NopSCADlib/examples/MainsBreakOutBox/scad/bob_main.scad

//
// NopSCADlib Copyright Chris Palmer 2018
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//

//
//! 13A socket break out box with 4mm jacks to measure voltage and / or load current and earth leakage current.
//!
//! Intended as a simple example of NopSCADlib use. Don't build it unless you understand the safety implications of working with mains electricity. In the words of
//! the great [Paul Carlson](https://www.youtube.com/channel/UCU9SoQxJewrWb_3GxeteQPA), "if you are following along, you are doing so at your own risk".
//!
//! In normal use the neutral jack sockets are linked with a short lead and so are the two earth jacks. Current can be safely measured using a clamp ammeter around the neutral link.
//!
//! Voltage and current waveforms can be measured simultaneously with a [Mooshimeter](https://moosh.im/) CAT III multimeter connected to the bottom three jacks.
//!
//! Earth leakage current can be measured by connecting an AC milliampere meter between the two earth jacks. The DUT must be mounted on an insulated substrate and must not be touched
//! while its earth is disconnected. Don't be tempted to float the earth of an oscilloscope this way, use a mains isolation transformer to power the DUT instead.
//! Earth leakage can be measured Canadian CSA style by disconnected the neutral link from the left socket and linking the central neutral to the live.
//
$extrusion_width = 0.5;
$pp1_colour = "dimgrey";
$pp2_colour = [0.9, 0.9, 0.9];

include <NopSCADlib/core.scad>
include <NopSCADlib/vitamins/iecs.scad>
include <NopSCADlib/vitamins/mains_sockets.scad>
include <NopSCADlib/vitamins/tubings.scad>

use <NopSCADlib/vitamins/insert.scad>
use <NopSCADlib/vitamins/wire.scad>
use <NopSCADlib/vitamins/jack.scad>
use <NopSCADlib/printed/foot.scad>

echo(extrusion_width = extrusion_width, layer_height = layer_height);
wall = 2.5;

iec = IEC_inlet_atx;
socket = Contactum;


foot = Foot(d = 20, h = 8, t = 3, r = 1, screw = M3_dome_screw);

module foot_stl() foot(foot);

socket_depth = 13;

screw = mains_socket_screw(socket);
screw_clearance_radius = screw_clearance_radius(screw);

insert = screw_insert(screw);
insert_hole_radius = insert_hole_radius(insert);
insert_length = insert_length(insert);
insert_boss = mains_socket_insert_boss(socket);
screw_length = screw_longer_than(mains_socket_height(socket) + insert_length(insert));

iec_h = iec_body_h(iec) + 1;

box_height = socket_depth + iec_h;
base_thickness = wall;
height = base_thickness + box_height;

iec_x = -mains_socket_width(socket) / 2;
iec_y = 0;
iec_z = base_thickness + iec_h / 2;

jack_pitch = 20;
jack_z = iec_z;

module foot_positions() {
    inset = wall + foot_diameter(foot) / 2;
    pitch = mains_socket_width(socket) / 2 - inset;

    for(x = [-1, 1], y = [-1, 1])
        translate([x * pitch, y * pitch])
            children();
}

module jack_hole() {
    intersection() {
        teardrop_plus(r = jack_4mm_shielded_hole_radius(), h = 50);

        cube([11, 100, 100], center = true);
    }
}

module socket_box_stl() {
    stl("socket_box");

    difference() {
        linear_extrude(height = height, convexity = 5)
            face_plate(socket);

        difference() {
            translate_z(base_thickness)
                linear_extrude(height = height, convexity = 5)
                     offset(-wall) face_plate(socket);

            z = height + mains_socket_height(socket) - screw_length - wall;
            for(side = [-1, 1])
                difference() {
                    hull()
                        for(x = [1, 2])
                            translate([side * mains_socket_pitch(socket) / x, 0, 0])
                                cylinder(d = insert_boss, h = 100);
                    hull() {
                        translate([side * mains_socket_pitch(socket) / 2, 0, 0])
                            cylinder(d = insert_boss - 4 * extrusion_width, h = z);

                        translate([side * (mains_socket_width(socket) / 2 - wall - 1), 0, z / 2])
                            cube([2, insert_boss - 4 * extrusion_width, z], center = true);
                    }
                    w = show_supports() ? 1 : 20;
                    translate([side * (mains_socket_width(socket) / 2 - wall - w/ 2), 0, z / 2])
                        cube([w, insert_boss + 1, z], center = true);
                }
        }
        //
        // Socket holes
        //
        translate_z(height)
            mains_socket_hole_positions(socket) {
                poly_cylinder(r = screw_clearance_radius, h = 2 * (screw_length - mains_socket_height(socket)) + 2, center = true);

                poly_cylinder(r = insert_hole_radius, h = 2 * insert_length, center = true);
            }
        //
        // IEC holes
        //
        difference() {
            translate([iec_x, iec_y, iec_z])
                rotate([90, 0, -90])
                    iec_holes(iec);

                linear_extrude(height = height, convexity = 5)
                     offset(-wall) face_plate(socket);
        }
        //
        // Jack holes
        //
        for(x = [-1, 0, 1])
            translate([x * jack_pitch, -mains_socket_width(socket) / 2, jack_z])
                rotate([90, 0, 0])
                    jack_hole();

        for(x = [-1, 1])
            translate([x * jack_pitch / 2, mains_socket_width(socket) / 2, jack_z])
                rotate([90, 0, 0])
                    jack_hole();
        //
        // Feet holes
        //
        foot_positions()
            poly_cylinder(r = screw_clearance_radius(foot_screw(foot)), h = 100, center = true);
    }
}
//
//! 1. Remove the support material from under the insert lugs.
//! 2. Place the inserts into the holes in the lugs and press home with a soldering iron with a conical bit heated to 200&deg;C.
//
module base_assembly()
assembly("base") {
    stl_colour(pp1_colour) render() /*clip(ymax = 0)*/ socket_box_stl();

    mains_socket_hole_positions(socket)
        translate_z(height)
            insert(insert);
}
//
//! * Attach the four feet using 10mm M3 dome screws, washers above and below and nyloc nuts
//
module feet_assembly()
assembly("feet") {
    base_assembly();

    foot_positions()
        foot_assembly(base_thickness, foot);
}
//
//! 1. Solder wires to the IEC terminals: -
//!     * Use wire rated for 13A, e.g. 1.5mm<sup>2</sup>, the easiest source is stripping 13A rated flex.
//!     * Attach one green & yellow to the earth, one blue to neutral and two brown to the live.
//!     * The earth, neutral and one of the live wires should be long enough to protrude through the appropriate 4mm jack holes far enough to be able to strip and solder them to the jacks.
//!     * The second brown needs to be long enough to reach the socket.
//! 1. Cover the the joints with heatshrink sleeving and shrink it with a hot air gun.
//! 1. Attach the IEC inlet using two 12mm M3 countersunk cap screws, washers and nyloc nuts on the back.
//
module mains_in_assembly() pose([ 35.40, 0.00, 144.20 ], [ -13.10, 0.00, 13.75 ])
assembly("mains_in") {
    feet_assembly();

    hidden() {
        wire("green & yellow", 30, 150, 0.25);
        wire("blue",  30, 150, 0.25);
        wire("brown", 30, 150, 0.25);
        wire("brown", 30, 150, 0.25);
        for(i = [1:3])
            tubing(HSHRNK32);
    }
    translate([iec_x, iec_y, iec_z])
        rotate([90, 0, -90])
            iec_assembly(iec, wall);

}
//
//! ![inside](docs/inside_small.jpg)
//!
//! 1. Put the blue wire from the IEC inlet through the bottom left jack hole, strip it, add heatshrink sleeving and solder it to one of the blue jack sockets.
//! 1. Put the green & yellow wire through the top left jack hole, add heatshrink sleeving and solder it to one of the green jack sockets.
//! 1. Put the thin brown wire the bottom right jack hole, add heatshrink sleeving and solder it to the brown jack socket.
//! 1. Shrink the heatshrink and screw in the three jack sockets.
//! 1. Solder a 13A green & yellow wire to the remaining green jack socket, long enough to reach the 13A socket. Add heashrink and fit it to the top right jack hole.
//! 1. Solder a 13A blue wire to the remaining blue jack socket, long enough to reach the 13A socket. Add heatshrink and fit to the bottom middle jack hole.
//! 1. Crimp appropriate ferrules to the three wires and connect them to the 13A socket.
//! 1. Screw the socket onto the top of the case using two 20mm M3 countersunk cap screws.
//
module main_assembly()
assembly("main") {
    hidden() {
        wire("green & yellow", 30, 150, 0.25);
        wire("blue",  30, 150, 0.25);
        for(i = [1:5])
            hidden() tubing(HSHRNK32);

        for(i = [1:3])
            vitamin(": Ferrule for 1.5mm^2 wire");
    }
    echo(screw_length = screw_length);

    mains_in_assembly();

    explode(50, true) {
        translate_z(height)
             mains_socket(socket);

        mains_socket_hole_positions(socket)
            translate_z(height + mains_socket_height(socket))
                screw(screw, screw_length);
    }

    for(x = [-1, 0, 1])
        translate([x * jack_pitch, -mains_socket_width(socket) / 2, jack_z])
            rotate([90, 0, 0])
                jack_4mm_shielded(["blue", "blue", "brown"][x + 1], wall, ["royalblue", "royalblue", "sienna"][x + 1]);

        for(x = [-1, 1])
            translate([x * jack_pitch / 2, mains_socket_width(socket) / 2, jack_z])
                rotate([90, 0, 180])
                    jack_4mm_shielded("green", wall);
}


if($preview)
    main_assembly();
else
    socket_box_stl();