circuitpython/stm/stmusbd/usbd_core.c

507 lines
12 KiB
C
Raw Normal View History

2013-10-12 19:42:20 -04:00
/**
******************************************************************************
* @file usbd_core.c
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides all the USBD core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_core.h"
#include "usbd_req.h"
#include "usbd_ioreq.h"
#include "usb_dcd_int.h"
#include "usb_bsp.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief usbd core module
* @{
*/
/** @defgroup USBD_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_FunctionPrototypes
* @{
*/
static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev);
#ifdef VBUS_SENSING_ENABLED
static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev);
#endif
static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev);
static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev) ;
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Variables
* @{
*/
__IO USB_OTG_DCTL_TypeDef SET_TEST_MODE;
USBD_DCD_INT_cb_TypeDef USBD_DCD_INT_cb =
{
USBD_DataOutStage,
USBD_DataInStage,
USBD_SetupStage,
USBD_SOF,
USBD_Reset,
USBD_Suspend,
USBD_Resume,
USBD_IsoINIncomplete,
USBD_IsoOUTIncomplete,
#ifdef VBUS_SENSING_ENABLED
USBD_DevConnected,
USBD_DevDisconnected,
#endif
};
USBD_DCD_INT_cb_TypeDef *USBD_DCD_INT_fops = &USBD_DCD_INT_cb;
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_Init
* Initailizes the device stack and load the class driver
* @param pdev: device instance
* @param core_address: USB OTG core ID
* @param class_cb: Class callback structure address
* @param usr_cb: User callback structure address
* @retval None
*/
void USBD_Init(USB_OTG_CORE_HANDLE *pdev,
USB_OTG_CORE_ID_TypeDef coreID,
USBD_DEVICE *pDevice,
USBD_Class_cb_TypeDef *class_cb,
USBD_Usr_cb_TypeDef *usr_cb)
{
/* Hardware Init */
USB_OTG_BSP_Init(pdev);
USBD_DeInit(pdev);
/*Register class and user callbacks */
pdev->dev.class_cb = class_cb;
pdev->dev.usr_cb = usr_cb;
pdev->dev.usr_device = pDevice;
/* set USB OTG core params */
DCD_Init(pdev , coreID);
/* Upon Init call usr callback */
pdev->dev.usr_cb->Init();
/* Enable Interrupts */
USB_OTG_BSP_EnableInterrupt(pdev);
}
/**
* @brief USBD_DeInit
* Re-Initialize th device library
* @param pdev: device instance
* @retval status: status
*/
USBD_Status USBD_DeInit(USB_OTG_CORE_HANDLE *pdev)
{
/* Software Init */
return USBD_OK;
}
/**
* @brief USBD_SetupStage
* Handle the setup stage
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev)
{
USB_SETUP_REQ req;
USBD_ParseSetupRequest(pdev , &req);
switch (req.bmRequest & 0x1F)
{
case USB_REQ_RECIPIENT_DEVICE:
USBD_StdDevReq (pdev, &req);
break;
case USB_REQ_RECIPIENT_INTERFACE:
USBD_StdItfReq(pdev, &req);
break;
case USB_REQ_RECIPIENT_ENDPOINT:
USBD_StdEPReq(pdev, &req);
break;
default:
DCD_EP_Stall(pdev , req.bmRequest & 0x80);
break;
}
return USBD_OK;
}
/**
* @brief USBD_DataOutStage
* Handle data out stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
{
USB_OTG_EP *ep;
if(epnum == 0)
{
ep = &pdev->dev.out_ep[0];
if ( pdev->dev.device_state == USB_OTG_EP0_DATA_OUT)
{
if(ep->rem_data_len > ep->maxpacket)
{
ep->rem_data_len -= ep->maxpacket;
if(pdev->cfg.dma_enable == 1)
{
/* in slave mode this, is handled by the RxSTSQLvl ISR */
ep->xfer_buff += ep->maxpacket;
}
USBD_CtlContinueRx (pdev,
ep->xfer_buff,
MIN(ep->rem_data_len ,ep->maxpacket));
}
else
{
if((pdev->dev.class_cb->EP0_RxReady != NULL)&&
(pdev->dev.device_status == USB_OTG_CONFIGURED))
{
pdev->dev.class_cb->EP0_RxReady(pdev);
}
USBD_CtlSendStatus(pdev);
}
}
}
else if((pdev->dev.class_cb->DataOut != NULL)&&
(pdev->dev.device_status == USB_OTG_CONFIGURED))
{
pdev->dev.class_cb->DataOut(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_DataInStage
* Handle data in stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
{
USB_OTG_EP *ep;
if(epnum == 0)
{
ep = &pdev->dev.in_ep[0];
if ( pdev->dev.device_state == USB_OTG_EP0_DATA_IN)
{
if(ep->rem_data_len > ep->maxpacket)
{
ep->rem_data_len -= ep->maxpacket;
if(pdev->cfg.dma_enable == 1)
{
/* in slave mode this, is handled by the TxFifoEmpty ISR */
ep->xfer_buff += ep->maxpacket;
}
USBD_CtlContinueSendData (pdev,
ep->xfer_buff,
ep->rem_data_len);
}
else
{ /* last packet is MPS multiple, so send ZLP packet */
if((ep->total_data_len % ep->maxpacket == 0) &&
(ep->total_data_len >= ep->maxpacket) &&
(ep->total_data_len < ep->ctl_data_len ))
{
USBD_CtlContinueSendData(pdev , NULL, 0);
ep->ctl_data_len = 0;
}
else
{
if((pdev->dev.class_cb->EP0_TxSent != NULL)&&
(pdev->dev.device_status == USB_OTG_CONFIGURED))
{
pdev->dev.class_cb->EP0_TxSent(pdev);
}
USBD_CtlReceiveStatus(pdev);
}
}
}
if (pdev->dev.test_mode == 1)
{
USBD_RunTestMode(pdev);
pdev->dev.test_mode = 0;
}
}
else if((pdev->dev.class_cb->DataIn != NULL)&&
(pdev->dev.device_status == USB_OTG_CONFIGURED))
{
pdev->dev.class_cb->DataIn(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_RunTestMode
* Launch test mode process
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, SET_TEST_MODE.d32);
return USBD_OK;
}
/**
* @brief USBD_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev)
{
/* Open EP0 OUT */
DCD_EP_Open(pdev,
0x00,
USB_OTG_MAX_EP0_SIZE,
EP_TYPE_CTRL);
/* Open EP0 IN */
DCD_EP_Open(pdev,
0x80,
USB_OTG_MAX_EP0_SIZE,
EP_TYPE_CTRL);
/* Upon Reset call usr call back */
pdev->dev.device_status = USB_OTG_DEFAULT;
pdev->dev.usr_cb->DeviceReset(pdev->cfg.speed);
return USBD_OK;
}
/**
* @brief USBD_Resume
* Handle Resume event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev)
{
/* Upon Resume call usr call back */
pdev->dev.usr_cb->DeviceResumed();
pdev->dev.device_status = pdev->dev.device_old_status;
pdev->dev.device_status = USB_OTG_CONFIGURED;
return USBD_OK;
}
/**
* @brief USBD_Suspend
* Handle Suspend event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev)
{
pdev->dev.device_old_status = pdev->dev.device_status;
pdev->dev.device_status = USB_OTG_SUSPENDED;
/* Upon Resume call usr call back */
pdev->dev.usr_cb->DeviceSuspended();
return USBD_OK;
}
/**
* @brief USBD_SOF
* Handle SOF event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev)
{
if(pdev->dev.class_cb->SOF)
{
pdev->dev.class_cb->SOF(pdev);
}
return USBD_OK;
}
/**
* @brief USBD_SetCfg
* Configure device and start the interface
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
USBD_Status USBD_SetCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx)
{
pdev->dev.class_cb->Init(pdev, cfgidx);
/* Upon set config call usr call back */
pdev->dev.usr_cb->DeviceConfigured();
return USBD_OK;
}
/**
* @brief USBD_ClrCfg
* Clear current configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status: USBD_Status
*/
USBD_Status USBD_ClrCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx)
{
pdev->dev.class_cb->DeInit(pdev, cfgidx);
return USBD_OK;
}
/**
* @brief USBD_IsoINIncomplete
* Handle iso in incomplete event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev)
{
pdev->dev.class_cb->IsoINIncomplete(pdev);
return USBD_OK;
}
/**
* @brief USBD_IsoOUTIncomplete
* Handle iso out incomplete event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev)
{
pdev->dev.class_cb->IsoOUTIncomplete(pdev);
return USBD_OK;
}
#ifdef VBUS_SENSING_ENABLED
/**
* @brief USBD_DevConnected
* Handle device connection event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev)
{
pdev->dev.usr_cb->DeviceConnected();
pdev->dev.connection_status = 1;
return USBD_OK;
}
/**
* @brief USBD_DevDisconnected
* Handle device disconnection event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev)
{
pdev->dev.usr_cb->DeviceDisconnected();
pdev->dev.class_cb->DeInit(pdev, 0);
pdev->dev.connection_status = 0;
return USBD_OK;
}
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/