..
png
Extrusions now default to centered. New parts added to the libtest picture.
2020-02-27 17:55:03 +00:00
annotation.scad
Added source code
2019-06-08 22:10:47 +01:00
ball_bearings.scad
Added source code
2019-06-08 22:10:47 +01:00
batteries.scad
Added source code
2019-06-08 22:10:47 +01:00
belts.scad
Moved washers.scad from screws.scad to nuts.scad.
2020-02-26 13:46:11 +00:00
bezier.scad
Added source code
2019-06-08 22:10:47 +01:00
blowers.scad
Added source code
2019-06-08 22:10:47 +01:00
bom.scad
Moved washers.scad from screws.scad to nuts.scad.
2020-02-26 13:46:11 +00:00
box.scad
Moved washers.scad from screws.scad to nuts.scad.
2020-02-26 13:46:11 +00:00
bulldogs.scad
Added source code
2019-06-08 22:10:47 +01:00
butt_box.scad
Moved washers.scad from screws.scad to nuts.scad.
2020-02-26 13:46:11 +00:00
buttons.scad
Added source code
2019-06-08 22:10:47 +01:00
cable_grommets.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
cable_strips.scad
Fixed cable strip parameters and BOM desciption
2019-06-14 16:54:51 +01:00
carriers.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
clip.scad
Added source code
2019-06-08 22:10:47 +01:00
components.scad
Added source code
2019-06-08 22:10:47 +01:00
corner_block.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
d_connectors.scad
Added male screw threads.
2020-01-10 10:26:12 +00:00
displays.scad
Added source code
2019-06-08 22:10:47 +01:00
dogbones.scad
Added source code
2019-06-08 22:10:47 +01:00
door_hinge.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
door_latch.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
extrusion_brackets.scad
Extrusions now default to centered. New parts added to the libtest picture.
2020-02-27 17:55:03 +00:00
extrusions.scad
Initial submission of aluminium extrusion. Supports 2020, 2040, 2060, 2080, 3030, 3060, 4040, 4080 types.
2020-01-10 19:24:24 +00:00
fan_guard.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
fans.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
fillet.scad
Fixed fillet back to front
2019-07-28 22:08:21 +01:00
fixing_block.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
flat_hinge.scad
Added parametric printed hinges.
2019-07-19 10:30:02 +01:00
foot.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
fuseholder.scad
Added source code
2019-06-08 22:10:47 +01:00
geared_steppers.scad
Added small geared stepper and driver board.
2019-08-18 11:46:33 +01:00
global.scad
Added right_triangle.
2019-07-29 19:30:07 +01:00
green_terminals.scad
Added Duet Ethernet and Duex PCB models.
2019-07-04 12:03:38 +01:00
handle.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
hanging_hole.scad
Added source code
2019-06-08 22:10:47 +01:00
hot_ends.scad
Added source code
2019-06-08 22:10:47 +01:00
hygrometer.scad
Added missing files from last push.
2019-08-21 18:51:45 +01:00
iecs.scad
Added source code
2019-06-08 22:10:47 +01:00
inserts.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
jack.scad
Added source code
2019-06-08 22:10:47 +01:00
kp_pillow_blocks.scad
Fixed test, image and readme updated.
2020-02-26 15:24:33 +00:00
layout.scad
Added source code
2019-06-08 22:10:47 +01:00
ldrs.scad
Added LDR models
2019-07-25 11:00:04 +01:00
leadnuts.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
leds.scad
Added source code
2019-06-08 22:10:47 +01:00
light_strips.scad
Added source code
2019-06-08 22:10:47 +01:00
linear_bearings.scad
Updated readme and images for linear_bearings change.
2020-01-11 08:57:33 +00:00
mains_sockets.scad
Added source code
2019-06-08 22:10:47 +01:00
maths.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
meter.scad
Added source code
2019-06-08 22:10:47 +01:00
microswitches.scad
Added source code
2019-06-08 22:10:47 +01:00
microview.scad
Added source code
2019-06-08 22:10:47 +01:00
modules.scad
Added source code
2019-06-08 22:10:47 +01:00
nuts.scad
Unified tnuts and hammer nuts.
2020-02-24 17:40:39 +00:00
o_ring.scad
Added source code
2019-06-08 22:10:47 +01:00
offset.scad
Added source code
2019-06-08 22:10:47 +01:00
opengrab.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
pcb_mount.scad
Reduced dependecies in pcb_mount test.
2020-02-22 22:24:45 +00:00
pcb.scad
Added image and updated readme.
2020-02-26 15:55:22 +00:00
pcbs.scad
Added Arduino Leonardo
2019-08-21 16:28:32 +01:00
pillars.scad
Added male screw threads.
2020-01-10 10:26:12 +00:00
pin_headers.scad
Added right angle pin headers.
2019-10-22 16:08:15 +01:00
polyholes.scad
Added poly_tube(), an extruded poly_ring().
2019-07-19 11:03:26 +01:00
psu_shroud.scad
Added PSU shrouds.
2019-06-27 13:20:50 +01:00
psus.scad
Added source code
2019-06-08 22:10:47 +01:00
pulleys.scad
Added source code
2019-06-08 22:10:47 +01:00
quadrant.scad
Added source code
2019-06-08 22:10:47 +01:00
rails.scad
Parameterised coloring of linear rail carriage.
2020-01-12 10:20:10 +00:00
ribbon_clamp.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
ring_terminals.scad
Added crimp version of ring terminal.
2019-10-22 16:12:58 +01:00
rockers.scad
Allow setting of color of rocker switch. Defaults to current colors.
2020-01-29 17:46:32 +00:00
rod.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
round.scad
Added source code
2019-06-08 22:10:47 +01:00
rounded_cylinder.scad
Added source code
2019-06-08 22:10:47 +01:00
rounded_polygon.scad
Added source code
2019-06-08 22:10:47 +01:00
rounded_rectangle.scad
Added source code
2019-06-08 22:10:47 +01:00
screw_knob.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
screws.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
scs_bearing_blocks.scad
Extrusions now default to centered. New parts added to the libtest picture.
2020-02-27 17:55:03 +00:00
sealing_strip.scad
Added source code
2019-06-08 22:10:47 +01:00
sector.scad
Added source code
2019-06-08 22:10:47 +01:00
sheets.scad
Added source code
2019-06-08 22:10:47 +01:00
sk_brackets.scad
Extrusions now default to centered. New parts added to the libtest picture.
2020-02-27 17:55:03 +00:00
socket_box.scad
Moved printed parts to their own directory.
2019-06-11 23:20:28 +01:00
spades.scad
Added source code
2019-06-08 22:10:47 +01:00
sphere.scad
Added source code
2019-06-08 22:10:47 +01:00
spools.scad
Made more realistic and added a test.
2020-02-23 14:28:39 +00:00
springs.scad
Added source code
2019-06-08 22:10:47 +01:00
ssr_shroud.scad
Added PSU shrouds.
2019-06-27 13:20:50 +01:00
ssrs.scad
Added printed SSR shrouds
2019-06-22 12:36:07 +01:00
stepper_motors.scad
Added source code
2019-06-08 22:10:47 +01:00
strap_handle.scad
Various bug fixed from moving printed parts.
2019-06-12 11:21:53 +01:00
sweep.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
teardrops.scad
Add optional chamfer to teardrops. Defaults to no chamfer.
2020-02-25 07:46:57 +00:00
thread.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
toggles.scad
Added screw threads to most things that are threaded.
2020-02-22 19:44:01 +00:00
transformers.scad
Added source code
2019-06-08 22:10:47 +01:00
tube.scad
Added source code
2019-06-08 22:10:47 +01:00
tubings.scad
Added source code
2019-06-08 22:10:47 +01:00
variacs.scad
Added source code
2019-06-08 22:10:47 +01:00
veroboard.scad
Added source code
2019-06-08 22:10:47 +01:00
washers.scad
Added source code
2019-06-08 22:10:47 +01:00
wire.scad
Added tesrdrop option to mouse_hole.
2019-08-18 12:26:25 +01:00
zipties.scad
Added source code
2019-06-08 22:10:47 +01:00