.. |
microview
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
axial.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
axials.scad
|
Added axial PCB mounted resistors.
|
2020-04-14 18:09:58 +01:00 |
ball_bearing.scad
|
Fixed ball bearing chamfers.
|
2020-07-31 01:33:33 +01:00 |
ball_bearings.scad
|
Added SMR95 ball bearing
|
2020-07-04 17:30:26 +01:00 |
batteries.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
battery.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
belt.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
belts.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
blower.scad
|
Added 30x10 square radial fan.
|
2021-02-04 18:26:44 +00:00 |
blowers.scad
|
Updated screw hole position.
|
2021-02-04 19:59:28 +00:00 |
bulldog.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
bulldogs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
button.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
buttons.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
cable_strip.scad
|
More spelling
|
2020-11-04 19:50:35 +00:00 |
camera.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
cameras.scad
|
Added printed camera housings.
|
2020-11-13 22:43:55 +00:00 |
circlip.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
circlips.scad
|
Added circlips.
|
2020-03-24 17:22:32 +00:00 |
component.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
components.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
d_connector.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
d_connectors.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
dip.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
display.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
displays.scad
|
Remove commented out code.
|
2021-01-13 20:17:43 +00:00 |
e3d.scad
|
Colours passed to thread need to be numeric, not strings.
|
2020-11-13 17:51:30 +00:00 |
extrusion.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
extrusion_bracket.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
extrusion_brackets.scad
|
Naming update.
|
2020-02-25 22:23:44 +00:00 |
extrusions.scad
|
Added E1515 extrusion.
|
2020-03-02 18:51:27 +00:00 |
fan.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
fans.scad
|
25mm fans are actually 25.4, i.e. 1".
|
2020-09-06 11:55:58 +01:00 |
fuseholder.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
geared_stepper.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
geared_steppers.scad
|
Added small geared stepper and driver board.
|
2019-08-18 11:46:33 +01:00 |
green_terminal.scad
|
Added yet another type of green terminal that is blue.
|
2020-04-08 19:38:52 +01:00 |
green_terminals.scad
|
Added green terminals gt_5x11 and gt_5x17.
|
2021-01-13 15:51:41 +00:00 |
hot_end.scad
|
Add optional bowden connector to E3D hotends.
|
2020-11-13 10:21:38 +00:00 |
hot_ends.scad
|
Spacing
|
2020-09-06 11:56:55 +01:00 |
hygrometer.scad
|
Bug fix hygrometer_hole() when h > 0.
|
2021-01-08 21:24:06 +00:00 |
iec.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
iecs.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
insert.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
inserts.scad
|
Whitespace fixes.
|
2020-12-13 10:29:54 +00:00 |
jack.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
jhead.scad
|
J-head heater components now hidden when taped.
|
2021-01-09 19:21:49 +00:00 |
kp_pillow_block.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
kp_pillow_blocks.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
ldr.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
ldrs.scad
|
LDRs thicker
|
2019-07-29 16:39:09 +01:00 |
leadnut.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
leadnuts.scad
|
Added screw threads to most things that are threaded.
|
2020-02-22 19:44:01 +00:00 |
led.scad
|
LEDs can now be placed on PCBs.
|
2020-04-10 12:41:05 +01:00 |
led_meter.scad
|
Can now put wire links on PCBs
|
2020-09-06 12:31:41 +01:00 |
led_meters.scad
|
led_ammeter size tweaks.
|
2020-04-25 19:38:43 +01:00 |
leds.scad
|
Change LED.scad to led.scad
|
2019-06-25 10:35:41 +02:00 |
light_strip.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
light_strips.scad
|
Tweaked lightstrip dimensions.
|
2020-06-21 20:35:13 +01:00 |
linear_bearing.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
linear_bearings.scad
|
Updated readme and images for linear_bearings change.
|
2020-01-11 08:57:33 +00:00 |
magnet.scad
|
Added missing vitamin() call in magnet.scad.
|
2021-01-04 01:04:04 +00:00 |
magnets.scad
|
Added missing vitamin() call in magnet.scad.
|
2021-01-04 01:04:04 +00:00 |
mains_socket.scad
|
Fixed countersink shape.
|
2020-12-10 23:27:27 +00:00 |
mains_sockets.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
microswitch.scad
|
Added microswitch_op_tol() and microswitch_fp_max() functions.
|
2021-01-24 21:44:57 +00:00 |
microswitches.scad
|
Added microswitch_op_tol() and microswitch_fp_max() functions.
|
2021-01-24 21:44:57 +00:00 |
microview.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
module.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
modules.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
nut.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
nuts.scad
|
Nuts can now have non-standard pitch, toggle switch nut pitch fixed.
|
2020-03-24 17:29:29 +00:00 |
o_ring.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
opengrab.scad
|
Added PCB components to OpenGrab and functions to access PCB.
|
2020-09-11 12:35:22 +01:00 |
panel_meter.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
panel_meters.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
pcb.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
pcbs.scad
|
Updated pictures and readme.
|
2021-02-07 22:01:26 +00:00 |
pillar.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
pillars.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
pin_header.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
pin_headers.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
psu.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
psus.scad
|
Changed PSU list order to get all the shrouds together.
|
2020-02-29 08:55:40 +00:00 |
pulley.scad
|
Added colour parameter to pulley.
|
2021-01-26 15:20:20 +00:00 |
pulleys.scad
|
Updated images and readme for new pulley.
|
2020-12-29 22:29:11 +00:00 |
rail.scad
|
Changed carriage to specify its rail type.
|
2021-02-02 12:23:03 +00:00 |
rails.scad
|
Corrected MGN9 rail end value.
|
2021-02-03 11:24:44 +00:00 |
ring_terminal.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
ring_terminals.scad
|
Added crimp version of ring terminal.
|
2019-10-22 16:12:58 +01:00 |
rocker.scad
|
Added size and slot convenience functions. Added non-rounded hole.
|
2020-12-31 11:59:41 +00:00 |
rockers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
rod.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
screw.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
screws.scad
|
Updated images and readme.
|
2021-01-26 17:03:16 +00:00 |
scs_bearing_block.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
scs_bearing_blocks.scad
|
Fixed long SCS_bearing blocks to use two short bearings and added circlips.
|
2020-03-24 17:24:08 +00:00 |
sealing_strip.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
shaft_coupling.scad
|
Used tube.scad to shorten code.
|
2020-11-13 18:55:26 +00:00 |
shaft_couplings.scad
|
type[0] should be the name of the constant.
|
2020-11-13 19:30:46 +00:00 |
sheet.scad
|
Removed woven_sheet() from the readme.
|
2020-12-24 09:01:51 +00:00 |
sheets.scad
|
Added spring steel and silicone sheets.
|
2021-02-22 15:26:19 +00:00 |
sk_bracket.scad
|
rounded_retangle() centre now defaults to false.
|
2021-02-08 09:24:00 +00:00 |
sk_brackets.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
smd.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
smds.scad
|
Added SMT resistors and 0603 LED.
|
2020-06-27 19:59:49 +01:00 |
spade.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
spades.scad
|
IEC mains connector models more accurate.
|
2019-06-20 11:59:13 +01:00 |
spool.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
spools.scad
|
Added another spool size
|
2019-10-22 15:27:49 +01:00 |
spring.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
springs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
ssr.scad
|
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
|
2021-01-15 18:12:37 +00:00 |
ssrs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
stepper_motor.scad
|
Made stepper motor encap paramatric.
|
2020-11-12 23:36:35 +00:00 |
stepper_motors.scad
|
Added NEMA17P pancake stepper motor.
|
2020-12-31 12:20:11 +00:00 |
swiss_clip.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
swiss_clips.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
toggle.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
toggles.scad
|
Fixed toggle switch part number typo.
|
2019-08-18 12:27:41 +01:00 |
transformer.scad
|
rounded_retangle() centre now defaults to false.
|
2021-02-08 09:24:00 +00:00 |
transformers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
tubing.scad
|
Fix to centering of carbon fiber tubing.
|
2020-11-13 19:27:02 +00:00 |
tubings.scad
|
Added carbon fiber tubing with woven pattern.
|
2020-11-13 09:35:56 +00:00 |
variac.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
variacs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
veroboard.scad
|
Set ngb for most library assemblies.
|
2021-02-03 06:21:44 +00:00 |
washer.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
washers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
wire.scad
|
Single backtick now used for all code quotes.
|
2020-12-24 16:04:59 +00:00 |
ziptie.scad
|
Removed redundant rounded_rectangle center = false.
|
2021-02-08 09:41:07 +00:00 |
zipties.scad
|
Fixed some more colour spellings
|
2020-03-29 21:36:11 +01:00 |