mirror of
https://github.com/DJSundog/NopSCADlib.git
synced 2024-11-13 18:33:51 -05:00
ab592e049c
anywhere else. utils/core/core.scad is the old version without fasteners to be used internally in the library.
472 lines
20 KiB
OpenSCAD
472 lines
20 KiB
OpenSCAD
//
|
|
// NopSCADlib Copyright Chris Palmer 2018
|
|
// nop.head@gmail.com
|
|
// hydraraptor.blogspot.com
|
|
//
|
|
// This file is part of NopSCADlib.
|
|
//
|
|
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
|
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
|
// the License, or (at your option) any later version.
|
|
//
|
|
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
// See the GNU General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
|
// If not, see <https://www.gnu.org/licenses/>.
|
|
//
|
|
|
|
//
|
|
//! A box made from routed or laser cut sheet sheets and printed profiles and bezels. It can be arbitrarily large
|
|
//! compared to the 3D printed parts because they can be cut into interlocking sections and solvent welded
|
|
//! together. The box panels can be customised to have holes and parts mounted on them by overriding the
|
|
//! definitions of `box_base()`, `box_front()`, etc.
|
|
//!
|
|
//! `box.scad` should be ```use```d and `box_assembly.scad` ```include```d.
|
|
//!
|
|
//! A box is defined with a list that specifies the inside dimensions, top, bottom and side sheet materials, the
|
|
//! screw type and printed part wall thickness. This diagram shows how the various dimensions are labelled:
|
|
//! 
|
|
//!
|
|
//! Normally the side sheets are the same type but they can be overridden individually as long as the substitute has the same thickness.
|
|
//
|
|
include <../utils/core/core.scad>
|
|
use <../vitamins/sheet.scad>
|
|
use <../vitamins/screw.scad>
|
|
use <../vitamins/washer.scad>
|
|
use <../vitamins/insert.scad>
|
|
use <../utils/quadrant.scad>
|
|
|
|
bezel_clearance = 0.2;
|
|
sheet_end_clearance = 1;
|
|
sheet_slot_clearance = 0.2;
|
|
|
|
function box_screw(type) = type[0]; //! Screw type to be used at the corners
|
|
function box_wall(type) = type[1]; //! Wall thickness of 3D parts
|
|
function box_sheets(type) = type[2]; //! Sheet type used for the sides
|
|
function box_top_sheet(type) = type[3]; //! Sheet type for the top
|
|
function box_base_sheet(type)= type[4]; //! Sheet type for the bottom
|
|
function box_feet(type) = type[5]; //! True to enable feet on the bottom bezel
|
|
function box_width(type) = type[6]; //! Internal width
|
|
function box_depth(type) = type[7]; //! Internal depth
|
|
function box_height(type) = type[8]; //! Internal height
|
|
|
|
function box_bezel_clearance(type) = bezel_clearance;
|
|
|
|
function box_corner_gap(type) = 3; //! Gap between box_sheets at the corners to connect inside and outside profiles
|
|
function box_profile_overlap(type) = 3 + sheet_end_clearance / 2;
|
|
|
|
function box_washer(type) = screw_washer(box_screw(type));
|
|
function box_insert(type) = screw_insert(box_screw(type));
|
|
|
|
function box_hole_inset(type) = washer_radius(box_washer(type)) + 1;
|
|
function box_insert_r(type) = insert_hole_radius(box_insert(type));
|
|
function box_insert_l(type) = insert_length(box_insert(type));
|
|
function box_boss_r(type) = ceil(corrected_radius(box_insert_r(type)) + box_wall(type));
|
|
|
|
function box_sheet_slot(type) = sheet_thickness(box_sheets(type)) + sheet_slot_clearance; // add some clearance
|
|
function box_corner_overlap(type) = box_wall(type);
|
|
|
|
function box_corner_rad(type) = box_sheet_slot(type) - sheet_slot_clearance / 2 + box_corner_gap(type) + box_corner_overlap(type);
|
|
function box_sheet_r(type) = box_corner_rad(type) - box_sheet_slot(type) - box_corner_overlap(type);
|
|
|
|
function box_screw_length(type, top) = screw_longer_than(2 * washer_thickness(box_washer(type))
|
|
+ sheet_thickness(top ? box_top_sheet(type) : box_base_sheet(type))
|
|
+ box_corner_gap(type) + box_profile_overlap(type) + box_insert_l(type) - 1);
|
|
|
|
function box_wall_clearance(type) = box_sheet_slot(type) / 2 - sheet_thickness(box_sheets(type)) / 2;
|
|
function box_margin(type) = box_profile_overlap(type) + box_corner_gap(type); //! How much the bezel intrudes on the specified height
|
|
function box_intrusion(type) = box_hole_inset(type) + box_boss_r(type); //! Corner profile intrusion
|
|
function sheet_reduction(type) = 2 * box_corner_gap(type) + sheet_end_clearance;
|
|
function box_outset(type) = box_sheet_slot(type) + box_wall(type) - sheet_slot_clearance / 2; //! How much the bezel expands the specified internal size
|
|
function box_inset(type) = box_wall(type) + sheet_slot_clearance / 2; //! How much the bezel intrudes on the specified width and length, away from the corners
|
|
function box_bezel_height(type, bottom) = //! Bezel height for top or bottom
|
|
let(t1 = sheet_thickness(box_base_sheet(type)), t2 = sheet_thickness(box_top_sheet(type)))
|
|
box_corner_rad(type) + box_profile_overlap(type) + (bottom ? max(t1, t2) : t2) - sheet_thickness(box_sheets(type));
|
|
|
|
grill_hole = 5;
|
|
grill_gap = 1.9;
|
|
module grill(width, height, r = 1000, poly = false, h = 0) { //! A staggered array of 5mm holes to make grills in sheets. Can be constrained to be circular. Set ```poly``` ```true``` for printing, ```false``` for milling.
|
|
nx = floor(width / (grill_hole + grill_gap));
|
|
xpitch = width / nx;
|
|
ny = floor(height / ((grill_hole + grill_gap) * cos(30)));
|
|
ypitch = height / ny;
|
|
|
|
extrude_if(h)
|
|
for(y = [0 : ny - 1], x = [0 : nx - 1 - (y % 2)]) {
|
|
x = -width / 2 + (x + 0.5 + (y % 2) / 2) * xpitch;
|
|
y = -height / 2 + (y + 0.5) * ypitch;
|
|
if(sqrt(sqr(x) + sqr(y)) + grill_hole / 2 <= r)
|
|
translate([x, y])
|
|
if(poly)
|
|
poly_circle(r = grill_hole / 2);
|
|
else
|
|
circle(d = grill_hole);
|
|
}
|
|
}
|
|
|
|
module box_corner_profile_2D(type) { //! The 2D shape of the corner profile.
|
|
t = box_sheet_slot(type);
|
|
difference() {
|
|
union() {
|
|
quadrant(box_hole_inset(type) + box_boss_r(type), box_boss_r(type)); // inside corner
|
|
|
|
translate([box_corner_gap(type) + box_profile_overlap(type), box_corner_gap(type) + box_profile_overlap(type)])
|
|
rotate(180)
|
|
quadrant(box_profile_overlap(type) + box_corner_rad(type), box_corner_rad(type)); // outside corner
|
|
}
|
|
translate([box_corner_gap(type), -t + sheet_slot_clearance / 2])
|
|
square([100, t]);
|
|
|
|
translate([-t + sheet_slot_clearance / 2, box_corner_gap(type)])
|
|
square([t, 100]);
|
|
}
|
|
}
|
|
|
|
module box_corner_profile(type) { //! Generates the corner profile STL for 3D printing.
|
|
stl("box_corner_profile");
|
|
|
|
length = box_height(type) - 2 * box_margin(type);
|
|
difference() {
|
|
linear_extrude(height = length, center = true, convexity = 5)
|
|
box_corner_profile_2D(type);
|
|
|
|
for(z = [-1, 1])
|
|
translate([box_hole_inset(type), box_hole_inset(type), z * length / 2])
|
|
insert_hole(box_insert(type), 5);
|
|
}
|
|
}
|
|
|
|
module box_corner_profile_section(type, section, sections) { //! Generates interlocking sections of the corner profile to allow it to be taller than the printer
|
|
overlap = 4;
|
|
length = box_height(type) - 2 * box_margin(type);
|
|
section_length = round_to_layer((length - overlap) / sections);
|
|
last_section = section >= sections - 1;
|
|
h = last_section ? length - (sections - 1) * section_length : section_length;
|
|
overlap_wall = 2;
|
|
|
|
difference() {
|
|
union() {
|
|
linear_extrude(height = h, convexity = 5)
|
|
box_corner_profile_2D(type);
|
|
|
|
if(!last_section) // male end always at the top
|
|
translate_z(section_length - 1)
|
|
for(i = [0 : 1], offset = i * layer_height)
|
|
linear_extrude(height = overlap + 1 - offset)
|
|
offset(1 + offset - layer_height)
|
|
offset(-overlap_wall - 1)
|
|
box_corner_profile_2D(type);
|
|
}
|
|
if(section > 0)
|
|
translate_z(last_section ? h : 0) { // female at bottom unless last section
|
|
linear_extrude(height = 2 * (overlap + layer_height), center = true, convexity = 5)
|
|
offset(-overlap_wall)
|
|
box_corner_profile_2D(type);
|
|
|
|
linear_extrude(height = 2 * layer_height, center = true, convexity = 5)
|
|
offset(-overlap_wall + layer_height)
|
|
box_corner_profile_2D(type);
|
|
}
|
|
if(!section || last_section) // insert holes always at the bottom
|
|
translate([box_hole_inset(type), box_hole_inset(type)])
|
|
insert_hole(box_insert(type), 5);
|
|
}
|
|
}
|
|
|
|
module box_corner_quadrants(type, width, depth)
|
|
for(corner = [0:3]) {
|
|
x = [-1,1,1,-1][corner];
|
|
y = [-1,-1,1,1][corner];
|
|
|
|
translate([x * width / 2, y * depth / 2, 0])
|
|
rotate(corner * 90)
|
|
quadrant(box_intrusion(type), box_boss_r(type));
|
|
}
|
|
|
|
module box_bezel(type, bottom) { //! Generates top and bottom bezel STLs
|
|
stl(bottom ? "bottom_bezel" : "top_bezel");
|
|
feet = bottom && box_feet(type);
|
|
t = box_sheet_slot(type);
|
|
outset = box_outset(type);
|
|
inner_r = box_sheet_r(type);
|
|
foot_height = box_corner_gap(type) + sheet_thickness(box_base_sheet(type)) + washer_thickness(box_washer(type)) + screw_head_height(box_screw(type)) + box_profile_overlap(type) + 2;
|
|
foot_length = box_corner_rad(type) * 2;
|
|
height = box_bezel_height(type, bottom);
|
|
foot_extension = foot_height - height;
|
|
|
|
difference() {
|
|
translate_z(-box_profile_overlap(type)) difference() {
|
|
rounded_rectangle([box_width(type) + 2 * outset, box_depth(type) + 2 * outset, feet ? foot_height : height], box_corner_rad(type), false);
|
|
//
|
|
// Remove edges between the feet
|
|
//
|
|
if(feet)
|
|
hull() {
|
|
translate_z(height + 0.5)
|
|
cube([box_width(type) - 2 * foot_length, box_depth(type) + 2 * outset + 1, 1], center = true);
|
|
|
|
translate_z(foot_height + 1)
|
|
cube([box_width(type) - 2 * (foot_length - foot_extension), box_depth(type) + 2 * outset + 1, 1], center = true);
|
|
}
|
|
if(feet)
|
|
hull() {
|
|
translate_z(height + 0.5)
|
|
cube([box_width(type) + 2 * outset + 1, box_depth(type) - 2 * foot_length, 1], center = true);
|
|
|
|
translate_z(foot_height + 1)
|
|
cube([box_width(type) + 2 * outset + 1, box_depth(type) - 2 * (foot_length - foot_extension), 1], center = true);
|
|
}
|
|
}
|
|
//
|
|
// slots for side panels
|
|
//
|
|
translate_z(-box_profile_overlap(type))
|
|
linear_extrude(height = 2 * box_profile_overlap(type), center = true)
|
|
for(i = [-1, 1]) {
|
|
translate([i * (box_width(type) / 2 + t / 2 - sheet_slot_clearance / 2), 0])
|
|
square([t, box_depth(type) - 2 * box_corner_gap(type)], center = true);
|
|
|
|
translate([0, i * (box_depth(type) / 2 + t / 2 - sheet_slot_clearance / 2)])
|
|
square([box_width(type) - 2 * box_corner_gap(type), t], center = true);
|
|
}
|
|
//
|
|
// recess for top / bottom panel
|
|
//
|
|
translate_z(box_corner_gap(type))
|
|
rounded_rectangle([box_width(type) + bezel_clearance, box_depth(type) + bezel_clearance, height], inner_r + bezel_clearance / 2, false);
|
|
//
|
|
// leave plastic over the corner profiles
|
|
//
|
|
translate_z(-box_profile_overlap(type) - 1)
|
|
linear_extrude(height = box_profile_overlap(type) + box_corner_gap(type) + 2)
|
|
union() {
|
|
difference() {
|
|
square([box_width(type) - 2 * box_inset(type),
|
|
box_depth(type) - 2 * box_inset(type)], center = true);
|
|
|
|
box_corner_quadrants(type, box_width(type), box_depth(type));
|
|
}
|
|
box_screw_hole_positions(type)
|
|
poly_circle(screw_clearance_radius(box_screw(type)));
|
|
}
|
|
}
|
|
}
|
|
|
|
dowel_length = 20;
|
|
dowel_wall = extrusion_width * 3;
|
|
dowel_h_wall = layer_height * 6;
|
|
|
|
|
|
module box_bezel_section(type, bottom, rows, cols, x, y) { //! Generates interlocking sections of the bezel to allow it to be bigger than the printer
|
|
w = (box_width(type) + 2 * box_outset(type)) / cols;
|
|
h = (box_depth(type) + 2 * box_outset(type)) / rows;
|
|
bw = box_outset(type) - bezel_clearance / 2;
|
|
bw2 = box_outset(type) + box_inset(type);
|
|
|
|
dw = bw - 2 * dowel_wall;
|
|
dh = box_bezel_height(type, bottom) - dowel_h_wall;
|
|
|
|
dh2 = box_profile_overlap(type) + box_corner_gap(type) - dowel_h_wall;
|
|
|
|
end_clearance = 0.5;
|
|
module male() {
|
|
rotate([90, 0, 90])
|
|
linear_extrude(height = dowel_length - 2 * end_clearance, center = true)
|
|
difference() {
|
|
union() {
|
|
h = dh - layer_height;
|
|
h2 = dh2 - layer_height;
|
|
hull() {
|
|
translate([bw / 2, h / 2])
|
|
square([dw - 1, h], center = true);
|
|
|
|
translate([bw / 2, (h - 1) / 2])
|
|
square([dw, h - 1], center = true);
|
|
}
|
|
|
|
hull() {
|
|
translate([bw2 / 2, h2 / 2])
|
|
square([bw2 - 2 * dowel_wall - 1, h2], center = true);
|
|
|
|
translate([bw2 / 2, (h2 - 1) / 2])
|
|
square([bw2 - 2 * dowel_wall, h2 - 1], center = true);
|
|
}
|
|
}
|
|
translate([bw2 / 2, 0])
|
|
square([box_sheet_slot(type), 2 * box_profile_overlap(type)], center = true);
|
|
}
|
|
}
|
|
|
|
module female() {
|
|
union() {
|
|
translate([0, bw / 2, dh / 2])
|
|
cube([dowel_length, dw, dh], center = true);
|
|
|
|
translate([0, bw2 / 2])
|
|
cube([dowel_length, bw2 - 2 * dowel_wall, dh2 * 2], center = true);
|
|
|
|
hull() {
|
|
translate([0, bw / 2, dh / 2])
|
|
cube([2, dw, dh], center = true);
|
|
|
|
translate([0, bw / 2, dh / 2])
|
|
cube([eps, dw + 2 * extrusion_width, dh], center = true);
|
|
|
|
}
|
|
hull() {
|
|
translate([0, bw2 / 2, dh2 / 2])
|
|
cube([2, bw2 - 2 * dowel_wall, dh2], center = true);
|
|
|
|
translate([0, bw2 / 2, dh2 / 2])
|
|
cube([eps, bw2 - 2 * dowel_wall + 2 * extrusion_width, dh2], center = true);
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
module support() {
|
|
if(!$preview)
|
|
translate([0, bw / 2 + dw / 2])
|
|
cube([dowel_length / 2 - 0.25, 2 * extrusion_width + 0.2, dh2]);
|
|
}
|
|
|
|
union() {
|
|
render() difference() {
|
|
union() {
|
|
clip(xmin = 0, xmax = w, ymin = 0, ymax = h)
|
|
translate([box_width(type) / 2 + box_outset(type) - x * w, box_depth(type) / 2 + box_outset(type) - y * h, box_profile_overlap(type)])
|
|
box_bezel(type, bottom);
|
|
|
|
if(x < cols - 1 && y == 0)
|
|
translate([w, 0])
|
|
male();
|
|
|
|
if(x > 0 && y == rows - 1)
|
|
translate([0, h])
|
|
rotate(180)
|
|
male();
|
|
|
|
if(y < rows - 1 && x == cols - 1)
|
|
translate([w, h])
|
|
rotate(90)
|
|
male();
|
|
|
|
if(y > 0 && x == 0)
|
|
rotate(-90)
|
|
male();
|
|
}
|
|
|
|
if(x < cols - 1 && y == rows - 1)
|
|
translate([w, h])
|
|
rotate(180)
|
|
female();
|
|
|
|
if(x > 0 && y == 0)
|
|
female();
|
|
|
|
if(y < rows - 1 && x == 0)
|
|
translate([0, h])
|
|
rotate(-90)
|
|
female();
|
|
|
|
if(y > 0 && x == cols - 1)
|
|
translate([w, 0])
|
|
rotate(90)
|
|
female();
|
|
}
|
|
if(x < cols - 1 && y == rows - 1)
|
|
translate([w, h])
|
|
rotate(180)
|
|
support();
|
|
|
|
if(x > 0 && y == 0)
|
|
support();
|
|
|
|
if(y < rows - 1 && x == 0)
|
|
translate([0, h])
|
|
rotate(-90)
|
|
support();
|
|
|
|
if(y > 0 && x == cols - 1)
|
|
translate([w, 0])
|
|
rotate(90)
|
|
support();
|
|
}
|
|
}
|
|
|
|
|
|
module box_screw_hole_positions(type)
|
|
for(x = [-1, 1], y = [-1, 1])
|
|
translate([x * (box_width(type) / 2 - box_hole_inset(type)), y * (box_depth(type) / 2 - box_hole_inset(type))])
|
|
children();
|
|
|
|
module box_base_blank(type) { //! Generates a 2D template for the base sheet
|
|
dxf("box_base");
|
|
|
|
difference() {
|
|
sheet_2D(box_base_sheet(type), box_width(type), box_depth(type), box_sheet_r(type));
|
|
|
|
box_screw_hole_positions(type)
|
|
drill(screw_clearance_radius(box_screw(type)), 0);
|
|
}
|
|
}
|
|
|
|
module box_top_blank(type) { //! Generates a 2D template for the top sheet
|
|
dxf("box_top");
|
|
|
|
difference() {
|
|
sheet_2D(box_top_sheet(type), box_width(type), box_depth(type), box_sheet_r(type));
|
|
|
|
box_screw_hole_positions(type)
|
|
drill(screw_clearance_radius(box_screw(type)), 0);
|
|
}
|
|
}
|
|
|
|
function subst_sheet(type, sheet) =
|
|
let(s = box_sheets(type))
|
|
sheet ? assert(sheet_thickness(sheet) == sheet_thickness(s)) sheet : s;
|
|
|
|
module box_shelf_blank(type, sheet = false) { //! Generates a 2D template for a shelf sheet
|
|
dxf("box_shelf");
|
|
|
|
difference() {
|
|
sheet_2D(subst_sheet(type, sheet), box_width(type) - bezel_clearance, box_depth(type) - bezel_clearance, 1);
|
|
|
|
offset(bezel_clearance / 2)
|
|
box_corner_quadrants(type, box_width(type), box_depth(type));
|
|
}
|
|
}
|
|
|
|
module box_left_blank(type, sheet = false) { //! Generates a 2D template for the left sheet, ```sheet``` can be set to override the type
|
|
dxf("box_left");
|
|
|
|
sheet_2D(subst_sheet(type, sheet), box_depth(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
|
|
}
|
|
|
|
module box_right_blank(type, sheet = false) { //! Generates a 2D template for the right sheet, ```sheet``` can be set to override the type
|
|
dxf("box_right");
|
|
|
|
sheet_2D(subst_sheet(type, sheet), box_depth(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
|
|
}
|
|
|
|
module box_front_blank(type, sheet = false) { //! Generates a 2D template for the front sheet, ```sheet``` can be set to override the type
|
|
dxf("box_front");
|
|
|
|
sheet_2D(subst_sheet(type, sheet), box_width(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
|
|
}
|
|
|
|
module box_back_blank(type, sheet = false) { //! Generates a 2D template for the back sheet, ```sheet``` can be set to override the type
|
|
dxf("box_back");
|
|
|
|
sheet_2D(subst_sheet(type, sheet), box_width(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
|
|
}
|
|
|
|
module box_base(type) render_2D_sheet(box_base_sheet(type)) box_base_blank(type); //! Default base, can be overridden to customise
|
|
module box_top(type) render_2D_sheet(box_top_sheet(type)) box_top_blank(type); //! Default top, can be overridden to customise
|
|
module box_back(type) render_2D_sheet(box_sheets(type)) box_back_blank(type); //! Default back, can be overridden to customise
|
|
module box_front(type) render_2D_sheet(box_sheets(type)) box_front_blank(type); //! Default front, can be overridden to customise
|
|
module box_left(type) render_2D_sheet(box_sheets(type)) box_left_blank(type); //! Default left side, can be overridden to customise
|
|
module box_right(type) render_2D_sheet(box_sheets(type)) box_right_blank(type); //! Default right side, can be overridden to customise
|