add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
/*
|
|
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
|
|
*
|
|
|
|
* The MIT License (MIT)
|
|
|
|
*
|
|
|
|
* Copyright (c) 2022 Jeff Epler for Adafruit Industries
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
|
|
* in the Software without restriction, including without limitation the rights
|
|
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
|
|
* THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
2022-09-22 18:03:05 -04:00
|
|
|
#include "py/mperrno.h"
|
2022-08-04 16:11:57 -04:00
|
|
|
#include "py/runtime.h"
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
#include "bindings/espcamera/Camera.h"
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
#include "bindings/espidf/__init__.h"
|
2023-01-27 11:28:37 -05:00
|
|
|
#include "common-hal/espcamera/Camera.h"
|
2022-09-22 18:03:05 -04:00
|
|
|
#include "shared-bindings/busio/I2C.h"
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
#include "shared-bindings/microcontroller/Pin.h"
|
2022-09-22 18:03:05 -04:00
|
|
|
#include "shared-bindings/util.h"
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
#include "common-hal/microcontroller/Pin.h"
|
|
|
|
|
2022-08-04 16:12:11 -04:00
|
|
|
#include "esp32-camera/driver/private_include/cam_hal.h"
|
|
|
|
|
2022-08-23 12:34:16 -04:00
|
|
|
#if !CONFIG_SPIRAM
|
2023-01-27 11:28:37 -05:00
|
|
|
#error espcamera only works on boards configured with spiram, disable it in mpconfigboard.mk
|
2022-08-23 12:34:16 -04:00
|
|
|
#endif
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
static void i2c_lock(espcamera_camera_obj_t *self) {
|
2022-09-22 18:03:05 -04:00
|
|
|
if (common_hal_busio_i2c_deinited(self->i2c)) {
|
|
|
|
raise_deinited_error();
|
|
|
|
}
|
|
|
|
if (!common_hal_busio_i2c_try_lock(self->i2c)) {
|
|
|
|
mp_raise_OSError(MP_EWOULDBLOCK);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
static void i2c_unlock(espcamera_camera_obj_t *self) {
|
2022-09-22 18:03:05 -04:00
|
|
|
common_hal_busio_i2c_unlock(self->i2c);
|
|
|
|
}
|
|
|
|
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
static void maybe_claim_pin(const mcu_pin_obj_t *pin) {
|
|
|
|
if (pin) {
|
|
|
|
claim_pin(pin);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
void common_hal_espcamera_camera_construct(
|
|
|
|
espcamera_camera_obj_t *self,
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
uint8_t data_pins[8],
|
|
|
|
const mcu_pin_obj_t *external_clock_pin,
|
|
|
|
const mcu_pin_obj_t *pixel_clock_pin,
|
|
|
|
const mcu_pin_obj_t *vsync_pin,
|
|
|
|
const mcu_pin_obj_t *href_pin,
|
|
|
|
const mcu_pin_obj_t *powerdown_pin,
|
|
|
|
const mcu_pin_obj_t *reset_pin,
|
2022-09-22 18:03:05 -04:00
|
|
|
busio_i2c_obj_t *i2c,
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
mp_int_t external_clock_frequency,
|
|
|
|
pixformat_t pixel_format,
|
|
|
|
framesize_t frame_size,
|
|
|
|
mp_int_t jpeg_quality,
|
|
|
|
mp_int_t framebuffer_count,
|
|
|
|
camera_grab_mode_t grab_mode) {
|
|
|
|
|
2022-08-23 12:34:22 -04:00
|
|
|
if (common_hal_espidf_get_reserved_psram() == 0) {
|
|
|
|
mp_raise_msg(&mp_type_MemoryError, translate(
|
2023-03-14 13:13:58 -04:00
|
|
|
"espcamera.Camera requires reserved PSRAM to be configured. See the documentation for instructions."));
|
2022-08-23 12:34:22 -04:00
|
|
|
}
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
for (int i = 0; i < 8; i++) {
|
|
|
|
claim_pin_number(data_pins[i]);
|
|
|
|
}
|
2022-12-15 20:11:12 -05:00
|
|
|
maybe_claim_pin(external_clock_pin);
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
claim_pin(pixel_clock_pin);
|
|
|
|
claim_pin(vsync_pin);
|
|
|
|
claim_pin(href_pin);
|
|
|
|
maybe_claim_pin(powerdown_pin);
|
|
|
|
maybe_claim_pin(reset_pin);
|
|
|
|
|
2022-12-15 20:11:12 -05:00
|
|
|
if (external_clock_pin) {
|
|
|
|
common_hal_pwmio_pwmout_construct(&self->pwm, external_clock_pin, 1, external_clock_frequency, true);
|
|
|
|
self->camera_config.ledc_timer = self->pwm.tim_handle.timer_num;
|
|
|
|
self->camera_config.ledc_channel = self->pwm.chan_handle.channel;
|
|
|
|
} else {
|
|
|
|
self->camera_config.ledc_channel = 0xff; // NO_CAMERA_LEDC_CHANNEL
|
|
|
|
}
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
|
2022-09-22 18:03:05 -04:00
|
|
|
self->i2c = i2c;
|
|
|
|
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
self->camera_config.pin_pwdn = common_hal_mcu_pin_number(powerdown_pin);
|
|
|
|
self->camera_config.pin_reset = common_hal_mcu_pin_number(reset_pin);
|
|
|
|
self->camera_config.pin_xclk = common_hal_mcu_pin_number(external_clock_pin);
|
|
|
|
|
|
|
|
self->camera_config.pin_sccb_sda = NO_PIN;
|
|
|
|
self->camera_config.pin_sccb_scl = NO_PIN;
|
|
|
|
/* sccb i2c port set below */
|
|
|
|
|
|
|
|
self->camera_config.pin_d7 = data_pins[7];
|
|
|
|
self->camera_config.pin_d6 = data_pins[6];
|
|
|
|
self->camera_config.pin_d5 = data_pins[5];
|
|
|
|
self->camera_config.pin_d4 = data_pins[4];
|
|
|
|
self->camera_config.pin_d3 = data_pins[3];
|
|
|
|
self->camera_config.pin_d2 = data_pins[2];
|
|
|
|
self->camera_config.pin_d1 = data_pins[1];
|
|
|
|
self->camera_config.pin_d0 = data_pins[0];
|
|
|
|
|
|
|
|
self->camera_config.pin_vsync = common_hal_mcu_pin_number(vsync_pin);
|
|
|
|
self->camera_config.pin_href = common_hal_mcu_pin_number(href_pin);
|
|
|
|
self->camera_config.pin_pclk = common_hal_mcu_pin_number(pixel_clock_pin);
|
|
|
|
|
|
|
|
self->camera_config.xclk_freq_hz = external_clock_frequency;
|
|
|
|
|
|
|
|
self->camera_config.pixel_format = pixel_format;
|
|
|
|
self->camera_config.frame_size = frame_size;
|
|
|
|
self->camera_config.jpeg_quality = jpeg_quality;
|
|
|
|
self->camera_config.fb_count = framebuffer_count;
|
|
|
|
self->camera_config.grab_mode = grab_mode;
|
|
|
|
|
|
|
|
self->camera_config.sccb_i2c_port = i2c->i2c_num;
|
|
|
|
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_lock(self);
|
|
|
|
esp_err_t result = esp_camera_init(&self->camera_config);
|
|
|
|
i2c_unlock(self);
|
|
|
|
|
|
|
|
CHECK_ESP_RESULT(result);
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
extern void common_hal_espcamera_camera_deinit(espcamera_camera_obj_t *self) {
|
|
|
|
if (common_hal_espcamera_camera_deinited(self)) {
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
common_hal_pwmio_pwmout_deinit(&self->pwm);
|
|
|
|
|
|
|
|
reset_pin_number(self->camera_config.pin_pwdn);
|
|
|
|
reset_pin_number(self->camera_config.pin_reset);
|
|
|
|
reset_pin_number(self->camera_config.pin_xclk);
|
|
|
|
|
|
|
|
reset_pin_number(self->camera_config.pin_d7);
|
|
|
|
reset_pin_number(self->camera_config.pin_d6);
|
|
|
|
reset_pin_number(self->camera_config.pin_d5);
|
|
|
|
reset_pin_number(self->camera_config.pin_d4);
|
|
|
|
reset_pin_number(self->camera_config.pin_d3);
|
|
|
|
reset_pin_number(self->camera_config.pin_d2);
|
|
|
|
reset_pin_number(self->camera_config.pin_d1);
|
|
|
|
reset_pin_number(self->camera_config.pin_d0);
|
|
|
|
|
|
|
|
esp_camera_deinit();
|
|
|
|
|
|
|
|
self->camera_config.xclk_freq_hz = 0;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
bool common_hal_espcamera_camera_deinited(espcamera_camera_obj_t *self) {
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
return !self->camera_config.xclk_freq_hz;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
bool common_hal_espcamera_camera_available(espcamera_camera_obj_t *self) {
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
return esp_camera_fb_available();
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
camera_fb_t *common_hal_espcamera_camera_take(espcamera_camera_obj_t *self, int timeout_ms) {
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
if (self->buffer_to_return) {
|
|
|
|
esp_camera_fb_return(self->buffer_to_return);
|
|
|
|
self->buffer_to_return = NULL;
|
|
|
|
}
|
2022-08-04 16:11:53 -04:00
|
|
|
return self->buffer_to_return = esp_camera_fb_get_timeout(timeout_ms);
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
}
|
2022-08-04 16:11:57 -04:00
|
|
|
|
|
|
|
#define SENSOR_GETSET(type, name, field_name, setter_function_name) \
|
|
|
|
SENSOR_GET(type, name, field_name, setter_function_name) \
|
|
|
|
SENSOR_SET(type, name, setter_function_name)
|
|
|
|
|
|
|
|
#define SENSOR_STATUS_GETSET(type, name, status_field_name, setter_function_name) \
|
|
|
|
SENSOR_GETSET(type, name, status.status_field_name, setter_function_name)
|
|
|
|
|
|
|
|
#define SENSOR_GET(type, name, status_field_name, setter_function_name) \
|
2023-01-27 11:28:37 -05:00
|
|
|
type common_hal_espcamera_camera_get_##name(espcamera_camera_obj_t * self) { \
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_lock(self); \
|
2022-08-04 16:11:57 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get(); \
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_unlock(self); \
|
2022-08-04 16:11:57 -04:00
|
|
|
if (!sensor->setter_function_name) { \
|
|
|
|
mp_raise_AttributeError(translate("no such attribute")); \
|
|
|
|
} \
|
|
|
|
return sensor->status_field_name; \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define SENSOR_SET(type, name, setter_function_name) \
|
2023-01-27 11:28:37 -05:00
|
|
|
void common_hal_espcamera_camera_set_##name(espcamera_camera_obj_t * self, type value) { \
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_lock(self); \
|
2022-08-04 16:11:57 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get(); \
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_unlock(self); \
|
2022-08-04 16:11:57 -04:00
|
|
|
if (!sensor->setter_function_name) { \
|
|
|
|
mp_raise_AttributeError(translate("no such attribute")); \
|
|
|
|
} \
|
|
|
|
if (sensor->setter_function_name(sensor, value) < 0) { \
|
|
|
|
mp_raise_ValueError(translate("invalid setting")); \
|
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
pixformat_t common_hal_espcamera_camera_get_pixel_format(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:11 -04:00
|
|
|
return self->camera_config.pixel_format;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
framesize_t common_hal_espcamera_camera_get_frame_size(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:11 -04:00
|
|
|
return self->camera_config.frame_size;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
void common_hal_espcamera_camera_reconfigure(espcamera_camera_obj_t *self, framesize_t frame_size, pixformat_t pixel_format, camera_grab_mode_t grab_mode, mp_int_t framebuffer_count) {
|
2022-08-04 16:12:11 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&sensor->id);
|
|
|
|
|
|
|
|
if (PIXFORMAT_JPEG == pixel_format && (!sensor_info->support_jpeg)) {
|
|
|
|
raise_esp_error(ESP_ERR_NOT_SUPPORTED);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (frame_size > sensor_info->max_size) {
|
|
|
|
frame_size = sensor_info->max_size;
|
|
|
|
}
|
|
|
|
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_lock(self);
|
2022-08-04 16:12:11 -04:00
|
|
|
cam_deinit();
|
|
|
|
self->camera_config.pixel_format = pixel_format;
|
|
|
|
self->camera_config.frame_size = frame_size;
|
|
|
|
self->camera_config.grab_mode = grab_mode;
|
|
|
|
self->camera_config.fb_count = framebuffer_count;
|
|
|
|
sensor->set_pixformat(sensor, self->camera_config.pixel_format);
|
|
|
|
sensor->set_framesize(sensor, self->camera_config.frame_size);
|
|
|
|
cam_init(&self->camera_config);
|
|
|
|
cam_config(&self->camera_config, frame_size, sensor_info->pid);
|
2022-09-22 18:03:05 -04:00
|
|
|
i2c_unlock(self);
|
2022-08-04 16:12:11 -04:00
|
|
|
cam_start();
|
|
|
|
}
|
|
|
|
|
2022-08-04 16:11:57 -04:00
|
|
|
SENSOR_STATUS_GETSET(int, contrast, contrast, set_contrast);
|
|
|
|
SENSOR_STATUS_GETSET(int, brightness, brightness, set_brightness);
|
|
|
|
SENSOR_STATUS_GETSET(int, saturation, saturation, set_saturation);
|
|
|
|
SENSOR_STATUS_GETSET(int, sharpness, sharpness, set_sharpness);
|
|
|
|
SENSOR_STATUS_GETSET(int, denoise, denoise, set_denoise);
|
|
|
|
SENSOR_STATUS_GETSET(gainceiling_t, gainceiling, gainceiling, set_gainceiling);
|
|
|
|
SENSOR_STATUS_GETSET(int, quality, quality, set_quality);
|
|
|
|
SENSOR_STATUS_GETSET(bool, colorbar, colorbar, set_colorbar);
|
|
|
|
SENSOR_STATUS_GETSET(bool, whitebal, awb, set_whitebal);
|
|
|
|
SENSOR_STATUS_GETSET(bool, gain_ctrl, agc, set_gain_ctrl);
|
|
|
|
SENSOR_STATUS_GETSET(bool, exposure_ctrl, aec, set_exposure_ctrl);
|
|
|
|
SENSOR_STATUS_GETSET(bool, hmirror, hmirror, set_hmirror);
|
|
|
|
SENSOR_STATUS_GETSET(bool, vflip, vflip, set_vflip);
|
|
|
|
SENSOR_STATUS_GETSET(bool, aec2, aec2, set_aec2);
|
|
|
|
SENSOR_STATUS_GETSET(bool, awb_gain, awb_gain, set_awb_gain);
|
|
|
|
SENSOR_STATUS_GETSET(int, agc_gain, agc_gain, set_agc_gain);
|
|
|
|
SENSOR_STATUS_GETSET(int, aec_value, aec_value, set_aec_value);
|
|
|
|
SENSOR_STATUS_GETSET(int, special_effect, special_effect, set_special_effect);
|
|
|
|
SENSOR_STATUS_GETSET(int, wb_mode, wb_mode, set_wb_mode);
|
|
|
|
SENSOR_STATUS_GETSET(int, ae_level, ae_level, set_ae_level);
|
|
|
|
SENSOR_STATUS_GETSET(bool, dcw, dcw, set_dcw);
|
|
|
|
SENSOR_STATUS_GETSET(bool, bpc, bpc, set_bpc);
|
|
|
|
SENSOR_STATUS_GETSET(bool, wpc, wpc, set_wpc);
|
|
|
|
SENSOR_STATUS_GETSET(bool, raw_gma, raw_gma, set_raw_gma);
|
|
|
|
SENSOR_STATUS_GETSET(bool, lenc, lenc, set_lenc);
|
2022-08-04 16:12:02 -04:00
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const char *common_hal_espcamera_camera_get_sensor_name(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&sensor->id);
|
|
|
|
return sensor_info->name;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const bool common_hal_espcamera_camera_get_supports_jpeg(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&sensor->id);
|
|
|
|
return sensor_info->support_jpeg;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const framesize_t common_hal_espcamera_camera_get_max_frame_size(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&sensor->id);
|
|
|
|
return sensor_info->max_size;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const int common_hal_espcamera_camera_get_address(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&sensor->id);
|
|
|
|
return sensor_info->sccb_addr;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const int common_hal_espcamera_camera_get_width(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
framesize_t framesize = sensor->status.framesize;
|
|
|
|
return resolution[framesize].width;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const int common_hal_espcamera_camera_get_height(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:02 -04:00
|
|
|
sensor_t *sensor = esp_camera_sensor_get();
|
|
|
|
framesize_t framesize = sensor->status.framesize;
|
|
|
|
return resolution[framesize].height;
|
|
|
|
}
|
2022-08-04 16:12:11 -04:00
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const camera_grab_mode_t common_hal_espcamera_camera_get_grab_mode(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:11 -04:00
|
|
|
return self->camera_config.grab_mode;
|
|
|
|
}
|
|
|
|
|
2023-01-27 11:28:37 -05:00
|
|
|
const int common_hal_espcamera_camera_get_framebuffer_count(espcamera_camera_obj_t *self) {
|
2022-08-04 16:12:11 -04:00
|
|
|
return self->camera_config.fb_count;
|
|
|
|
}
|