325 lines
14 KiB
OpenSCAD
325 lines
14 KiB
OpenSCAD
//
|
|
// NopSCADlib Copyright Chris Palmer 2020
|
|
// nop.head@gmail.com
|
|
// hydraraptor.blogspot.com
|
|
//
|
|
// This file is part of NopSCADlib.
|
|
//
|
|
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
|
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
|
// the License, or (at your option) any later version.
|
|
//
|
|
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
// See the GNU General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
|
// If not, see <https://www.gnu.org/licenses/>.
|
|
//
|
|
|
|
//
|
|
//! Parametric cable drag chain to limit the bend radius of a cable run.
|
|
//!
|
|
//! Each link has a maximum bend angle of 45°, so the mininium radius is proportional to the link length.
|
|
//!
|
|
//! The travel property is how far it can move in each direction, i.e. half the maximum travel if the chain is mounted in the middle of the travel.
|
|
//!
|
|
//! The ends can have screw lugs with four screw positions to choose from, specified by a list of two arrays of four bools.
|
|
//! If none are enabled then a child object is expected to customise the end and this gets unioned with the blank end.
|
|
//! If both ends are customised then two children are expected.
|
|
//! Each child is called twice, once with `$fasteners` set to 0 to augment the STL and again with `$fasteners` set to 1 to add
|
|
//! to the assembly, for example to add inserts.
|
|
//
|
|
|
|
include <../core.scad>
|
|
use <../utils/horiholes.scad>
|
|
use <../utils/maths.scad>
|
|
|
|
clearance = 0.1;
|
|
|
|
function drag_chain_name(type) = type[0]; //! The name to allow more than one in a project
|
|
function drag_chain_size(type) = type[1]; //! The internal size and link length
|
|
function drag_chain_travel(type) = type[2]; //! X travel
|
|
function drag_chain_wall(type) = type[3]; //! Side wall thickness
|
|
function drag_chain_bwall(type) = type[4]; //! Bottom wall
|
|
function drag_chain_twall(type) = type[5]; //! Top wall
|
|
function drag_chain_screw(type) = type[6]; //! Mounting screw for the ends
|
|
function drag_chain_screw_lists(type) = type[7]; //! Two lists of four bools to say which screws positions are used
|
|
|
|
function drag_chain_clearance() = clearance; //! Clearance around joints.
|
|
|
|
function drag_chain_radius(type) = //! The bend radius at the pivot centres
|
|
let(s = drag_chain_size(type))
|
|
s.x / 2 / sin(360 / 16);
|
|
|
|
function drag_chain_z(type) = //! Outside dimension of a 180 bend
|
|
let(os = drag_chain_outer_size(type), s = drag_chain_size(type))
|
|
2 * drag_chain_radius(type) + os.z;
|
|
|
|
function drag_chain(name, size, travel, wall = 1.6, bwall = 1.5, twall = 1.5, screw = M2_cap_screw, screw_lists = [[1,0,0,1],[1,0,0,1]]) = //! Constructor
|
|
[name, size, travel, wall, bwall, twall, screw, screw_lists];
|
|
|
|
function drag_chain_outer_size(type) = //! Link outer dimensions
|
|
let(s = drag_chain_size(type), z = s.z + drag_chain_bwall(type) + drag_chain_twall(type))
|
|
[s.x + z, s.y + 4 * drag_chain_wall(type) + 2 * clearance, z];
|
|
|
|
function screw_lug_radius(screw) = //! Radius of a screw lug
|
|
corrected_radius(screw_clearance_radius(screw)) + 3.1 * extrusion_width;
|
|
|
|
module screw_lug(screw, h = 0) //! Create a D shaped lug for a screw
|
|
extrude_if(h, center = false)
|
|
difference() {
|
|
r = screw_lug_radius(screw);
|
|
hull() {
|
|
circle4n(r);
|
|
|
|
translate([-r, -r])
|
|
square([2 * r, eps]);
|
|
}
|
|
poly_circle(screw_clearance_radius(screw));
|
|
}
|
|
|
|
function bool2int(b) = b ? 1 : 0;
|
|
|
|
module drag_chain_screw_positions(type, end) { //! Place children at the screw positions, end = 0 for the start, 1 for the end
|
|
r = screw_lug_radius(drag_chain_screw(type));
|
|
s = drag_chain_size(type);
|
|
os = drag_chain_outer_size(type);
|
|
R = os.z / 2;
|
|
x0 = end ? R + norm([drag_chain_cam_x(type), R - drag_chain_twall(type)]) + clearance + r : r;
|
|
x1 = end ? os.x - r : os.x - 2 * R - clearance - r;
|
|
for(i = [0 : 3], x = [x0, x1, x0, x1][i], y = [-1, -1, 1, 1][i])
|
|
if(drag_chain_screw_lists(type)[bool2int(end)][i])
|
|
translate([x, y * (s.y / 2 + r)])
|
|
let($a = [180, 0, 180, 0][i])
|
|
children();
|
|
}
|
|
|
|
function drag_chain_cam_x(type) = // how far the cam sticks out
|
|
let(s = drag_chain_size(type),
|
|
r = drag_chain_outer_size(type).z / 2,
|
|
wall = drag_chain_wall(type),
|
|
cam_r = s.x - 2 * clearance - wall - r, // inner_x_normal - clearance - r
|
|
twall = drag_chain_twall(type)
|
|
) min(sqrt(max(sqr(cam_r) - sqr(r - twall), 0)), r);
|
|
|
|
module drag_chain_link(type, start = false, end = false, check_kids = true) { //! One link of the chain, special case for start and end
|
|
stl(str(drag_chain_name(type), "_drag_chain_link", start ? "_start" : end ? "_end" : ""));
|
|
|
|
s = drag_chain_size(type);
|
|
wall = drag_chain_wall(type);
|
|
bwall = drag_chain_bwall(type);
|
|
twall = drag_chain_twall(type);
|
|
os = drag_chain_outer_size(type);
|
|
r = os.z / 2;
|
|
pin_r = r / 2;
|
|
|
|
socket_x = r;
|
|
pin_x = socket_x + s.x;
|
|
|
|
outer_normal_x = pin_x - r - clearance; // s.x - clearance
|
|
outer_end_x = end ? os.x : outer_normal_x;
|
|
|
|
inner_x = start ? 0 : outer_normal_x - wall; // s.x - clearance - wall
|
|
|
|
roof_x_normal = 2 * r - twall;
|
|
roof_x = start ? 0 : roof_x_normal;
|
|
|
|
floor_x = start ? 0 : 2 * r;
|
|
cam_x = drag_chain_cam_x(type);
|
|
assert(r + norm([drag_chain_cam_x(type), r - drag_chain_twall(type)]) + clearance <= inner_x || start, "Link must be longer");
|
|
|
|
difference() {
|
|
union() {
|
|
for(side = [-1, 1])
|
|
rotate([90, 0, 0]) {
|
|
// Outer cheeks
|
|
translate_z(side * (os.y / 2 - wall / 2))
|
|
linear_extrude(wall, center = true)
|
|
difference() {
|
|
hull() {
|
|
if(start)
|
|
square([eps, os.z]);
|
|
else
|
|
translate([socket_x, r])
|
|
rotate(180)
|
|
teardrop(r = r, h = 0);
|
|
|
|
translate([outer_end_x - eps, 0])
|
|
square([eps, os.z]);
|
|
}
|
|
if(!start)
|
|
translate([socket_x, r])
|
|
horihole(pin_r, r);
|
|
}
|
|
// Inner cheeks
|
|
translate_z(side * (s.y / 2 + wall / 2))
|
|
linear_extrude(wall, center = true)
|
|
difference() {
|
|
union() {
|
|
hull() {
|
|
if(!end) {
|
|
translate([pin_x, r])
|
|
rotate(180)
|
|
teardrop(r = r, h = 0);
|
|
|
|
translate([pin_x, twall])
|
|
square([cam_x, eps]);
|
|
}
|
|
else
|
|
translate([os.x - eps, 0])
|
|
square([eps, os.z]);
|
|
|
|
translate([inner_x, 0])
|
|
square([eps, os.z]);
|
|
}
|
|
}
|
|
// Cutout for top wall
|
|
if(!end)
|
|
intersection() {
|
|
translate([pin_x - r, 0])
|
|
square([3 * r, twall]); // When straight
|
|
|
|
translate([pin_x, r])
|
|
rotate(-45)
|
|
translate([-r + roof_x_normal, -r - twall]) // When bent fully
|
|
square(os.z);
|
|
}
|
|
}
|
|
// Pin
|
|
if(!end)
|
|
translate([pin_x, r, side * (s.y / 2 + wall + clearance)])
|
|
horicylinder(r = pin_r, z = r, h = 2 * wall);
|
|
|
|
// Cheek joint
|
|
translate([inner_x, 0, side * (s.y / 2 + wall) - 0.5])
|
|
cube([outer_end_x - inner_x, os.z, 1]);
|
|
}
|
|
|
|
// Roof, actually the floor when printed
|
|
roof_end = end ? s.x + 2 * r : s.x + r - twall - clearance;
|
|
translate([roof_x, -s.y / 2 - 0.5])
|
|
cube([roof_end - roof_x , s.y + 1, twall]);
|
|
|
|
translate([roof_x, -os.y / 2 + 0.5])
|
|
cube([s.x - clearance - roof_x, os.y - 1, twall]);
|
|
|
|
// Floor, actually the roof when printed
|
|
floor_end = end ? s.x + 2 * r : s.x + r;
|
|
translate([floor_x, -s.y / 2 - wall, os.z - bwall])
|
|
cube([floor_end - floor_x, s.y + 2 * wall, bwall]);
|
|
|
|
translate([floor_x, -os.y / 2 + 0.5, os.z - bwall])
|
|
cube([s.x - floor_x - clearance, os.y -1, bwall]);
|
|
|
|
if(start || end) {
|
|
drag_chain_screw_positions(type, end)
|
|
rotate($a)
|
|
screw_lug(drag_chain_screw(type), os.z);
|
|
|
|
if(check_kids) {
|
|
custom = drag_chain_screw_lists(type)[bool2int(end)] == [0, 0, 0, 0];
|
|
assert($children == bool2int(custom), str("wrong number of children for ", end ? "end" : "start", " STL customisation: ", $children));
|
|
}
|
|
children();
|
|
}
|
|
}
|
|
if(start || end)
|
|
translate_z(-eps)
|
|
drag_chain_screw_positions(type, end)
|
|
rotate($a)
|
|
poly_cylinder(r = screw_clearance_radius(drag_chain_screw(type)), h = os.z + 2 * eps, center = false);
|
|
|
|
}
|
|
|
|
if(show_supports() && !end) {
|
|
for(side = [-1, 1]) {
|
|
w = 2.1 * extrusion_width;
|
|
translate([s.x + r + cam_x - w / 2, side * (s.y / 2 + wall / 2), twall / 2])
|
|
cube([w, wall, twall], center = true);
|
|
|
|
h = round_to_layer(r - pin_r / sqrt(2));
|
|
y = s.y / 2 + max(wall + w / 2 + clearance, 2 * wall + clearance - w / 2);
|
|
translate([s.x + r, side * y, h / 2])
|
|
cube([pin_r * sqrt(2), w, h], center = true);
|
|
|
|
gap = cam_x - pin_r / sqrt(2) + extrusion_width;
|
|
translate([s.x + r + cam_x - gap / 2, side * (s.y / 2 + wall + clearance / 2), layer_height / 2])
|
|
cube([gap, 2 * wall + clearance, layer_height], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Need to use a wrapper because can't define nested modules in an assembly
|
|
module _drag_chain_assembly(type, pos = 0, render = false) {
|
|
s = drag_chain_size(type);
|
|
x = (1 + exploded()) * s.x;
|
|
r = drag_chain_radius(type) * x / s.x;
|
|
travel = drag_chain_travel(type);
|
|
links = ceil(travel / s.x);
|
|
actual_travel = links * s.x;
|
|
z = drag_chain_outer_size(type).z;
|
|
|
|
zb = z / 2; // z of bottom track
|
|
c = [actual_travel / 2 + pos / 2, 0, r + zb]; // centre of bend
|
|
|
|
points = [ // Calculate list of hinge points
|
|
for(i = 0, p = [0, 0, z / 2 + 2 * r]; i < links + 5;
|
|
i = i + 1,
|
|
dx = p.z > c.z ? x : -x,
|
|
p = max(p.x + dx, p.x) <= c.x ? p + [dx, 0, 0] // Straight sections
|
|
: let(q = circle_intersect(p, x, c, r))
|
|
q.x <= c.x ? [p.x - sqrt(sqr(x) - sqr(p.z - zb)), 0, zb] // Transition back to straight
|
|
: q) // Circular section
|
|
p
|
|
];
|
|
npoints = len(points);
|
|
|
|
module link(n) // Position and colour link with origin at the hinge hole
|
|
translate([-z / 2, 0, -z / 2]) {
|
|
stl_colour(n < 0 || n == npoints - 1 ? pp3_colour : n % 2 ? pp1_colour : pp2_colour)
|
|
render_if(render)
|
|
drag_chain_link(type, start = n == -1, end = n == npoints - 1, check_kids = false)
|
|
let($fasteners = 0)
|
|
children();
|
|
|
|
let($fasteners = 1) children();
|
|
}
|
|
|
|
screws = drag_chain_screw_lists(type);
|
|
custom_start = screws[0] == [0, 0, 0, 0];
|
|
custom_end = screws[1] == [0, 0, 0, 0];
|
|
assert($children == bool2int(custom_start) + bool2int(custom_end), str("wrong number of children for end customisation: ", $children));
|
|
|
|
for(i = [0 : npoints - 2]) let(v = points[i + 1] - points[i])
|
|
translate(points[i])
|
|
rotate([0, -atan2(v.z, v.x), 0])
|
|
link(i);
|
|
|
|
translate(points[0] - [x, 0, 0])
|
|
link(-1)
|
|
if(custom_start)
|
|
children(0);
|
|
|
|
translate(points[npoints - 1])
|
|
hflip()
|
|
link(npoints - 1)
|
|
if(custom_end)
|
|
children(custom_start ? 1 : 0);
|
|
}
|
|
|
|
//! 1. Remove the support material from the links with side cutters.
|
|
//! 1. Clip the links together with the special ones at the ends.
|
|
module drag_chain_assembly(type, pos = 0, render = false) //! Drag chain assembly
|
|
assembly(str(drag_chain_name(type), "_drag_chain"), big = true)
|
|
if($children == 2)
|
|
_drag_chain_assembly(type, pos, render) {
|
|
children(0);
|
|
children(1);
|
|
}
|
|
else if($children == 1)
|
|
_drag_chain_assembly(type, pos, render)
|
|
children(0);
|
|
else
|
|
_drag_chain_assembly(type, pos, render);
|