circuitpython/lib/sdmmc/sdmmc_common.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

133 lines
6.3 KiB
C
Raw Permalink Normal View History

/*
* Copyright (c) 2006 Uwe Stuehler <uwe@openbsd.org>
* Adaptations to ESP-IDF Copyright (c) 2016-2018 Espressif Systems (Shanghai) PTE LTD
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#pragma once
#include <string.h>
#include "sdmmc_defs.h"
#include "sdmmc_types.h"
#include "sdmmc_cmd.h"
#define SDMMC_GO_IDLE_DELAY_MS 20
#define SDMMC_IO_SEND_OP_COND_DELAY_MS 10
/* These delay values are mostly useful for cases when CD pin is not used, and
* the card is removed. In this case, SDMMC peripheral may not always return
* CMD_DONE / DATA_DONE interrupts after signaling the error. These timeouts work
* as a safety net in such cases.
*/
#define SDMMC_DEFAULT_CMD_TIMEOUT_MS 1000 // Max timeout of ordinary commands
#define SDMMC_WRITE_CMD_TIMEOUT_MS 5000 // Max timeout of write commands
/* Maximum retry/error count for SEND_OP_COND (CMD1).
* These are somewhat arbitrary, values originate from OpenBSD driver.
*/
#define SDMMC_SEND_OP_COND_MAX_RETRIES 100
#define SDMMC_SEND_OP_COND_MAX_ERRORS 3
/* Functions to send individual commands */
sdmmc_err_t sdmmc_send_cmd(sdmmc_card_t* card, sdmmc_command_t* cmd);
sdmmc_err_t sdmmc_send_app_cmd(sdmmc_card_t* card, sdmmc_command_t* cmd);
sdmmc_err_t sdmmc_send_cmd_go_idle_state(sdmmc_card_t* card);
sdmmc_err_t sdmmc_send_cmd_send_if_cond(sdmmc_card_t* card, uint32_t ocr);
sdmmc_err_t sdmmc_send_cmd_send_op_cond(sdmmc_card_t* card, uint32_t ocr, uint32_t *ocrp);
sdmmc_err_t sdmmc_send_cmd_read_ocr(sdmmc_card_t *card, uint32_t *ocrp);
sdmmc_err_t sdmmc_send_cmd_send_cid(sdmmc_card_t *card, sdmmc_cid_t *out_cid);
sdmmc_err_t sdmmc_send_cmd_all_send_cid(sdmmc_card_t* card, sdmmc_response_t* out_raw_cid);
sdmmc_err_t sdmmc_send_cmd_set_relative_addr(sdmmc_card_t* card, uint16_t* out_rca);
sdmmc_err_t sdmmc_send_cmd_set_blocklen(sdmmc_card_t* card, sdmmc_csd_t* csd);
sdmmc_err_t sdmmc_send_cmd_switch_func(sdmmc_card_t* card,
uint32_t mode, uint32_t group, uint32_t function,
sdmmc_switch_func_rsp_t* resp);
sdmmc_err_t sdmmc_send_cmd_send_csd(sdmmc_card_t* card, sdmmc_csd_t* out_csd);
sdmmc_err_t sdmmc_send_cmd_select_card(sdmmc_card_t* card, uint32_t rca);
sdmmc_err_t sdmmc_send_cmd_send_scr(sdmmc_card_t* card, sdmmc_scr_t *out_scr);
sdmmc_err_t sdmmc_send_cmd_set_bus_width(sdmmc_card_t* card, int width);
sdmmc_err_t sdmmc_send_cmd_send_status(sdmmc_card_t* card, uint32_t* out_status);
sdmmc_err_t sdmmc_send_cmd_crc_on_off(sdmmc_card_t* card, bool crc_enable);
/* Higher level functions */
sdmmc_err_t sdmmc_enable_hs_mode(sdmmc_card_t* card);
sdmmc_err_t sdmmc_enable_hs_mode_and_check(sdmmc_card_t* card);
sdmmc_err_t sdmmc_write_sectors_dma(sdmmc_card_t* card, const void* src,
size_t start_block, size_t block_count);
sdmmc_err_t sdmmc_read_sectors_dma(sdmmc_card_t* card, void* dst,
size_t start_block, size_t block_count);
/* SD specific */
sdmmc_err_t sdmmc_check_scr(sdmmc_card_t* card);
sdmmc_err_t sdmmc_decode_cid(sdmmc_response_t resp, sdmmc_cid_t* out_cid);
sdmmc_err_t sdmmc_decode_csd(sdmmc_response_t response, sdmmc_csd_t* out_csd);
sdmmc_err_t sdmmc_decode_scr(uint32_t *raw_scr, sdmmc_scr_t* out_scr);
/* SDIO specific */
sdmmc_err_t sdmmc_io_reset(sdmmc_card_t* card);
sdmmc_err_t sdmmc_io_enable_hs_mode(sdmmc_card_t* card);
sdmmc_err_t sdmmc_io_send_op_cond(sdmmc_card_t* card, uint32_t ocr, uint32_t *ocrp);
sdmmc_err_t sdmmc_io_rw_direct(sdmmc_card_t* card, int function,
uint32_t reg, uint32_t arg, uint8_t *byte);
sdmmc_err_t sdmmc_io_rw_extended(sdmmc_card_t* card, int function,
uint32_t reg, int arg, void *data, size_t size);
/* MMC specific */
sdmmc_err_t sdmmc_mmc_send_ext_csd_data(sdmmc_card_t* card, void *out_data, size_t datalen);
sdmmc_err_t sdmmc_mmc_switch(sdmmc_card_t* card, uint8_t set, uint8_t index, uint8_t value);
sdmmc_err_t sdmmc_mmc_decode_cid(int mmc_ver, sdmmc_response_t resp, sdmmc_cid_t* out_cid);
sdmmc_err_t sdmmc_mmc_decode_csd(sdmmc_response_t response, sdmmc_csd_t* out_csd);
sdmmc_err_t sdmmc_mmc_enable_hs_mode(sdmmc_card_t* card);
/* Parts of card initialization flow */
sdmmc_err_t sdmmc_init_sd_if_cond(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_select_card(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_csd(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_cid(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_rca(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_mmc_decode_cid(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_ocr(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_spi_crc(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_io(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_sd_blocklen(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_sd_scr(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_sd_wait_data_ready(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_mmc_read_ext_csd(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_mmc_read_cid(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_host_bus_width(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_sd_bus_width(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_io_bus_width(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_mmc_bus_width(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_card_hs_mode(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_host_frequency(sdmmc_card_t* card);
sdmmc_err_t sdmmc_init_mmc_check_csd(sdmmc_card_t* card);
/* Various helper functions */
static inline bool host_is_spi(const sdmmc_card_t* card)
{
return (card->host.flags & SDMMC_HOST_FLAG_SPI) != 0;
}
static inline uint32_t get_host_ocr(float voltage)
{
// TODO: report exact voltage to the card
// For now tell that the host has 2.8-3.6V voltage range
(void) voltage;
return SD_OCR_VOL_MASK;
}
void sdmmc_flip_byte_order(uint32_t* response, size_t size);
sdmmc_err_t sdmmc_fix_host_flags(sdmmc_card_t* card);