#: py/compile.c
msgid "label redefined"
msgstr ""
update translations
2019-08-25 00:37:42 -04:00
#: shared-bindings/audiomixer/MixerVoice.c
update translations
2019-08-19 22:40:31 -04:00
msgid "level must be between 0 and 1"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr ""
#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr ""
#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr ""
#: py/vm.c
msgid "local variable referenced before assignment"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/CAN.c
make translate
2020-10-21 12:30:33 -04:00
msgid "loopback + silent mode not supported by peripheral"
msgstr ""
Add mdns module This allows for CircuitPython to resolve a .local domain and find other devices with MDNS services. First step for #6174
2022-02-03 10:42:48 -05:00
#: ports/espressif/common-hal/mdns/Server.c
Add MDNS support to Pico W This adds both cpy-MAC.local and circuitpython.local support. Fixes #7214
2022-11-22 20:10:54 -05:00
#: ports/raspberrypi/common-hal/mdns/Server.c
Add mdns module This allows for CircuitPython to resolve a .local domain and find other devices with MDNS services. First step for #6174
2022-02-03 10:42:48 -05:00
msgid "mDNS already initialized"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
Add MDNS support to Pico W This adds both cpy-MAC.local and circuitpython.local support. Fixes #7214
2022-11-22 20:10:54 -05:00
#: ports/raspberrypi/common-hal/mdns/Server.c
Add mdns module This allows for CircuitPython to resolve a .local domain and find other devices with MDNS services. First step for #6174
2022-02-03 10:42:48 -05:00
msgid "mDNS only works with built-in WiFi"
msgstr ""
locale: run 'make translate'
2020-03-09 09:19:46 -04:00
#: py/parse.c
msgid "malformed f-string"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr ""
#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr ""
Support BLE advertising on ESP Services and characteristics still won't work. Progress on #5926
2022-01-26 19:12:33 -05:00
#: ports/espressif/common-hal/_bleio/Descriptor.c
make translate
2019-08-29 18:48:52 -04:00
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is "
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter must be > 0"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter should be > 0"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "median argument must be an ndarray"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr ""
#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objarray.c
msgid "memoryview offset too large"
msgstr ""
make translate
2021-02-20 16:17:38 -05:00
#: py/objarray.c
msgid "memoryview: length is not a multiple of itemsize"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modtime.c
msgid "mktime needs a tuple of length 8 or 9"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "mode must be complete, or reduced"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinimport.c
msgid "module not found"
msgstr ""
add monitor class Co-authored-by: anecdata <16617689+anecdata@users.noreply.github.com>
2021-11-02 01:30:11 -04:00
#: ports/espressif/common-hal/wifi/Monitor.c
msgid "monitor init failed"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/poly.c
msgid "more degrees of freedom than data points"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "multiple *x in assignment"
msgstr ""
#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""
#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr ""
#: py/emitnative.c
msgid "must raise an object"
msgstr ""
#: py/modbuiltins.c
msgid "must use keyword argument for key function"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
msgid "name '%q' is not defined"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
msgid "name not defined"
Reset translations to master
2019-03-27 23:47:58 -04:00
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/persistentcode.c
msgid "native code in .mpy unsupported"
msgstr ""
Merge MicroPython 1.14 into CircuitPython
2021-05-10 18:20:47 -04:00
#: py/asmthumb.c
msgid "native method too big"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitnative.c
msgid "native yield"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "ndarray length overflows"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
#: py/modmath.c
msgid "negative factorial"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
update translations
2022-12-08 15:12:59 -05:00
#: shared-bindings/_pixelmap/PixelMap.c
Add adafruit_pixelmap.PixelMap .. a fast helper for animations. It is similar to and inspired by the PixelMap helper in Adafruit LED Animation library, but with an extremely fast 'paste' method for setting a series of pixels. This is a common operation for many animations, and can give a substantial speed improvement. It's named `adafruit_pixelmap` so that we can package a compatible version in pure Python for systems that can't fit it in C in flash, or for Blinka. This is a proof of concept and can make a very fast comet animation: ```python import time import adafruit_pixelbuf import adafruti_pixelmap import board import neopixel from supervisor import ticks_ms from adafruit_led_animation.animation.solid import Solid from adafruit_led_animation import color pixel_pin = board.GP0 pixel_num = 96 pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB") evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2))) odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4)) print(odd_indices) odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices) assert len(odds) == len(odd_indices) comet_length = 16 comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4) for i in range(comet_length)] comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4) for i in range(comet_length)] pos1 = 0 pos2 = 96//4 while True: evens.paste(comet1, pos1, wrap=True, reverse=False, others=0) pos1 = (pos1 + 1) % len(evens) odds.paste(comet2, pos2, wrap=True, reverse=True, others=0) pos2 = (pos2 - 1) % len(odds) pixels.show() m = ticks_ms() if m % 2000 > 1000: time.sleep(.02) ```
2022-11-10 12:02:31 -05:00
msgid "nested index must be int"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "no SD card"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/vm.c
msgid "no active exception to reraise"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "no binding for nonlocal found"
Update translations
2019-01-31 12:38:29 -05:00
msgstr ""
add ExtType, update doc, add a test
2020-12-07 18:16:16 -05:00
#: shared-module/msgpack/__init__.c
msgid "no default packer"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modrandom.c
Merge MicroPython 1.14 into CircuitPython
2021-05-10 18:20:47 -04:00
msgid "no default seed"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinimport.c
msgid "no module named '%q'"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "no response from SD card"
msgstr ""
move `esp32_camera` to `espcamera`
2023-01-27 11:28:37 -05:00
#: ports/espressif/common-hal/espcamera/Camera.c py/objobject.c py/runtime.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "no such attribute"
make translate
2019-07-09 08:43:54 -04:00
msgstr ""
Add S3 GATT client support This allows you to connect to GATT services on the other device. It also adds connection initiation (GAP central). More progress on #5926
2022-02-10 14:31:57 -05:00
#: ports/espressif/common-hal/_bleio/Connection.c
Update translations
2019-10-21 22:50:17 -04:00
#: ports/nrf/common-hal/_bleio/Connection.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "non-UUID found in service_uuids_whitelist"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "non-default argument follows default argument"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objstr.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "non-hex digit found"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again
2020-12-23 22:52:27 -05:00
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "non-zero timeout must be > 0.01"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "non-zero timeout must be >= interval"
ulab: Update to release tag 1.1.0 Disable certain classes of diagnostic when building ulab. We should submit patches upstream to (A) fix these errors and (B) upgrade their CI so that the problems are caught before we want to integrate with CircuitPython, but not right now.
2020-11-15 12:48:53 -05:00
msgstr ""
make translate
2019-08-29 18:48:52 -04:00
#: shared-bindings/_bleio/UUID.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "not a 128-bit UUID"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/parse.c
msgid "not a constant"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "not all arguments converted during string formatting"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "not enough arguments for format string"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/carray/carray_tools.c
msgid "not implemented for complex dtype"
msgstr ""
#: extmod/ulab/code/numpy/bitwise.c
msgid "not supported for input types"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "number of points must be at least 2"
msgstr ""
Add localization for built-in help Support localizing the output of a call to to match the firmware's language.
2020-12-30 18:47:35 -05:00
#: py/builtinhelp.c
msgid "object "
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#, c-format
msgid "object '%s' isn't a tuple or list"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "object doesn't support item assignment"
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-10 23:19:10 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "object doesn't support item deletion"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
msgid "object has no len"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/obj.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "object isn't subscriptable"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
msgid "object not an iterator"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objtype.c py/runtime.c
msgid "object not callable"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/sequence.c shared-bindings/displayio/Group.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "object not in sequence"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
msgid "object not iterable"
msgstr ""
#: py/obj.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#, c-format
msgid "object of type '%s' has no len()"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/obj.c
msgid "object with buffer protocol required"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objstr.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "odd-length string"
msgstr ""
Wi-Fi autoconnect and title bar status This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD in `/.env`. When both are defined, CircuitPython will attempt to connect to the network even when user code isn't running. If the user code attempts to a network with the same SSID, it will return immediately. Connecting to another SSID will disconnect from the auto-connected network. If the user code initiates the connection, then it will be shutdown after user code exits. (Should match <8 behavior.) This PR also reworks the default displayio terminal. It now supports a title bar TileGrid in addition to the (newly renamed) scroll area. The default title bar is the top row of the display and is positioned to the right of the Blinka logo when it is enabled. The scroll area is now below the Blinka logo. The Wi-Fi auto-connect code now uses the title bar to show its state including the IP address when connected. It does this through the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s> is the title bar string. This is commonly supported by terminals so it should work over USB and UART as well. Related to #6174
2022-06-06 19:54:02 -04:00
#: supervisor/shared/web_workflow/web_workflow.c
msgid "off"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/utils/utils.c
msgid "offset is too large"
msgstr ""
make translate again
2020-12-23 22:52:27 -05:00
#: shared-bindings/dualbank/__init__.c
msgid "offset must be >= 0"
ulab: Update to release tag 1.1.0 Disable certain classes of diagnostic when building ulab. We should submit patches upstream to (A) fix these errors and (B) upgrade their CI so that the problems are caught before we want to integrate with CircuitPython, but not right now.
2020-11-15 12:48:53 -05:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/create.c
msgid "offset must be non-negative and no greater than buffer length"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/audiobusio/PDMIn.c
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 16:15:15 -04:00
#: ports/stm/common-hal/audiobusio/PDMIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "only bit_depth=16 is supported"
msgstr ""
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 16:15:15 -04:00
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only mono is supported"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/create.c
msgid "only ndarrays can be concatenated"
msgstr ""
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 16:15:15 -04:00
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only oversample=64 is supported"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/audiobusio/PDMIn.c
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 16:15:15 -04:00
#: ports/stm/common-hal/audiobusio/PDMIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "only sample_rate=16000 is supported"
msgstr ""
#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
Rework the coproc API It is now a generic `memorymap` API and an ESP specific `espulp` module. Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-02 17:54:42 -05:00
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
add coproc module
2022-10-19 11:05:48 -04:00
#: shared-bindings/nvm/ByteArray.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "only slices with step=1 (aka None) are supported"
update translations
2019-01-13 23:52:05 -05:00
msgstr ""
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
#: py/vm.c
msgid "opcode"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/bitwise.c
#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/vector.c
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for 2D arrays only"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""
straggling translate()s that my glob missed
2023-10-30 05:15:14 -04:00
#: extmod/ulab/code/ndarray_operators.c
msgid "operation not supported for the input types"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/modbuiltins.c
msgid "ord expects a character"
msgstr ""
#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/utils/utils.c
msgid "out array is too small"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out keyword is not supported for complex dtype"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out keyword is not supported for function"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "out must be a float dense array"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out must be of float dtype"
msgstr ""
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
#: shared-bindings/bitmaptools/__init__.c
shorten error strings
2020-08-21 22:40:46 -04:00
msgid "out of range of target"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr ""
make translate
2020-09-12 16:11:02 -04:00
#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr ""
#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr ""
#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr ""
add waveform support in synthio a waveform object (array of 'h') can be passed in, replacing the standard square wave. This waveform must be a 'single cycle waveform' and some obvious things to pass in are sine, triangle or sawtooth waves, but you can construct whatever you like.
2023-04-01 11:21:22 -04:00
#: shared-bindings/bitmaptools/__init__.c
Reset translations to master
2019-03-27 23:47:58 -04:00
msgid "pixel coordinates out of bounds"
Support internationalisation.
2018-07-31 19:53:54 -04:00
msgstr ""
Merge tag 'v1.18' Boosted performance, board.json metadata, more mimxrt, rp2, samd features This release of MicroPython sees a boost to the overall performance of the VM and runtime. This is achieved by the addition of an optional cache to speed up general hash table lookups, as well as a fast path in the VM for the LOAD_ATTR opcode on instance types. The new configuration options are MICROPY_OPT_MAP_LOOKUP_CACHE and MICROPY_OPT_LOAD_ATTR_FAST_PATH. As part of this improvement the MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE option has been removed, which provided a similar map caching mechanism but with the cache stored in the bytecode, which made it not useful on bare metal ports. The new mechanism is measured to be at least as good as the old one, applies to more map lookups, has a constant RAM overhead, and applies to native code as well as bytecode. These performance options are enabled on the esp32, mimxrt, rp2, stm32 and unix ports. For esp32 and mimxrt some code is also moved to RAM to further boost performance. On stm32, performance increases by about 20% for benchmarks that are heavy on name lookups, like misc_pystone.py and misc_raytrace.py. On esp32 performance can increase by 2-3x, and on mimxrt it is up to 6x. All boards in all ports now have a board.json metadata file, which is used to automatically build firmware and generate a webpage for that board (among other possibilities). Auto-build scripts have been added for this purpose and they build all esp32, mimxrt, rp2, samd and stm32 boards. The generated output is available at https://micropython.org/download. Support for FROZEN_DIR and FROZEN_MPY_DIR has been deprecated for some time and was finally removed in this release. Instead of these, FROZEN_MANIFEST can be used. The io.resource_stream() function is also removed, replaced by the pure Python version in micropython-lib. The search order for importing frozen Python modules is now controlled by the ".frozen" entry in sys.path. This string is added by default in the second position in sys.path. User code should adjust sys.path depending on the desired behaviour. Putting ".frozen" first in sys.path will speed up importing frozen modules. A bug in multiple precision integers with bitwise of -0 was fixed in commit 2c139bbf4e5724ab253b5b034ce925e04267a9c4. The platform module has been added to allow querying the compiler and underlying SDK/HAL/libc version. This is enabled on esp32, mimxrt and stm32 ports. The mpremote tool now supports seek, flush, mkdir and rmdir on PC-mounted filesystems. And a help command has been added. The documentation has seen many additions and improvements thanks (for a second time) to the Google Season of Docs project. The rp2 documentation now includes a reference for PIO assembly instructions, a PIO quick reference and a PIO tutorial. The random and stm modules have been documented, along with sys.settrace, manifest.py files and mpremote. There is also now more detail about the differences between MicroPython and standard Python 3.5 and above. The esp32 port sees support for ESP32-S3 SoCs, and new boards GENERIC_S3, ESP32_S2_WROVER, LOLIN_S2_MINI, LOLIN_S2_PICO and UM_FEATHERS2NEO. The PWM driver has been improved and now supports all PWM timers and channels, and the duty_u16() and duty_ns() methods, and it keeps the duty constant when changing frequency. The machine.bitstream() function has been improved to use RMT, with an option to select the original bit-banging implementation. The mimxrt port gained new hardware features: SDRAM and SD card support, as well as network integration with a LAN driver. The machine.WDT class was added along with the machine.reset_cause(), machine.soft_reset(), machine.unique_id() add machine.bitstream() functions. DHT sensor support was added, and f-strings were enabled. The rp2 port now has support for networking, and bluetooth using NimBLE. The Nina-W10 WiFi/BT driver is fully integrated and supported by the new Arduino Nano RP2040 connect board. I2S protocol support is added along with a machine.bitstream() driver and DHT sensor support. The PWM driver had a bug fix with the accuracy of setting/getting the frequency, and the duty value is now retained when changing the frequency. On the samd port there is now support for the internal flash being a block device, and for filesystems and the os module. Pin and LED classes have been implemented. There are more time functions, more Python features enabled, and the help() function is added. SEEED_WIO_TERMINAL and SEEED_XIAO board definitions are now available. The stm32 port now has support for F427, F479 and H7A3(Q)/H7B3(Q) MCUs, and new board definitions for VCC_GND_H743VI, OLIMEX_H407, MIKROE_QUAIL, GARATRONIC_PYBSTICK26_F411, STM32H73B3I_DK. A bug was fixed in the SPI driver where a SPI transfer could fail if the CYW43 WiFi driver was also active at the same time. On the windows port the help() function has been enabled, and support for build variants added, to match the unix port. The zephyr port upgraded Zephyr to v2.7.0. The change in code size since the previous release for various ports is (absolute and percentage change in the text section): bare-arm: -1520 -2.605% minimal x86: -2256 -1.531% unix x64: -457 -0.089% unix nanbox: -925 -0.204% stm32: +312 +0.079% PYBV10 cc3200: -176 -0.096% esp8266: +532 +0.076% GENERIC esp32: +27096 +1.820% GENERIC nrf: -212 -0.121% pca10040 rp2: +9904 +2.051% PICO samd: +35332 +33.969% ADAFRUIT_ITSYBITSY_M4_EXPRESS The changes that dominate these numbers are: - bare-arm, minimal: use of new MICROPY_CONFIG_ROM_LEVEL_MINIMUM option and subsequent disabling of remaining optional features - unix, cc3200, nrf: general code size reductions of the core - stm32: performance improvements, addition of platform module - esp8266: enabling f-strings - esp32: use of -O2 instead of -Os - rp2: machine.I2S and other new hardware features - samd: filesystem support and other new hardware features Thanks to everyone who contributed to this release: Alan Dragomirecký, Alexey Shvetsov, Andrew Leech, Andrew Scheller, Antoine Aubert, Boris Vinogradov, Chris Boudacoff, Chris Fiege, Christian Decker, Damien George, Daniel Gorny, Dave Hylands, David Michieli, Emilie Feral, Frédéric Pierson, gibbonsc, Henk Vergonet, iabdalkader, Ihor Nehrutsa, Jan Hrudka, Jan Staal, jc_.kim, Jim Mussared, Jonathan Hogg, Laurens Valk, leo chung, Lorenzo Cappelletti, Magnus von Wachenfeldt, Matt Trentini, Matt van de Werken, Maureen Helm, Michael Bentley, Michael Buesch, Mike Causer, Mike Teachman, Mike Wadsten, Ned Konz, NitiKaur, oli, patrick, Patrick Van Oosterwijck, Peter Boin, Peter Hinch, Peter van der Burg, Philipp Ebensberger, Pooya Moradi, retsyo, robert-hh, roland van straten, Scott Armitage, Sebastian Wicki, Seon Rozenblum, Sergei Silnov, Simon Baatz, Stewart Bonnick, stijn, Tobias Thyrrestrup, Tomas Vanek, YoungJoon Chun. What follows is a detailed list of changes, generated from the git commit history, and organised into sections. Main components =============== all: - remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE - update Python formatting to latest Black version 21.12b0 - remove support for FROZEN_DIR and FROZEN_MPY_DIR py core: - parse: simplify parse nodes representing a list - emitnative: ensure load_subscr does not clobber existing REG_RET - mpconfig.h: define initial templates for "feature levels" - vm: add a fast path for LOAD_ATTR on instance types - map: add an optional cache of (map+index) to speed up map lookups - builtinimport: forward all debug printing to MICROPY_DEBUG_PRINTER - add wrapper macros so hot VM functions can go in fast code location - runtime: fix crash when exc __new__ doesn't return an exc instance - mpconfig.h: define the "extra" feature level - mpconfig.h: revert MICROPY_REPL_INFO to disabled at all levels - gc: add hook to run code during time consuming GC operations - showbc: print unary-op string when dumping bytecode - modsys: replace non-ASCII quote char with ASCII char - runtime: allow types to use both .attr and .locals_dict - lexer: support nested [] and {} characters within f-string params - objfun.h: remove obsolete comments about entries in extra_args - builtinimport: refactor module importing - showbc: fix printing of raw bytecode header on nanbox builds - modio: remove io.resource_stream function - only search frozen modules when '.frozen' is found in sys.path - mkrules.cmake: set frozen preprocessor defs early - runtime: allow initialising sys.path/argv with defaults - mpstate.h: only include sys.path/argv objects in state when enabled - mpz: fix bugs with bitwise of -0 by ensuring all 0's are positive - qstr: reset mpstate.qstr_last_chunk before raising an error - modbuiltins: add additional macro for extending builtins - mpconfig.h: define MICROPY_PY_USSL_FINALISER only if not defined extmod: - machine_i2c: make SoftI2C configurable via macro option - machine_spi: make SoftSPI configurable via macro option - modonewire: make _onewire module configurable via macro option - machine_pwm: factor out machine.PWM bindings to common code - move modnetwork and modusocket from stm32 to extmod - modnetwork: add STA_IF and AP_IF constants - modnetwork: add extended socket state - modusocket: add read/write stream methods to socket object - modnetwork: define network interfaces in port config files - network_cyw43: make consistent use of STA and AP constants - modnetwork: remove STM32 references - modnetwork: remove modnetwork socket u_state member - mpbthci.h: add mp_bluetooth_hci_uart_any prototype - nimble: add nimble CMake fragment file - add platform module - moduplatform: improve implementation for PC ports - vfs_posix_file: support MP_STREAM_POLL in vfs_posix_file_ioctl - modbluetooth: add connection interval to gap_connect - nimble: update to NimBLE v1.4 - nimble: remove workaround for OS_ENOMEM - uasyncio: fix gather returning exceptions from a cancelled task - uplatform: remove unused definitions - uplatform: use generic custom platform string - network_ninaw10: fix scan list order to match other NICs - modbluetooth: support gap_connect(None) to cancel a connection - modure: redirect regex debug printing to mp_printf - network_ninaw10: fix config of AP mode - network_ninaw10: disable active connections before connecting - network_ninaw10: make NIC state persistent - network_ninaw10: return -1 on timeout from recv/send - network_ninaw10: make recv/recvfrom interchangeable - moduplatform: detect xtensa arch - modusocket: allow setting timeout on unbound sockets - modusocket: initialise accepted socket state - network_ninaw10: use socket timeout preset in modusocket - modbluetooth: fix conditional compilation of ringbuf_put_uuid - modbluetooth: put declaration of connect_cancel in correct place shared: - libc/string0: don't include string.h, and provide __memcpy_chk - runtime/pyexec: cleanup EXEC_FLAG flag constants drivers: - ninaw10: add ublox Nina-W10 WiFi/BT module driver - lsm6dsox: add LSM6DSOX driver and examples - neopixel: avoid heap alloc in fill() - ninaw10: fix BSSID byte order, and add null byte to ESSID - ninaw10/nina_wifi_drv: fix DNS resolution mpy-cross: no changes specific to this component/port lib: - mynewt-nimble: switch to the MicroPython fork of NimBLE - asf4: point submodule to latest commit on circuitpython branch - update pico-sdk to 1.3.0 and tinyusb to 0.12.0 - stm32lib: update library for L4 v1.17.0, new G4, WL, and MMC fixes - stm32lib: update library for fix to F7 USB HS Support components ================== docs: - library/os.rst: clarify littlefs requirements for block erase - library/bluetooth.rst: update incorrect link to gatts_write - make.bat: change Windows output dir from '_build' to 'build' - library/machine.I2S.rst: specify that I2S.shift args are kw-only - esp32: explain ESP32 PWM modes, timers, and channels - rp2: add reference for PIO assembly instructions, and PIO tutorial - library/random.rst: document the random module - reference/mpremote.rst: add docs for mpremote - reference/manifest.rst: add docs for manifest.py files - library/stm.rst: document the stm module - esp32/tutorial: add an example of peripheral control via regs - rp2/general.rst: fix typo with missing spaces - library/framebuf.rst: adjust dimensions in example - library/rp2.rst: update function asm_pio_encode to add sideset_opt - reference/filesystem.rst: add detail on how to use littlefs fuse - rp2/quickref.rst: add section on PIO - library/sys.rst: add docs for sys.settrace - esp8266/tutorial: fix comments of FrameBuffer examples - library/uasyncio.rst: detail exception behaviour in cancel/timeout - library/machine.Timer.rst: document 'id' as positional-only arg - library/machine.SPI.rst: add example SPI usage - library/machine.Timer.rst: document `period` and `callback` args - library/machine.Pin.rst: add Pin.ANALOG mode constant - remove trailing spaces and convert tabs to spaces - library/sys.rst: add note about '.frozen' as an entry in sys.path - differences: document details of new PEPs/features in Python 3.5+ - update copyright year range to include 2022 - esp32: update RMT quickref example to match latest code examples: no changes specific to this component/port tests: - perf_bench: use math.log instead of math.log2 - basics: add tests for type-checking subclassed exc instances - micropython/const.py: add comment about required config for test - cpydiff: clarify f-string diffs regarding concatenation - basics/int_big_cmp.py: add more tests for big-int comparison - extmod: skip uselect_poll_udp when poll() is not available tools: - autobuild: add auto build for GENERIC_C3_USB - ci.sh: use IDF v4.4 as part of esp32 CI and build GENERIC_S3 - autobuild: add the MIMXRT1010_EVK board to autobuild - ci.sh: use a specific ESP IDF v4.4 commit - autobuild: add script to generate website board metadata - dfu.py: make tool work with python3 when parsing DFU files - autobuild: automatically build all mimxrt, rp2 and samd boards - autobuild: automatically build all stm32 boards - mpremote: implement seek and flush in ioctl method - autobuild: automatically build all esp32 boards - upip.py: support == to specify exact package version - makemanifest.py: make str conversion compatible with Python 2 - makemanifest.py: merge make-frozen.py - mpremote: add mkdir and rmdir to RemoteFS - mpremote: add help command - mpremote: add link to mpremote docs URL in help message - upip.py: skip '.frozen' entry in sys.path for install path - autobuild: build esp8266 OTA image with GENERIC_1M board - ci.sh: upgrade Zephyr docker image to v0.21.0 - ci.sh: build zephyr nucleo_wb55rg to test zephyr bluetooth build CI: - workflows: use Python 3.8 for macos workflow - workflows: add new workflow to build ports download metadata The ports ========= all ports: - add board.json for all boards - add images, features and urls to board.json - add '.frozen' as the first entry in sys.path - move '.frozen' to second entry in sys.path bare-arm port: - mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM - mpconfigport.h: disable remaining optional features cc3200 port: no changes specific to this component/port esp8266 port: - boards/GENERIC: enable f-strings - extract qstr from object when comparing keys in config() - etshal.h: remove unneeded function declarations - allow building a board to any dest directory esp32 port: - boards: add new FeatherS2-Neo board definition - machine_timer: use tx_update member for IDF 4.4 and above - add support for ESP32-S3 SoCs - boards: add new GENERIC_S3 board definition - machine_hw_spi: fix hardware SPI DMA channels for S2/S3 - boards: add board definition for ESP32-S2-WROVER module - boards: add LOLIN_S2_MINI ESP32-S2 board - machine_pwm: add support for all PWM timers and channels - README: updated readme with req IDF vers for ESP32-S2, C3 and S3 - usb: add USB host connection detection for CDC serial output - machine_pin: block out IO16 and IO17 when using SPIRAM on ESP32 - mpthreadport: fix TCB cleanup function so thread_mutex is ready - main: add option for a board to hook code into startup sequence - split out WLAN code from modnetwork.c to network_wlan.c - enable optimisations and move code to iRAM to boost performance - usb: improve speed of USB CDC output - add specific deploy_s2.md instructions for esp32-s2 - boards/LOLIN_S2_MINI: add image to board.json - boards: update board and deploy metadata for UM_xxx boards - usb: further improve speed of USB CDC output - boards/LOLIN_S2_PICO: add LOLIN_S2_PICO board definition files - boards/ESP32_S2_WROVER: link to specific deploy_s2 instructions - support building with latest IDF v5 - in machine_i2s, send null samples in underflow situations - in machine_i2s, make object reference arrays root pointers - add SDCard support for S3, and a GENERIC_S3_SPIRAM board - boards/GENERIC_S3: enable BLE on ESP32 S3 - machine_pwm: implement duty_u16() and duty_ns() PWM methods - extract qstr from object when comparing keys in config() - machine_pin: make GPIO 26 usable for S2,S3 if SPIRAM not config'd - machine_hw_spi: fix SPI default pins reordering on ESP32-S2/S3 - machine_hw_spi: set proper default SPI(id=1) pins on S2,S3 and C3 - machine_hw_spi: set proper default SPI(id=2) pins on S2 and S3 - boards: remove SPI pin defaults from GENERIC S2/S3 boards - modnetwork: synchronize WiFi AUTH_xxx constants with IDF values - machine_pwm: keep duty constant when changing frequency - machine_bitstream: replace bit-bang code with RMT-based driver - machine_i2s: add support for ESP-IDF 4.4 - machine_bitstream: fix signal duplication on output pins - esp32: enable platform module with IDF version - boards/GENERIC_D2WD: build with -Os optimisation - esp32_rmt: install RMT driver on core 1 - machine_bitstream: reinstate bitstream bit-bang implementation javascript port: no changes specific to this component/port mimxrt port: - sdcard: implement SDCard driver - machine_bitstream: add bitstream function to machine module - rework flash configuration - sdram: add SDRAM support - eth: add LAN support and integrate the network module - modmachine: implement machine.WDT() and machine.reset_cause() - boards: fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK - hal: remove duplicate definitions from flexspi_hyper_flash.h - dma_channel: fix the DMA channel management - fix cycle counter for time.ticks_cpu() and machine.bitstream() - add dht_readinto() to the mimxrt module, and freeze dht.py - extend the help() message and README.md - mpconfigport.h: enable f-strings - modmachine: implement soft_reset() and unique_id() functions - boards/make-pins.py: allow empty lines and comments in pins.csv - optimize the runtime speed - enable the platform module - boards: add the Seeed ARCH MIX board - boards: update the board.json files and add deploy_xx.md files - fix mp_hal_quiet_timing_enter()/exit() so timer still runs - support PWM using the FLEXPWM and QTMR modules - define UART 0 on MIMXRT boards - support selection of PHY type and address - re-enable eth checksum creation by HW - fix a tiny unnoticed bug in sdcard.c - add a driver for the DP83848 PHY device - refactor the reading of the machine id - enable ticks_cpu at boot time for NDEBUG builds only - use -Og instead of -O0 for DEBUG builds - tidy up the board flash related files - hal: allow readSampleClkSrc to be configured by a board - enable MICROPY_PY_USSL_FINALISER minimal port: - mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM - Makefile: don't force a 32-bit build - mpconfigport.h: disable features that are not needed nrf port: - Makefile: improve Black Magic Probe commands - main: use VFS helper function to mount fs and chdir pic16bit port: no changes specific to this component/port powerpc port: no changes specific to this component/port qemu-arm port: no changes specific to this component/port rp2 port: - mpconfigport.h: enable heapq module - add support for bluetooth module using NimBLE - add framework for networking - mpconfigport.h: use the "extra" feature level - enable optimisations (comp goto, map cache, fast attr) - machine_i2s: add I2S protocol support - add support for Nina-W10 WiFi/BT module - boards: add support for Arduino Nano RP2040 - machine_bitstream: implement the machine.bitstream driver - boards: add neopixel.py to manifest.py - rp2_pio: support exec with sideset - boards/PIMORONI_PICOLIPO_16MB: fix 16MB flash size - boards: add PYBSTICK26 RP2040 board definition - machine_uart: handle and clear UART RX timeout IRQ - boards/ARDUINO_NANO_RP2040_CONNECT: set default I2C pins - machine_pwm: fix PWM frequency setting - machine_pwm: keep duty value when changing the frequency - add support for DHT11 and DHT22 sensors - CMakeLists.txt: allow a board to override PICO_BOARD - boards/GARATRONIC_PYBSTICK26_RP2040: use correct pico-sdk board cfg samd port: - integrate latest asf4, add help, more time funcs and uPy features - samd_soc: allow a board to configure the low-level MCU config - add internal flash block device, filesystem and uos support - add Pin and LED classes, and machine.unique_id - boards/ADAFRUIT_FEATHER_M0_EXPRESS: update for flash and pins - boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: update for flash and pins - boards/MINISAM_M4: update for flash and pins - boards/ADAFRUIT_TRINKET_M0: update for flash and pins - boards/SAMD21_XPLAINED_PRO: update for flash and pins - boards/SEEED_WIO_TERMINAL: add new board definition - boards/SEEED_XIAO: add new board definition - README.md: update README to reflect new features and boards stm32 port: - pin: enable GPIO clock of pin if it's constructed without init - main: don't unconditionally enable GPIO A,B,C,D clocks - boards/VCC_GND_H743VI: add board definition for VCC_GND_H743VI - boards/OLIMEX_E407: add Ethernet RMII support - boards/LEGO_HUB_NO6: remove user paths from cc2564 init file - boards: remove trailing spaces, and add newline at end of file - add basic support for STM32H750 - add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn - suggest putting code in main.py not boot.py - boards/make-pins.py: allow a CPU pin to be hidden - boards/make-pins.py: allow empty lines and comments in pins.csv - dma: add functions for external users of DMA to enable clock - enable LOAD_ATTR fast path, and map lookup caching on >M0 - boards: add OLIMEX H407 board definition - enable platform module - extended flash filesystem space to 512K on H743 boards - boards/NUCLEO_H743ZI: enable VfsLfs2 on NUCLEO_H743ZI(2) boards - boards: add PF11-BOOT0 to stm32f091_af.csv - machine_i2c: use hardware I2C for STM32H7 - sdram: enforce gcc opt, and use volatile and DSB in sdram_test - usbd_cdc_interface: allow a board to hook into USBD CDC RX events - mpbthciport: allow a board to hook BT HCI poll functions - pendsv: allow a board to add entries for pendsv_schedule_dispatch - boards: add images to board.json for Adafruit and VCC_GND boards - uart: fix race conditions and clearing status in IRQ handler - mpconfigport.h: use the "extra" feature level - in machine_i2s, send null samples in underflow situations - in machine_i2s, make object reference arrays root pointers - led: support an extra 2 LEDs in board configuration - boards/MIKROE_CLICKER2_STM32: add more detail to board.json - boards: add new board MikroElektronika Quail, and F427 support - main: run optional frozen module at boot - sdio: don't explicitly disable DMA2 on deinit of SDIO - dma: make DMA2_Stream3 exclusive to SDIO when CYW43 enabled - boards: build NUCLEO_WB55 and STM32F769DISC without mboot enabled - boards: add PYBSTICK26 F411 board definition - boards/NADHAT_PYBF405: rename board to GARATRONIC_NADHAT_F405 - usb: use a table of allowed values to simplify usb_mode get/set - boards/NUCLEO_WB55: update rfcore_firmwre for new WS - flashbdev: support generic flash storage config via link symbols - boards: convert F413,F439,H743,L4xx,WB55 to new flash FS config - add support for F479 MCUs - include HAL MMC code in F4 builds - boards/make-pins.py: use cpu pins to define static alt-fun macros - boards/NUCLEO_WB55: fix LED ordering - boards/LEGO_HUB_NO6: set filesystem label as HUB_NO6 - boards: remove stray '+' characters at start of lines in ld files - boards: remove unused MICROPY_HW_ENABLE_TIMER config - boards: enable MICROPY_HW_ENABLE_SERVO on various boards - update L4 code to build with latest stm32lib and L4 HAL 1.17.0 - main: call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled - sdcard: support 8-bit wide SDIO bus - sdcard: add config option to force MM card capacity - factoryreset: init vfs flags before calling pyb_flash_init_vfs - qspi: fix typo in address comment - boards/make-pins.py: generate empty ADC table if needed - boards/OLIMEX_H407: fix typo in OLIMEX H407 board.json - network_wiznet5k: fix build error with wiznet5k and lwip enabled - enable MICROPY_PY_USSL_FINALISER teensy port: - switch to use manifest.py instead of FROZEN_DIR unix port: - enable LOAD_ATTR fast path, and map lookup caching - modusocket: support MP_STREAM_POLL in unix socket_ioctl - modos: add support for uos.urandom(n) - coverage: change remaining printf to mp_printf - Makefile: use -Og instead of -O0 for debug builds windows port: - README: remove unsupported Python instructions for Cygwin - mpconfigport.h: enable help and help("modules") - add support for build variants to windows port - run tests via Makefile - appveyor: build both standard and dev variants - appveyor: build mpy-cross only once for mingw-w64 - msvc: run qstr preprocessing phase in parallel zephyr port: - mphalport.h: remove unused and unimplemented C-level pin API - increase minimum CMake version to 3.20.0 - update include path to reboot.h - get UART console device from devicetree instead of Kconfig - use CONFIG_USB_DEVICE_STACK for conditional USB device support - upgrade to Zephyr v2.7.0 - modbluetooth_zephyr: provide dummy connect_cancel function
2022-02-15 13:36:26 -05:00
#: extmod/vfs_posix_file.c
msgid "poll on file not available on win32"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/pulseio/PulseIn.c
Update make translate script
2020-09-29 01:44:30 -04:00
msgid "pop from an empty PulseIn"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
Update translations and translation sources
2020-01-18 14:57:57 -05:00
#: ports/cxd56/common-hal/pulseio/PulseIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: ports/nrf/common-hal/pulseio/PulseIn.c
make translate
2021-03-14 16:03:00 -04:00
#: ports/raspberrypi/common-hal/pulseio/PulseIn.c
make translate
2020-08-04 14:58:43 -04:00
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
"pop from empty %q" Saves 12 bytes code on trinket m0
2020-08-04 19:34:59 -04:00
msgid "pop from empty %q"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Translations
2021-02-05 13:24:55 -05:00
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "port must be >= 0"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/compile.c
msgid "positional arg after **"
msgstr ""
#: py/compile.c
msgid "positional arg after keyword arg"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr ""
#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr ""
make translate
2021-03-04 15:23:06 -05:00
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "pull masks conflict with direction masks"
msgstr ""
locale: run 'make translate'
2020-03-09 09:19:46 -04:00
#: py/parse.c
Merge tag 'v1.17' into merge-1.17 F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board This release of MicroPython adds support for f-strings (PEP-498), with a few limitations compared to normal Python. F-strings are essentially syntactic sugar for "".format() and make formatting strings a lot more convenient. Other improvements to the core runtime include pretty printing OSError when it has two arguments (an errno code and a string), scheduling of KeyboardInterrupt on the main thread, and support for a single argument to the optimised form of StopIteration. In the machine module a new I2S class has been added, with support for esp32 and stm32 ports. This provides a consistent API for transmit and receive of audio data in blocking, non-blocking and asyncio-based operation. Also, the json module has support for the "separators" argument in the dump and dumps functions, and framebuf now includes a way to blit between frame buffers of different formats using a palette. A new, portable machine.bitstream function is also added which can output a stream of bits with configurable timing, and is used as the basis for driving WS2812 LEDs in a common way across ports. There has been some restructuring of the repository directory layout, with all third-party code now in the lib/ directory. And a new top-level directory shared/ has been added with first-party code that was previously in lib/ moved there. The docs have seen further improvement with enhancements and additions to the rp2 parts, as well as a new quick reference for the zephyr port. The terms master/slave have been replaced with controller/peripheral, mainly relating to I2C and SPI usage. And u-module references have been replaced with just the module name without the u-prefix to help clear up the intended usage of modules in MicroPython. For the esp8266 and esp32 ports, hidden networks are now included in WLAN scan results. On the esp32 the RMT class is enhanced with idle_level and write_pulses modes. There is initial support for ESP32-C3 chips with GENERIC_C3 and GENERIC_C3_USB boards. The javascript port has had its Makefile and garbage collector implementation reworked so it compiles and runs with latest the Emscripten using asyncify. The mimxrt port sees the addition of hardware I2C and SPI support, as well as some additional methods to the machine module. There is also support for Hyperflash chips. The nrf port now has full VFS storage support, enables source-line on traceback, and has .mpy features consistent with other ports. For the rp2 port there is now more configurability for boards, and more boards added. The stm32 port has a new LEGO_HUB_NO6 board definition with detailed information how to get this LEGO Hub running stock MicroPython. There is also now support to change the CPU frequency on STM32WB MCUs. And USBD_xxx descriptor options have been renamed to MICROPY_HW_USB_xxx. Thanks to everyone who contributed to this release: Amir Gonnen, Andrew Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki, David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar, Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur, oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum, Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt. What follows is a detailed list of changes, generated from the git commit history, and organised into sections. Main components =============== all: - fix signed shifts and NULL access errors from -fsanitize=undefined - update to point to files in new shared/ directory py core: - mpstate: make exceptions thread-local - mpstate: schedule KeyboardInterrupt on main thread - mperrno: add MP_ECANCELED error code - makeqstrdefs.py: don't include .h files explicitly in preprocessing - mark unused arguments from bytecode decoding macros - objexcept: pretty print OSError also when it has 2 arguments - makeversionhdr: add --tags arg to git describe - vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode - objexcept: make mp_obj_exception_get_value support subclassed excs - support single argument to optimised MP_OBJ_STOP_ITERATION - introduce and use mp_raise_type_arg helper - modsys: optimise sys.exit for code size by using exception helpers - objexcept: make mp_obj_new_exception_arg1 inline - obj: fix formatting of comment for mp_obj_is_integer - emitnative: reuse need_reg_all func in need_stack_settled - emitnative: ensure stack settling is safe mid-branch - runtime: fix bool unary op for subclasses of native types - builtinimport: fix condition for including do_execute_raw_code() - mkrules: automatically build mpy-cross if it doesn't exist - implement partial PEP-498 (f-string) support - lexer: clear fstring_args vstr on lexer free - mkrules.mk: do submodule sync in "make submodules" extmod: - btstack: add missing call to mp_bluetooth_hci_uart_deinit - btstack: check that BLE is active before performing operations - uasyncio: get addr and bind server socket before creating task - axtls-include: add axtls_os_port.h to customise axTLS - update for move of crypto-algorithms, re1.5, uzlib to lib - moduselect: conditionally compile select() - nimble: fix leak in l2cap_send if send-while-stalled - btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0 - utime: always invoke mp_hal_delay_ms when >= to 0ms - modbluetooth: clamp MTU values to 32->UINT16_MAX - nimble: allow modbluetooth binding to hook "sent HCI packet" - nimble: add "memory stalling" mechanism for l2cap_send - uasyncio: in open_connection use address info in socket creation - modujson: add support for dump/dumps separators keyword-argument - modlwip: fix close and clean up of UDP and raw sockets - modbluetooth: add send_update arg to gatts_write - add machine.bitstream - modframebuf: enable blit between different formats via a palette lib: - tinyusb: update to version 0.10.1 - pico-sdk: update to version 1.2.0 - utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient - axtls: switch to repo at micropython/axtls - axtls: update to latest axtls 2.1.5 wih additional commits - re1.5: move re1.5 code from extmod to lib - uzlib: move uzlib code from extmod to lib - crypto-algorithms: move crypto-algorithms code from extmod to lib - update README's based on contents of these dirs drivers: - neopixel: add common machine.bitstream-based neopixel module - neopixel: optimize fill() for speed - neopixel: reduce code size of driver - cyw43: fix cyw43_deinit so it can be called many times in a row - cyw43: make wifi join fail if interface is not active mpy-cross: - disable stack check when building with Emscripten Support components ================== docs: - library: document new esp32.RMT features and fix wait_done - library: warn that ustruct doesn't handle spaces in format strings - esp8266/tutorial: change flash mode from dio to dout - replace master/slave with controller/peripheral in I2C and SPI - rp2: enhance quickref and change image to Pico pinout - rp2: update general section to give a brief technical overview - library/utime.rst: clarify behaviour and precision of sleep ms/us - library/uasyncio.rst: document stream readexactly() method - library/machine.I2S.rst: fix use of sd pin in examples - zephyr: add quick reference for the Zephyr port - library/zephyr: add libraries specific to the Zephyr port - templates: add unix and zephyr quickref links to top-index - rename ufoo.rst to foo.rst - replace ufoo with foo in all docs - library/index.rst: clarify module naming and purpose - library/builtins.rst: add module title - library/network.rst: simplify socket import - add docs for machine.bitstream and neopixel module - library: fix usage of :term: for frozen module reference - esp8266: use monospace for software tools - reference: mention that slicing a memoryview causes allocation examples: no changes specific to this component/port tests: - extmod: make uasyncio_heaplock test more deterministic - cpydiff/modules_struct_whitespace_in_format: run black - extmod/ujson: add tests for dump/dumps separators argument - run-multitests.py: add broadcast and wait facility - multi_bluetooth/ble_subscribe.py: add test for subscription - extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks - basics: split f-string debug printing to separate file with .exp - pybnative: make while.py test run on boards without pyb.delay tools: - autobuild: add scripts to build release firmware - remove obsolete build-stm-latest.sh script - ci.sh: run apt-get update in ci_powerpc_setup - makemanifest.py: allow passing flags to mpy-tool.py - autobuild: add mimxrt port to build scripts for nightly builds - pyboard.py: add cmd-line option to make soft reset configurable - mpremote: swap order of PID and VID in connect-list output - ci.sh: build unix dev variant as part of macOS CI - ci.sh: build GENERIC_C3 board as part of esp32 CI - autobuild: use separate IDF version to build newer esp32 SoCs - autobuild: add FeatherS2 and TinyS2 to esp32 auto builds - mpremote: add seek whence for mounted files - mpremote: raise OSError on unsupported RemoteFile.seek - autobuild: add the MIMXRT1050_EVKB board to the daily builds - ci.sh: add mpy-cross build to nrf port - codeformat.py: include ports/nrf/modules/nrf in code formatting - gen-cpydiff.py: don't rename foo to ufoo in diff output - autobuild: add auto build for Silicognition wESP32 - mpremote: fix connect-list in case VID/PID are None - mpremote: add "devs" shortcut for "connect list" - mpremote: remove support for pyb.USB_VCP in/out specialisation - autobuild: don't use "-B" for make, it's already a fresh build - pyboard.py: move --no-exclusive/--soft-reset out of mutex group - pyboard.py: make --no-follow use same variable as --follow - pyboard.py: add --exclusive to match --no-exclusive - pyboard.py: make --no-soft-reset consistent with other args - uncrustify: force 1 newline at end of file - mpremote: bump version to 0.0.6 CI: - workflows: add workflow to build and test javascript port - workflows: switch from Coveralls to Codecov - workflows: switch from lcov to gcov - workflows: add workflow to build and test unix dev variant The ports ========= all ports: - use common mp_hal_stdout_tx_strn_cooked instead of custom one - update for move of crypto-algorithms, uzlib to lib - rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID bare-arm port: no changes specific to this component/port cc3200 port: no changes specific to this component/port esp8266 port: - add __len__ to NeoPixel driver to support iterating - Makefile: add more libm files to build - include hidden networks in WLAN.scan results - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream esp32 port: - boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM - add __len__ to NeoPixel driver to support iterating - main: allow MICROPY_DIR to be overridden - esp32_rmt: fix RMT looping in newer IDF versions - esp32_rmt: enhance RMT with idle_level and write_pulses modes - add new machine.I2S class for I2S protocol support - machine_spi: calculate actual attained baudrate - machine_hw_spi: use a 2 item SPI queue for long transfers - machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default - machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default - fix use of mp_int_t, size_t and uintptr_t - add initial support for ESP32C3 SoCs - boards/GENERIC_C3: add generic C3-based board - modmachine: release the GIL in machine.idle() - mphalport: always yield at least once in delay_ms - machine_uart: add flow kw-arg to enable hardware flow control - boards: add Silicognition wESP32 board configuration - mpconfigport.h: enable reverse and inplace special methods - include hidden networks in WLAN.scan results - makeimg.py: get bootloader and partition offset from sdkconfig - enable MICROPY_PY_FSTRINGS by default - machine_hw_spi: release GIL during transfers - machine_pin: make check for non-output pins respect chip variant - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream - boards: add GENERIC_C3_USB board with USB serial/JTAG support javascript port: - rework Makefile and GC so it works with latest Emscripten - Makefile: suppress compiler errors from array bounds - Makefile: change variable to EXPORTED_RUNTIME_METHODS mimxrt port: - move calc_weekday helper function to timeutils - machine_spi: add the SPI class to the machine module - moduos: seed the PRNG on boot using the TRNG - boards: set vfs partition start to 1 MBbyte - main: skip running main.py if boot.py failed - main: extend the information returned by help() - mimxrt_flash: remove commented-out code - modmachine: add a few minor methods to the machine module - machine_led: use mp_raise_msg_varg helper - machine_i2c: add hardware-based machine.I2C to machine module - add support for Hyperflash chips - boards: add support for the MIMXRT1050_EVKB board - machine_pin: implement ioctl for Pin minimal port: - Makefile: add support for building with user C modules nrf port: - modules: replace master/slave with controller/peripheral in SPI - boards/common.ld: calculate unused flash region - modules/nrf: add new nrf module with flash block device - drivers: add support for using flash block device with SoftDevice - mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set - README: update README.md to reflect internal file systems - mpconfigport.h: tune FAT FS configuration - Makefile: add _fs_size linker script override from make - modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2 - mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled - qstrdefsport.h: add entries for in-built FS mount points - main: add auto mount and auto format hook for internal flash FS - boards: enable needed features for FAT/LFS1/LFS2 - facilitate use of freeze manifest - boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets - modules/scripts: add file system formatting script - Makefile: set default manifest file for all targets - mphalport: add dummy function for mp_hal_time_ns() - boards: enable MICROPY_VFS_LFS2 for all target boards - modules/uos: add ilistdir to uos module - modules/nrf: add function to enable/disable DCDC - enable source line on tracebacks - set .mpy features consistent with documentation and other ports pic16bit port: no changes specific to this component/port powerpc port: no changes specific to this component/port qemu-arm port: no changes specific to this component/port rp2 port: - use 0=Monday datetime convention in RTC - machine_rtc: in RTC.datetime, compute weekday automatically - CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb - tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256 - machine_uart: add hardware flow control support - machine_uart: allow overriding default machine UART pins - machine_i2c: allow boards to configure I2C pins using new macros - machine_spi: allow boards to configure SPI pins using new macros - machine_uart: fix poll ioctl to also check hardware FIFO - machine_uart: fix read when FIFO has chars but ringbuf doesn't - tusb_port: allow boards to configure USB VID and PID - boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID - boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins - boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins - boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins - boards: add Adafruit ItsyBitsy RP2040 - boards: add Adafruit QT Py RP2040 - boards: add Pimoroni Pico LiPo 4MB - boards: add Pimoroni Pico LiPo 16MB - boards: add Pimoroni Tiny 2040 - CMakeLists.txt: allow a board's cmake to set the manifest path - enable MICROPY_PY_FSTRINGS by default - Makefile: add "submodules" target, to match other ports - rp2_flash: disable IRQs while calling flash_erase/program - CMakeLists.txt: add option to enable double tap reset to bootrom - mpconfigport.h: allow boards to add root pointers samd port: - add support for building with user C modules stm32 port: - softtimer: add soft_timer_reinsert() helper function - mpbthciport: change from systick to soft-timer for BT scheduling - provide a custom BTstack runloop that integrates with soft timer - usb: make irq's default trigger enable all events - boardctrl: skip running main.py if boot.py had an error - sdio: fix undefined reference to DMA stream on H7 - dma: add DMAMUX configuration for H7 to fix dma_nohal_init - main: call mp_deinit() at end of main - adc: allow using ADC12 and ADC3 for H7 - adc: define the ADC instance used for internal channels - adc: simplify and generalise how pin_adcX table is defined - add new machine.I2S class for I2S protocol support - boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet - replace master/slave with controller/peripheral in I2C and SPI - systick: always POLL_HOOK when delaying for milliseconds - sdram: make SDRAM test cache aware, and optional failure with msg - boards/NUCLEO_F446RE: enable CAN bus support - boards: add support for SparkFun STM32 MicroMod Processor board - uart: fix LPUART1 baudrate set/get - uart: support low baudrates on LPUART1 - boards/STM32F429DISC: set correct UART2 pins and add UART3/6 - boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI - boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6 - Makefile: update to only pull in used Bluetooth library - README.md: update supported MCUs, and submodule and mboot use - usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx - usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx - powerctrl: support changing frequency on WB MCUs - boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI - mbedtls: fix compile warning about uninitialized val - enable MICROPY_PY_FSTRINGS by default - add implementation of machine.bitstream - Makefile: allow GIT_SUBMODULES and LIBS to be extended - stm32_it: support TIM17 IRQs on WB MCUs - disable computed goto on constrained boards - storage: make extended-block-device more configurable - boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI - boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage - boards/LEGO_HUB_NO6: add make commands to backup/restore firmware teensy port: no changes specific to this component/port unix port: - modffi: add option to lock GC in callback, and cfun access - Makefile: add back LIB_SRC_C to list of object files - variants: enable help and help("modules") on standard and dev - Makefile: disable error compression on arm-linux-gnueabi-gcc windows port: - Makefile: add .exe extension to executables name - appveyor: update to VS 2017 and use Python 3.8 for build/test zephyr port: - machine_spi: add support for hardware SPI
2021-10-14 15:38:41 -04:00
msgid "raw f-strings are not supported"
locale: run 'make translate'
2020-03-09 09:19:46 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "real and imaginary parts must be of equal length"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/builtinimport.c
msgid "relative import"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr ""
make translate
2020-04-17 19:44:35 -04:00
#: shared-bindings/rgbmatrix/RGBMatrix.c
make translate
2020-04-14 19:25:21 -04:00
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
Translations
2021-02-23 19:32:16 -05:00
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "sampling rate out of range"
msgstr ""
#: py/modmicropython.c
Merge MicroPython 1.12 into CircuitPython
2021-04-23 15:26:42 -04:00
msgid "schedule queue full"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
Merge tag 'v1.17' into merge-1.17 F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board This release of MicroPython adds support for f-strings (PEP-498), with a few limitations compared to normal Python. F-strings are essentially syntactic sugar for "".format() and make formatting strings a lot more convenient. Other improvements to the core runtime include pretty printing OSError when it has two arguments (an errno code and a string), scheduling of KeyboardInterrupt on the main thread, and support for a single argument to the optimised form of StopIteration. In the machine module a new I2S class has been added, with support for esp32 and stm32 ports. This provides a consistent API for transmit and receive of audio data in blocking, non-blocking and asyncio-based operation. Also, the json module has support for the "separators" argument in the dump and dumps functions, and framebuf now includes a way to blit between frame buffers of different formats using a palette. A new, portable machine.bitstream function is also added which can output a stream of bits with configurable timing, and is used as the basis for driving WS2812 LEDs in a common way across ports. There has been some restructuring of the repository directory layout, with all third-party code now in the lib/ directory. And a new top-level directory shared/ has been added with first-party code that was previously in lib/ moved there. The docs have seen further improvement with enhancements and additions to the rp2 parts, as well as a new quick reference for the zephyr port. The terms master/slave have been replaced with controller/peripheral, mainly relating to I2C and SPI usage. And u-module references have been replaced with just the module name without the u-prefix to help clear up the intended usage of modules in MicroPython. For the esp8266 and esp32 ports, hidden networks are now included in WLAN scan results. On the esp32 the RMT class is enhanced with idle_level and write_pulses modes. There is initial support for ESP32-C3 chips with GENERIC_C3 and GENERIC_C3_USB boards. The javascript port has had its Makefile and garbage collector implementation reworked so it compiles and runs with latest the Emscripten using asyncify. The mimxrt port sees the addition of hardware I2C and SPI support, as well as some additional methods to the machine module. There is also support for Hyperflash chips. The nrf port now has full VFS storage support, enables source-line on traceback, and has .mpy features consistent with other ports. For the rp2 port there is now more configurability for boards, and more boards added. The stm32 port has a new LEGO_HUB_NO6 board definition with detailed information how to get this LEGO Hub running stock MicroPython. There is also now support to change the CPU frequency on STM32WB MCUs. And USBD_xxx descriptor options have been renamed to MICROPY_HW_USB_xxx. Thanks to everyone who contributed to this release: Amir Gonnen, Andrew Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki, David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar, Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur, oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum, Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt. What follows is a detailed list of changes, generated from the git commit history, and organised into sections. Main components =============== all: - fix signed shifts and NULL access errors from -fsanitize=undefined - update to point to files in new shared/ directory py core: - mpstate: make exceptions thread-local - mpstate: schedule KeyboardInterrupt on main thread - mperrno: add MP_ECANCELED error code - makeqstrdefs.py: don't include .h files explicitly in preprocessing - mark unused arguments from bytecode decoding macros - objexcept: pretty print OSError also when it has 2 arguments - makeversionhdr: add --tags arg to git describe - vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode - objexcept: make mp_obj_exception_get_value support subclassed excs - support single argument to optimised MP_OBJ_STOP_ITERATION - introduce and use mp_raise_type_arg helper - modsys: optimise sys.exit for code size by using exception helpers - objexcept: make mp_obj_new_exception_arg1 inline - obj: fix formatting of comment for mp_obj_is_integer - emitnative: reuse need_reg_all func in need_stack_settled - emitnative: ensure stack settling is safe mid-branch - runtime: fix bool unary op for subclasses of native types - builtinimport: fix condition for including do_execute_raw_code() - mkrules: automatically build mpy-cross if it doesn't exist - implement partial PEP-498 (f-string) support - lexer: clear fstring_args vstr on lexer free - mkrules.mk: do submodule sync in "make submodules" extmod: - btstack: add missing call to mp_bluetooth_hci_uart_deinit - btstack: check that BLE is active before performing operations - uasyncio: get addr and bind server socket before creating task - axtls-include: add axtls_os_port.h to customise axTLS - update for move of crypto-algorithms, re1.5, uzlib to lib - moduselect: conditionally compile select() - nimble: fix leak in l2cap_send if send-while-stalled - btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0 - utime: always invoke mp_hal_delay_ms when >= to 0ms - modbluetooth: clamp MTU values to 32->UINT16_MAX - nimble: allow modbluetooth binding to hook "sent HCI packet" - nimble: add "memory stalling" mechanism for l2cap_send - uasyncio: in open_connection use address info in socket creation - modujson: add support for dump/dumps separators keyword-argument - modlwip: fix close and clean up of UDP and raw sockets - modbluetooth: add send_update arg to gatts_write - add machine.bitstream - modframebuf: enable blit between different formats via a palette lib: - tinyusb: update to version 0.10.1 - pico-sdk: update to version 1.2.0 - utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient - axtls: switch to repo at micropython/axtls - axtls: update to latest axtls 2.1.5 wih additional commits - re1.5: move re1.5 code from extmod to lib - uzlib: move uzlib code from extmod to lib - crypto-algorithms: move crypto-algorithms code from extmod to lib - update README's based on contents of these dirs drivers: - neopixel: add common machine.bitstream-based neopixel module - neopixel: optimize fill() for speed - neopixel: reduce code size of driver - cyw43: fix cyw43_deinit so it can be called many times in a row - cyw43: make wifi join fail if interface is not active mpy-cross: - disable stack check when building with Emscripten Support components ================== docs: - library: document new esp32.RMT features and fix wait_done - library: warn that ustruct doesn't handle spaces in format strings - esp8266/tutorial: change flash mode from dio to dout - replace master/slave with controller/peripheral in I2C and SPI - rp2: enhance quickref and change image to Pico pinout - rp2: update general section to give a brief technical overview - library/utime.rst: clarify behaviour and precision of sleep ms/us - library/uasyncio.rst: document stream readexactly() method - library/machine.I2S.rst: fix use of sd pin in examples - zephyr: add quick reference for the Zephyr port - library/zephyr: add libraries specific to the Zephyr port - templates: add unix and zephyr quickref links to top-index - rename ufoo.rst to foo.rst - replace ufoo with foo in all docs - library/index.rst: clarify module naming and purpose - library/builtins.rst: add module title - library/network.rst: simplify socket import - add docs for machine.bitstream and neopixel module - library: fix usage of :term: for frozen module reference - esp8266: use monospace for software tools - reference: mention that slicing a memoryview causes allocation examples: no changes specific to this component/port tests: - extmod: make uasyncio_heaplock test more deterministic - cpydiff/modules_struct_whitespace_in_format: run black - extmod/ujson: add tests for dump/dumps separators argument - run-multitests.py: add broadcast and wait facility - multi_bluetooth/ble_subscribe.py: add test for subscription - extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks - basics: split f-string debug printing to separate file with .exp - pybnative: make while.py test run on boards without pyb.delay tools: - autobuild: add scripts to build release firmware - remove obsolete build-stm-latest.sh script - ci.sh: run apt-get update in ci_powerpc_setup - makemanifest.py: allow passing flags to mpy-tool.py - autobuild: add mimxrt port to build scripts for nightly builds - pyboard.py: add cmd-line option to make soft reset configurable - mpremote: swap order of PID and VID in connect-list output - ci.sh: build unix dev variant as part of macOS CI - ci.sh: build GENERIC_C3 board as part of esp32 CI - autobuild: use separate IDF version to build newer esp32 SoCs - autobuild: add FeatherS2 and TinyS2 to esp32 auto builds - mpremote: add seek whence for mounted files - mpremote: raise OSError on unsupported RemoteFile.seek - autobuild: add the MIMXRT1050_EVKB board to the daily builds - ci.sh: add mpy-cross build to nrf port - codeformat.py: include ports/nrf/modules/nrf in code formatting - gen-cpydiff.py: don't rename foo to ufoo in diff output - autobuild: add auto build for Silicognition wESP32 - mpremote: fix connect-list in case VID/PID are None - mpremote: add "devs" shortcut for "connect list" - mpremote: remove support for pyb.USB_VCP in/out specialisation - autobuild: don't use "-B" for make, it's already a fresh build - pyboard.py: move --no-exclusive/--soft-reset out of mutex group - pyboard.py: make --no-follow use same variable as --follow - pyboard.py: add --exclusive to match --no-exclusive - pyboard.py: make --no-soft-reset consistent with other args - uncrustify: force 1 newline at end of file - mpremote: bump version to 0.0.6 CI: - workflows: add workflow to build and test javascript port - workflows: switch from Coveralls to Codecov - workflows: switch from lcov to gcov - workflows: add workflow to build and test unix dev variant The ports ========= all ports: - use common mp_hal_stdout_tx_strn_cooked instead of custom one - update for move of crypto-algorithms, uzlib to lib - rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID bare-arm port: no changes specific to this component/port cc3200 port: no changes specific to this component/port esp8266 port: - add __len__ to NeoPixel driver to support iterating - Makefile: add more libm files to build - include hidden networks in WLAN.scan results - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream esp32 port: - boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM - add __len__ to NeoPixel driver to support iterating - main: allow MICROPY_DIR to be overridden - esp32_rmt: fix RMT looping in newer IDF versions - esp32_rmt: enhance RMT with idle_level and write_pulses modes - add new machine.I2S class for I2S protocol support - machine_spi: calculate actual attained baudrate - machine_hw_spi: use a 2 item SPI queue for long transfers - machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default - machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default - fix use of mp_int_t, size_t and uintptr_t - add initial support for ESP32C3 SoCs - boards/GENERIC_C3: add generic C3-based board - modmachine: release the GIL in machine.idle() - mphalport: always yield at least once in delay_ms - machine_uart: add flow kw-arg to enable hardware flow control - boards: add Silicognition wESP32 board configuration - mpconfigport.h: enable reverse and inplace special methods - include hidden networks in WLAN.scan results - makeimg.py: get bootloader and partition offset from sdkconfig - enable MICROPY_PY_FSTRINGS by default - machine_hw_spi: release GIL during transfers - machine_pin: make check for non-output pins respect chip variant - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream - boards: add GENERIC_C3_USB board with USB serial/JTAG support javascript port: - rework Makefile and GC so it works with latest Emscripten - Makefile: suppress compiler errors from array bounds - Makefile: change variable to EXPORTED_RUNTIME_METHODS mimxrt port: - move calc_weekday helper function to timeutils - machine_spi: add the SPI class to the machine module - moduos: seed the PRNG on boot using the TRNG - boards: set vfs partition start to 1 MBbyte - main: skip running main.py if boot.py failed - main: extend the information returned by help() - mimxrt_flash: remove commented-out code - modmachine: add a few minor methods to the machine module - machine_led: use mp_raise_msg_varg helper - machine_i2c: add hardware-based machine.I2C to machine module - add support for Hyperflash chips - boards: add support for the MIMXRT1050_EVKB board - machine_pin: implement ioctl for Pin minimal port: - Makefile: add support for building with user C modules nrf port: - modules: replace master/slave with controller/peripheral in SPI - boards/common.ld: calculate unused flash region - modules/nrf: add new nrf module with flash block device - drivers: add support for using flash block device with SoftDevice - mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set - README: update README.md to reflect internal file systems - mpconfigport.h: tune FAT FS configuration - Makefile: add _fs_size linker script override from make - modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2 - mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled - qstrdefsport.h: add entries for in-built FS mount points - main: add auto mount and auto format hook for internal flash FS - boards: enable needed features for FAT/LFS1/LFS2 - facilitate use of freeze manifest - boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets - modules/scripts: add file system formatting script - Makefile: set default manifest file for all targets - mphalport: add dummy function for mp_hal_time_ns() - boards: enable MICROPY_VFS_LFS2 for all target boards - modules/uos: add ilistdir to uos module - modules/nrf: add function to enable/disable DCDC - enable source line on tracebacks - set .mpy features consistent with documentation and other ports pic16bit port: no changes specific to this component/port powerpc port: no changes specific to this component/port qemu-arm port: no changes specific to this component/port rp2 port: - use 0=Monday datetime convention in RTC - machine_rtc: in RTC.datetime, compute weekday automatically - CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb - tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256 - machine_uart: add hardware flow control support - machine_uart: allow overriding default machine UART pins - machine_i2c: allow boards to configure I2C pins using new macros - machine_spi: allow boards to configure SPI pins using new macros - machine_uart: fix poll ioctl to also check hardware FIFO - machine_uart: fix read when FIFO has chars but ringbuf doesn't - tusb_port: allow boards to configure USB VID and PID - boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID - boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins - boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins - boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins - boards: add Adafruit ItsyBitsy RP2040 - boards: add Adafruit QT Py RP2040 - boards: add Pimoroni Pico LiPo 4MB - boards: add Pimoroni Pico LiPo 16MB - boards: add Pimoroni Tiny 2040 - CMakeLists.txt: allow a board's cmake to set the manifest path - enable MICROPY_PY_FSTRINGS by default - Makefile: add "submodules" target, to match other ports - rp2_flash: disable IRQs while calling flash_erase/program - CMakeLists.txt: add option to enable double tap reset to bootrom - mpconfigport.h: allow boards to add root pointers samd port: - add support for building with user C modules stm32 port: - softtimer: add soft_timer_reinsert() helper function - mpbthciport: change from systick to soft-timer for BT scheduling - provide a custom BTstack runloop that integrates with soft timer - usb: make irq's default trigger enable all events - boardctrl: skip running main.py if boot.py had an error - sdio: fix undefined reference to DMA stream on H7 - dma: add DMAMUX configuration for H7 to fix dma_nohal_init - main: call mp_deinit() at end of main - adc: allow using ADC12 and ADC3 for H7 - adc: define the ADC instance used for internal channels - adc: simplify and generalise how pin_adcX table is defined - add new machine.I2S class for I2S protocol support - boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet - replace master/slave with controller/peripheral in I2C and SPI - systick: always POLL_HOOK when delaying for milliseconds - sdram: make SDRAM test cache aware, and optional failure with msg - boards/NUCLEO_F446RE: enable CAN bus support - boards: add support for SparkFun STM32 MicroMod Processor board - uart: fix LPUART1 baudrate set/get - uart: support low baudrates on LPUART1 - boards/STM32F429DISC: set correct UART2 pins and add UART3/6 - boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI - boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6 - Makefile: update to only pull in used Bluetooth library - README.md: update supported MCUs, and submodule and mboot use - usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx - usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx - powerctrl: support changing frequency on WB MCUs - boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI - mbedtls: fix compile warning about uninitialized val - enable MICROPY_PY_FSTRINGS by default - add implementation of machine.bitstream - Makefile: allow GIT_SUBMODULES and LIBS to be extended - stm32_it: support TIM17 IRQs on WB MCUs - disable computed goto on constrained boards - storage: make extended-block-device more configurable - boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI - boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage - boards/LEGO_HUB_NO6: add make commands to backup/restore firmware teensy port: no changes specific to this component/port unix port: - modffi: add option to lock GC in callback, and cfun access - Makefile: add back LIB_SRC_C to list of object files - variants: enable help and help("modules") on standard and dev - Makefile: disable error compression on arm-linux-gnueabi-gcc windows port: - Makefile: add .exe extension to executables name - appveyor: update to VS 2017 and use Python 3.8 for build/test zephyr port: - machine_spi: add support for hardware SPI
2021-10-14 15:38:41 -04:00
#: py/builtinimport.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "script compilation not supported"
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/nativeglue.c
msgid "set unsupported"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "shape must be integer or tuple of integers"
msgstr ""
added //| to (hopefully) get CI to pass
2021-01-05 14:17:09 -05:00
#: shared-module/msgpack/__init__.c
msgid "short read"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr ""
#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ulab_tools.c
msgid "size is defined for ndarrays only"
msgstr ""
WIP: redo API; not compiled yet
2020-11-18 20:44:34 -05:00
#: shared-bindings/time/__init__.c
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
msgid "sleep length must be non-negative"
Fix output overflow and make help translatable
2018-11-09 19:41:08 -05:00
msgstr ""
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
#: py/nativeglue.c
msgid "slice unsupported"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr ""
changed alarm.time API
2020-11-25 15:07:57 -05:00
#: main.c
msgid "soft reboot\n"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos[:, 3] should be all ones"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sosfilt requires iterable arguments"
msgstr ""
Align fatfs window buffer for tinyusb Also, update tinyusb.
2023-07-27 12:15:58 -04:00
#: shared-bindings/bitmaptools/__init__.c
shorten error strings
2020-08-21 22:40:46 -04:00
msgid "source palette too large"
msgstr ""
bitmaptools: add dither This can convert a BGR565_SWAPPED bitmap to B&W in about 82ms on esp32-s2.
2021-10-29 15:01:47 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 2 or 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 8"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modre.c
update translations
2023-09-20 12:08:50 -04:00
msgid "splitting with sub-captures"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
msgid "start/end indices"
msgstr ""
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
Fix output overflow and make help translatable
2018-11-09 19:41:08 -05:00
msgstr ""
add getpass module
2021-08-08 05:45:15 -04:00
#: py/stream.c shared-bindings/getpass/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "stream operation not supported"
msgstr ""
update translations
2023-09-20 12:08:50 -04:00
#: py/objarray.c py/objstr.c
msgid "string argument without an encoding"
msgstr ""
#: py/objstrunicode.c
msgid "string index out of range"
msgstr ""
#: py/objstrunicode.c
#, c-format
msgid "string indices must be integers, not %s"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: extmod/moductypes.c
Merge MicroPython 1.13 into CircuitPython
2021-05-04 14:40:55 -04:00
msgid "struct: can't index"
msgstr ""
#: extmod/moductypes.c
msgid "struct: index out of range"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: extmod/moductypes.c
msgid "struct: no fields"
msgstr ""
Update translations
2020-07-17 21:03:52 -04:00
#: py/objarray.c py/objstr.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "substring not found"
msgstr ""
#: py/compile.c
msgid "super() can't find self"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modjson.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "syntax error in JSON"
msgstr ""
#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/modtime.c
update translations
2023-09-20 12:08:50 -04:00
msgid "ticks interval overflow"
msgstr ""
locale: generate strings for watchdog timer Run `make translate` to generate strings for `shared-bindings/watchdog`. Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-26 23:38:38 -04:00
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
make translate again
2020-12-23 22:52:27 -05:00
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "timeout must be < 655.35 secs"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "timeout waiting for v1 card"
msgstr ""
shorten error strings
2020-08-21 22:40:46 -04:00
#: shared-module/sdcardio/SDCard.c
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.
2020-05-06 12:04:53 -04:00
msgid "timeout waiting for v2 card"
msgstr ""
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "timer re-init"
msgstr ""
Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.
2019-03-02 06:19:47 -05:00
#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
Properly calculate BPP for displayio.Bitmap Fix #1669
2019-03-20 14:29:20 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/compile.c
msgid "too many args"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c
msgid "too many dimensions"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""
Merge MicroPython 1.14 into CircuitPython
2021-05-10 18:20:47 -04:00
#: py/asmthumb.c
msgid "too many locals for native method"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D iterables"
msgstr ""
pre-commit fixes
2023-08-14 00:47:22 -04:00
#: py/obj.c
msgid "tuple/list has wrong length"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/CAN.c
make translate
2020-10-21 12:30:33 -04:00
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/canio/CAN.c
make translate
2020-10-21 12:30:33 -04:00
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""
make translate
2020-09-21 17:45:51 -04:00
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "tx and rx cannot both be None"
msgstr ""
#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr ""
#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr ""
Merge remote-tracking branch 'origin/8.2.x' into merge-82x
2023-08-22 09:49:16 -04:00
#: py/runtime.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "type object '%q' has no attribute '%q'"
msgstr ""
#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr ""
#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr ""
#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr ""
#: py/parse.c
msgid "unexpected indent"
msgstr ""
#: py/bc.c
msgid "unexpected keyword argument"
msgstr ""
Update ADC and I2S APIs for 5.1 This fixes ESP32 because the BufferedIn used the old ADC API and I2S did too indirectly. Fixes #8429
2023-09-26 14:53:01 -04:00
#: py/argcheck.c py/bc.c py/objnamedtuple.c
#: shared-bindings/traceback/__init__.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "unexpected keyword argument '%q'"
msgstr ""
#: py/lexer.c
msgid "unicode name escapes"
msgstr ""
#: py/parse.c
Merge tag 'v1.17' into merge-1.17 F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board This release of MicroPython adds support for f-strings (PEP-498), with a few limitations compared to normal Python. F-strings are essentially syntactic sugar for "".format() and make formatting strings a lot more convenient. Other improvements to the core runtime include pretty printing OSError when it has two arguments (an errno code and a string), scheduling of KeyboardInterrupt on the main thread, and support for a single argument to the optimised form of StopIteration. In the machine module a new I2S class has been added, with support for esp32 and stm32 ports. This provides a consistent API for transmit and receive of audio data in blocking, non-blocking and asyncio-based operation. Also, the json module has support for the "separators" argument in the dump and dumps functions, and framebuf now includes a way to blit between frame buffers of different formats using a palette. A new, portable machine.bitstream function is also added which can output a stream of bits with configurable timing, and is used as the basis for driving WS2812 LEDs in a common way across ports. There has been some restructuring of the repository directory layout, with all third-party code now in the lib/ directory. And a new top-level directory shared/ has been added with first-party code that was previously in lib/ moved there. The docs have seen further improvement with enhancements and additions to the rp2 parts, as well as a new quick reference for the zephyr port. The terms master/slave have been replaced with controller/peripheral, mainly relating to I2C and SPI usage. And u-module references have been replaced with just the module name without the u-prefix to help clear up the intended usage of modules in MicroPython. For the esp8266 and esp32 ports, hidden networks are now included in WLAN scan results. On the esp32 the RMT class is enhanced with idle_level and write_pulses modes. There is initial support for ESP32-C3 chips with GENERIC_C3 and GENERIC_C3_USB boards. The javascript port has had its Makefile and garbage collector implementation reworked so it compiles and runs with latest the Emscripten using asyncify. The mimxrt port sees the addition of hardware I2C and SPI support, as well as some additional methods to the machine module. There is also support for Hyperflash chips. The nrf port now has full VFS storage support, enables source-line on traceback, and has .mpy features consistent with other ports. For the rp2 port there is now more configurability for boards, and more boards added. The stm32 port has a new LEGO_HUB_NO6 board definition with detailed information how to get this LEGO Hub running stock MicroPython. There is also now support to change the CPU frequency on STM32WB MCUs. And USBD_xxx descriptor options have been renamed to MICROPY_HW_USB_xxx. Thanks to everyone who contributed to this release: Amir Gonnen, Andrew Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki, David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar, Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur, oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum, Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt. What follows is a detailed list of changes, generated from the git commit history, and organised into sections. Main components =============== all: - fix signed shifts and NULL access errors from -fsanitize=undefined - update to point to files in new shared/ directory py core: - mpstate: make exceptions thread-local - mpstate: schedule KeyboardInterrupt on main thread - mperrno: add MP_ECANCELED error code - makeqstrdefs.py: don't include .h files explicitly in preprocessing - mark unused arguments from bytecode decoding macros - objexcept: pretty print OSError also when it has 2 arguments - makeversionhdr: add --tags arg to git describe - vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode - objexcept: make mp_obj_exception_get_value support subclassed excs - support single argument to optimised MP_OBJ_STOP_ITERATION - introduce and use mp_raise_type_arg helper - modsys: optimise sys.exit for code size by using exception helpers - objexcept: make mp_obj_new_exception_arg1 inline - obj: fix formatting of comment for mp_obj_is_integer - emitnative: reuse need_reg_all func in need_stack_settled - emitnative: ensure stack settling is safe mid-branch - runtime: fix bool unary op for subclasses of native types - builtinimport: fix condition for including do_execute_raw_code() - mkrules: automatically build mpy-cross if it doesn't exist - implement partial PEP-498 (f-string) support - lexer: clear fstring_args vstr on lexer free - mkrules.mk: do submodule sync in "make submodules" extmod: - btstack: add missing call to mp_bluetooth_hci_uart_deinit - btstack: check that BLE is active before performing operations - uasyncio: get addr and bind server socket before creating task - axtls-include: add axtls_os_port.h to customise axTLS - update for move of crypto-algorithms, re1.5, uzlib to lib - moduselect: conditionally compile select() - nimble: fix leak in l2cap_send if send-while-stalled - btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0 - utime: always invoke mp_hal_delay_ms when >= to 0ms - modbluetooth: clamp MTU values to 32->UINT16_MAX - nimble: allow modbluetooth binding to hook "sent HCI packet" - nimble: add "memory stalling" mechanism for l2cap_send - uasyncio: in open_connection use address info in socket creation - modujson: add support for dump/dumps separators keyword-argument - modlwip: fix close and clean up of UDP and raw sockets - modbluetooth: add send_update arg to gatts_write - add machine.bitstream - modframebuf: enable blit between different formats via a palette lib: - tinyusb: update to version 0.10.1 - pico-sdk: update to version 1.2.0 - utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient - axtls: switch to repo at micropython/axtls - axtls: update to latest axtls 2.1.5 wih additional commits - re1.5: move re1.5 code from extmod to lib - uzlib: move uzlib code from extmod to lib - crypto-algorithms: move crypto-algorithms code from extmod to lib - update README's based on contents of these dirs drivers: - neopixel: add common machine.bitstream-based neopixel module - neopixel: optimize fill() for speed - neopixel: reduce code size of driver - cyw43: fix cyw43_deinit so it can be called many times in a row - cyw43: make wifi join fail if interface is not active mpy-cross: - disable stack check when building with Emscripten Support components ================== docs: - library: document new esp32.RMT features and fix wait_done - library: warn that ustruct doesn't handle spaces in format strings - esp8266/tutorial: change flash mode from dio to dout - replace master/slave with controller/peripheral in I2C and SPI - rp2: enhance quickref and change image to Pico pinout - rp2: update general section to give a brief technical overview - library/utime.rst: clarify behaviour and precision of sleep ms/us - library/uasyncio.rst: document stream readexactly() method - library/machine.I2S.rst: fix use of sd pin in examples - zephyr: add quick reference for the Zephyr port - library/zephyr: add libraries specific to the Zephyr port - templates: add unix and zephyr quickref links to top-index - rename ufoo.rst to foo.rst - replace ufoo with foo in all docs - library/index.rst: clarify module naming and purpose - library/builtins.rst: add module title - library/network.rst: simplify socket import - add docs for machine.bitstream and neopixel module - library: fix usage of :term: for frozen module reference - esp8266: use monospace for software tools - reference: mention that slicing a memoryview causes allocation examples: no changes specific to this component/port tests: - extmod: make uasyncio_heaplock test more deterministic - cpydiff/modules_struct_whitespace_in_format: run black - extmod/ujson: add tests for dump/dumps separators argument - run-multitests.py: add broadcast and wait facility - multi_bluetooth/ble_subscribe.py: add test for subscription - extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks - basics: split f-string debug printing to separate file with .exp - pybnative: make while.py test run on boards without pyb.delay tools: - autobuild: add scripts to build release firmware - remove obsolete build-stm-latest.sh script - ci.sh: run apt-get update in ci_powerpc_setup - makemanifest.py: allow passing flags to mpy-tool.py - autobuild: add mimxrt port to build scripts for nightly builds - pyboard.py: add cmd-line option to make soft reset configurable - mpremote: swap order of PID and VID in connect-list output - ci.sh: build unix dev variant as part of macOS CI - ci.sh: build GENERIC_C3 board as part of esp32 CI - autobuild: use separate IDF version to build newer esp32 SoCs - autobuild: add FeatherS2 and TinyS2 to esp32 auto builds - mpremote: add seek whence for mounted files - mpremote: raise OSError on unsupported RemoteFile.seek - autobuild: add the MIMXRT1050_EVKB board to the daily builds - ci.sh: add mpy-cross build to nrf port - codeformat.py: include ports/nrf/modules/nrf in code formatting - gen-cpydiff.py: don't rename foo to ufoo in diff output - autobuild: add auto build for Silicognition wESP32 - mpremote: fix connect-list in case VID/PID are None - mpremote: add "devs" shortcut for "connect list" - mpremote: remove support for pyb.USB_VCP in/out specialisation - autobuild: don't use "-B" for make, it's already a fresh build - pyboard.py: move --no-exclusive/--soft-reset out of mutex group - pyboard.py: make --no-follow use same variable as --follow - pyboard.py: add --exclusive to match --no-exclusive - pyboard.py: make --no-soft-reset consistent with other args - uncrustify: force 1 newline at end of file - mpremote: bump version to 0.0.6 CI: - workflows: add workflow to build and test javascript port - workflows: switch from Coveralls to Codecov - workflows: switch from lcov to gcov - workflows: add workflow to build and test unix dev variant The ports ========= all ports: - use common mp_hal_stdout_tx_strn_cooked instead of custom one - update for move of crypto-algorithms, uzlib to lib - rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID bare-arm port: no changes specific to this component/port cc3200 port: no changes specific to this component/port esp8266 port: - add __len__ to NeoPixel driver to support iterating - Makefile: add more libm files to build - include hidden networks in WLAN.scan results - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream esp32 port: - boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM - add __len__ to NeoPixel driver to support iterating - main: allow MICROPY_DIR to be overridden - esp32_rmt: fix RMT looping in newer IDF versions - esp32_rmt: enhance RMT with idle_level and write_pulses modes - add new machine.I2S class for I2S protocol support - machine_spi: calculate actual attained baudrate - machine_hw_spi: use a 2 item SPI queue for long transfers - machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default - machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default - fix use of mp_int_t, size_t and uintptr_t - add initial support for ESP32C3 SoCs - boards/GENERIC_C3: add generic C3-based board - modmachine: release the GIL in machine.idle() - mphalport: always yield at least once in delay_ms - machine_uart: add flow kw-arg to enable hardware flow control - boards: add Silicognition wESP32 board configuration - mpconfigport.h: enable reverse and inplace special methods - include hidden networks in WLAN.scan results - makeimg.py: get bootloader and partition offset from sdkconfig - enable MICROPY_PY_FSTRINGS by default - machine_hw_spi: release GIL during transfers - machine_pin: make check for non-output pins respect chip variant - replace esp.neopixel with machine.bitstream - remove dead code for end_ticks in machine_bitstream - boards: add GENERIC_C3_USB board with USB serial/JTAG support javascript port: - rework Makefile and GC so it works with latest Emscripten - Makefile: suppress compiler errors from array bounds - Makefile: change variable to EXPORTED_RUNTIME_METHODS mimxrt port: - move calc_weekday helper function to timeutils - machine_spi: add the SPI class to the machine module - moduos: seed the PRNG on boot using the TRNG - boards: set vfs partition start to 1 MBbyte - main: skip running main.py if boot.py failed - main: extend the information returned by help() - mimxrt_flash: remove commented-out code - modmachine: add a few minor methods to the machine module - machine_led: use mp_raise_msg_varg helper - machine_i2c: add hardware-based machine.I2C to machine module - add support for Hyperflash chips - boards: add support for the MIMXRT1050_EVKB board - machine_pin: implement ioctl for Pin minimal port: - Makefile: add support for building with user C modules nrf port: - modules: replace master/slave with controller/peripheral in SPI - boards/common.ld: calculate unused flash region - modules/nrf: add new nrf module with flash block device - drivers: add support for using flash block device with SoftDevice - mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set - README: update README.md to reflect internal file systems - mpconfigport.h: tune FAT FS configuration - Makefile: add _fs_size linker script override from make - modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2 - mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled - qstrdefsport.h: add entries for in-built FS mount points - main: add auto mount and auto format hook for internal flash FS - boards: enable needed features for FAT/LFS1/LFS2 - facilitate use of freeze manifest - boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets - modules/scripts: add file system formatting script - Makefile: set default manifest file for all targets - mphalport: add dummy function for mp_hal_time_ns() - boards: enable MICROPY_VFS_LFS2 for all target boards - modules/uos: add ilistdir to uos module - modules/nrf: add function to enable/disable DCDC - enable source line on tracebacks - set .mpy features consistent with documentation and other ports pic16bit port: no changes specific to this component/port powerpc port: no changes specific to this component/port qemu-arm port: no changes specific to this component/port rp2 port: - use 0=Monday datetime convention in RTC - machine_rtc: in RTC.datetime, compute weekday automatically - CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb - tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256 - machine_uart: add hardware flow control support - machine_uart: allow overriding default machine UART pins - machine_i2c: allow boards to configure I2C pins using new macros - machine_spi: allow boards to configure SPI pins using new macros - machine_uart: fix poll ioctl to also check hardware FIFO - machine_uart: fix read when FIFO has chars but ringbuf doesn't - tusb_port: allow boards to configure USB VID and PID - boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID - boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins - boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins - boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins - boards: add Adafruit ItsyBitsy RP2040 - boards: add Adafruit QT Py RP2040 - boards: add Pimoroni Pico LiPo 4MB - boards: add Pimoroni Pico LiPo 16MB - boards: add Pimoroni Tiny 2040 - CMakeLists.txt: allow a board's cmake to set the manifest path - enable MICROPY_PY_FSTRINGS by default - Makefile: add "submodules" target, to match other ports - rp2_flash: disable IRQs while calling flash_erase/program - CMakeLists.txt: add option to enable double tap reset to bootrom - mpconfigport.h: allow boards to add root pointers samd port: - add support for building with user C modules stm32 port: - softtimer: add soft_timer_reinsert() helper function - mpbthciport: change from systick to soft-timer for BT scheduling - provide a custom BTstack runloop that integrates with soft timer - usb: make irq's default trigger enable all events - boardctrl: skip running main.py if boot.py had an error - sdio: fix undefined reference to DMA stream on H7 - dma: add DMAMUX configuration for H7 to fix dma_nohal_init - main: call mp_deinit() at end of main - adc: allow using ADC12 and ADC3 for H7 - adc: define the ADC instance used for internal channels - adc: simplify and generalise how pin_adcX table is defined - add new machine.I2S class for I2S protocol support - boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet - replace master/slave with controller/peripheral in I2C and SPI - systick: always POLL_HOOK when delaying for milliseconds - sdram: make SDRAM test cache aware, and optional failure with msg - boards/NUCLEO_F446RE: enable CAN bus support - boards: add support for SparkFun STM32 MicroMod Processor board - uart: fix LPUART1 baudrate set/get - uart: support low baudrates on LPUART1 - boards/STM32F429DISC: set correct UART2 pins and add UART3/6 - boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI - boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6 - Makefile: update to only pull in used Bluetooth library - README.md: update supported MCUs, and submodule and mboot use - usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx - usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx - powerctrl: support changing frequency on WB MCUs - boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI - mbedtls: fix compile warning about uninitialized val - enable MICROPY_PY_FSTRINGS by default - add implementation of machine.bitstream - Makefile: allow GIT_SUBMODULES and LIBS to be extended - stm32_it: support TIM17 IRQs on WB MCUs - disable computed goto on constrained boards - storage: make extended-block-device more configurable - boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI - boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage - boards/LEGO_HUB_NO6: add make commands to backup/restore firmware teensy port: no changes specific to this component/port unix port: - modffi: add option to lock GC in callback, and cfun access - Makefile: add back LIB_SRC_C to list of object files - variants: enable help and help("modules") on standard and dev - Makefile: disable error compression on arm-linux-gnueabi-gcc windows port: - Makefile: add .exe extension to executables name - appveyor: update to VS 2017 and use Python 3.8 for build/test zephyr port: - machine_spi: add support for hardware SPI
2021-10-14 15:38:41 -04:00
msgid "unindent doesn't match any outer indent level"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr ""
#: py/objstr.c
make translate
2020-08-04 14:58:43 -04:00
msgid "unknown format code '%c' for object of type '%q'"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/compile.c
msgid "unknown type"
msgstr ""
Merge MicroPython 1.10 into CircuitPython
2021-04-20 21:04:23 -04:00
#: py/compile.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "unknown type '%q'"
msgstr ""
#: py/objstr.c
Simplify argument checking to reduce translated strings Build size on proxlight trinkey m0 en_US: Before: 2412 (en_US) 820 (ru) After: 2544 (en_US) 984 (ru) Savings: +132 (en_US) +164 (ru) bytes available flash
2022-11-07 10:47:56 -05:00
#, c-format
msgid "unmatched '%c' in format"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr ""
translations for polygon
2020-05-18 16:33:16 -04:00
#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
Typos
2019-04-11 07:50:02 -04:00
msgid "unsupported %q type"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr ""
#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr ""
Implement gifio.GifWriter This involves: * Adding a new "L8" colorspace for colorconverters * factoring out displayio_colorconverter_convert_pixel * Making a minimal "colorspace only" version of displayio for the unix port (testing purposes) * fixing an error message I only tested writing B&W animated images, with the following script: ```python import displayio import gifio with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g: for i in range(0, 256, 14): data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32 print("add_frame") g.add_frame(data) # expected to raise an error, buffer is not big enough with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g: g.add_frame(bytes([3,3,3])) ```
2021-10-21 12:45:11 -04:00
#: shared-module/gifio/GifWriter.c
msgid "unsupported colorspace for GifWriter"
msgstr ""
bitmaptools: add dither This can convert a BGR565_SWAPPED bitmap to B&W in about 82ms on esp32-s2.
2021-10-29 15:01:47 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "unsupported colorspace for dither"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr ""
#: py/runtime.c
Fix tests and update translations
2023-10-20 19:56:30 -04:00
msgid "unsupported type for %q: '%s'"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
#: py/runtime.c
msgid "unsupported type for operator"
msgstr ""
#: py/runtime.c
make translate
2020-08-04 14:58:43 -04:00
msgid "unsupported types for %q: '%q', '%q'"
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols is too high"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols keyword must be specified"
msgstr ""
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""
code format and translations
2021-08-13 11:13:38 -04:00
#: shared-bindings/bitmaptools/__init__.c
msgid "value out of range of target"
msgstr ""
Fix tests and update translations
2023-10-20 19:56:30 -04:00
#: extmod/moddeflate.c
msgid "wbits"
msgstr ""
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
#: shared-bindings/is31fl3741/FrameBuffer.c
rgbmatrix: Check that the number of rgb pins is supported. Having zero RGB pins may not have been caught, nor having a non-multiple-of-6 value. Generally, users will only have 6 RGB pins unless they are driving multiple matrices in parallel. No existing breakouts exist to do this, and there are probably not any efficient pinouts to be had anyway.
2020-09-28 20:03:04 -04:00
msgid "width must be greater than zero"
msgstr ""
Rename esp32s2 port to espressif This is in preparation for ESP32-S3 support and potentially others. Related to #4363
2021-09-13 19:44:55 -04:00
#: ports/espressif/common-hal/wifi/Radio.c
Implement scan, connect, ping My pings go out, and then they come back ```py import os import wifi import ipaddress wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD')) ipv4 = ipaddress.ip_address("8.8.4.4") print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000)) ```
2022-08-31 11:13:39 -04:00
#: ports/raspberrypi/common-hal/wifi/Radio.c
1. check enabled before scan; 2. make start-station() the single control point for esp_wifi_set_mode()
2021-01-21 14:54:19 -05:00
msgid "wifi is not enabled"
msgstr ""
Implement scan, connect, ping My pings go out, and then they come back ```py import os import wifi import ipaddress wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD')) ipv4 = ipaddress.ip_address("8.8.4.4") print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000)) ```
2022-08-31 11:13:39 -04:00
#: ports/raspberrypi/common-hal/wifi/Monitor.c
msgid "wifi.Monitor not available"
msgstr ""
Update translations
2019-10-21 22:50:17 -04:00
#: shared-bindings/_bleio/Adapter.c
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
msgid "window must be <= interval"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "wrong dtype"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong index type"
msgstr ""
#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c
#: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c
#: extmod/ulab/code/numpy/vector.c
msgid "wrong input type"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of condition array"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of index array"
msgstr ""
#: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c
make translate again; make check-translate passes
2019-08-19 10:25:36 -04:00
msgid "wrong number of arguments"
msgstr ""
#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr ""
merge from upstream
2023-10-14 07:47:10 -04:00
#: extmod/ulab/code/numpy/vector.c
msgid "wrong output type"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of float type"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of shape (n_section, 2)"
msgstr ""
Reference in New Issue Copy Permalink