circuitpython/ports/broadcom/mpconfigport.mk

# All broadcom ports have longints.
LONGINT_IMPL = MPZ

CIRCUITPY_FULL_BUILD = 1

# Modules in FULL_BUILD that we don't support.
CIRCUITPY_ANALOGIO = 0
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_AUDIOIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_I2CTARGET = 0
CIRCUITPY_NVM = 0
CIRCUITPY_PARALLELDISPLAYBUS = 0
CIRCUITPY_PULSEIO = 0
CIRCUITPY_PWMIO = 0
CIRCUITPY_ROTARYIO = 0

CIRCUITPY_SDIOIO = 1
CIRCUITPY_VIDEOCORE = 1

INTERNAL_FLASH_FILESYSTEM = 1

USB_NUM_ENDPOINT_PAIRS = 8
USB_HIGHSPEED = 1

CIRCUITPY_BUILD_EXTENSIONS ?= disk.img.zip,kernel8.img
Add long integer flags to enable Code stolen from raspberrypi port 2021-12-23 14:29:25 -05:00			`# All broadcom ports have longints.`
			`LONGINT_IMPL = MPZ`

Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00			`CIRCUITPY_FULL_BUILD = 1`

			`# Modules in FULL_BUILD that we don't support.`
Initial broadcom port for Raspberry Pi This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4 and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes outside of the ports directory for it. There are a couple other cleanups that were incidental: * Use const mcu_pin_obj_t instead of omitting the const. The structs themselves are const because they are in ROM. * Use PTR <-> OBJ conversions in more places. They were found when mp_obj_t was set to an integer type rather than pointer. * Optimize submodule checkout because the Pi submodules are heavy and unnecessary for the vast majority of builds. Fixes #4314 2021-08-04 19:27:54 -04:00			`CIRCUITPY_ANALOGIO = 0`
			`CIRCUITPY_AUDIOBUSIO = 0`
			`CIRCUITPY_AUDIOIO = 0`
Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00			`CIRCUITPY_COUNTIO = 0`
Initial broadcom port for Raspberry Pi This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4 and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes outside of the ports directory for it. There are a couple other cleanups that were incidental: * Use const mcu_pin_obj_t instead of omitting the const. The structs themselves are const because they are in ROM. * Use PTR <-> OBJ conversions in more places. They were found when mp_obj_t was set to an integer type rather than pointer. * Optimize submodule checkout because the Pi submodules are heavy and unnecessary for the vast majority of builds. Fixes #4314 2021-08-04 19:27:54 -04:00			`CIRCUITPY_FREQUENCYIO = 0`
Change I2C terminology from "peripheral" to "target" 2022-08-09 13:06:18 -04:00			`CIRCUITPY_I2CTARGET = 0`
Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00			`CIRCUITPY_NVM = 0`
Split displayio hardware support from core These are moved: * Display -> busdisplay.BusDisplay * FourWire -> fourwire.FourWire * EPaperDisplay -> epaperdisplay.EPaperDisplay * I2CDisplay -> i2cdisplaybus.I2CDisplayBus `paralleldisplay` is now `paralleldisplaybus` (and registered as `paralleldisplay` too). Bus related helpers are split out of display_core into bus_core. It is in still displayio since it is a dependency of both busdisplay and epaperdisplay. Fixes #7667 2023-10-17 19:09:47 -04:00			`CIRCUITPY_PARALLELDISPLAYBUS = 0`
Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00			`CIRCUITPY_PULSEIO = 0`
			`CIRCUITPY_PWMIO = 0`
			`CIRCUITPY_ROTARYIO = 0`
Initial broadcom port for Raspberry Pi This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4 and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes outside of the ports directory for it. There are a couple other cleanups that were incidental: * Use const mcu_pin_obj_t instead of omitting the const. The structs themselves are const because they are in ROM. * Use PTR <-> OBJ conversions in more places. They were found when mp_obj_t was set to an integer type rather than pointer. * Optimize submodule checkout because the Pi submodules are heavy and unnecessary for the vast majority of builds. Fixes #4314 2021-08-04 19:27:54 -04:00
Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00			`CIRCUITPY_SDIOIO = 1`
Initial broadcom port for Raspberry Pi This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4 and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes outside of the ports directory for it. There are a couple other cleanups that were incidental: * Use const mcu_pin_obj_t instead of omitting the const. The structs themselves are const because they are in ROM. * Use PTR <-> OBJ conversions in more places. They were found when mp_obj_t was set to an integer type rather than pointer. * Optimize submodule checkout because the Pi submodules are heavy and unnecessary for the vast majority of builds. Fixes #4314 2021-08-04 19:27:54 -04:00			`CIRCUITPY_VIDEOCORE = 1`

			`INTERNAL_FLASH_FILESYSTEM = 1`
Piunora + full build + high speed usb 2022-01-06 13:53:57 -05:00
			`USB_NUM_ENDPOINT_PAIRS = 8`
			`USB_HIGHSPEED = 1`
Move build extensions to board directories - define CIRCUITPY_BUILD_EXTENSIONS to predefined values - set CIRCUITPY_BUILD_EXTENSIONS in port and board config - reuse the support matrix "get_settings_from_makefile" to get it - move the existing port and board specific values - remove the C3 specific board values because it's not the default - update build_release_files.py to use get_settings_from_makefile 2022-05-13 05:38:03 -04:00
list extensions instead of macros names ("bin,uf2" not BIN_UF2) the modules_support_matrix usees a dictionnary per board instead of a list optionally include the frozen modules URLs in it 2022-07-19 17:35:51 -04:00			`CIRCUITPY_BUILD_EXTENSIONS ?= disk.img.zip,kernel8.img`