mirror of https://github.com/DJSundog/NopSCADlib.git synced 2024-11-27 01:03:51 -05:00

History

Chris Palmer fe27391aff Changed the colour scheme		2019-06-10 19:57:13 +01:00
..
ArduinoThermostat.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
HydraBot.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
IOT_50V_PSU.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
Lab_ATX_PSU.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
Laser_load.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
Mains_Box.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
MainsBreakOutBox.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
readme.md	PNG files have a date in them so now only update them if they have actually changed.	2019-06-09 13:19:08 +01:00
Turntable.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00
Variac.png	Changed the colour scheme	2019-06-10 19:57:13 +01:00

A gallery of projects made with NopSCADlib

ArduinoThermostat

Arduino thermostat to control a beer fridge to use it as an environmental chamber.

Current state of HydraRaptor after being modified for laser engraving.

WiFi controllable PSU

Bench power supply built around an ATX PSU.

Cheap LED voltmeters show the voltage on the four main outputs.
The 5V standby output is available from a USB socket. The main PSU can be switched on with a switch or by pulling the green socket next to it low.
The green LED shows the power good signal.
Dummy loads keep the outputs in range.

15kV dummy load for testing CO2 laser PSUs

13A socket break out box with 4mm jacks to measure voltage and / or load current and earth leakage current.

Mains isolated and variable supply with metering.

WiFi enabled remote control turntable for photography