Updated images and readme.

This commit is contained in:
Chris Palmer 2020-03-15 17:35:21 +00:00
parent b6a32b6b41
commit fd8712d6bf
4 changed files with 11 additions and 2 deletions

Binary file not shown.

Before

Width:  |  Height:  |  Size: 783 KiB

After

Width:  |  Height:  |  Size: 786 KiB

View File

@ -151,13 +151,13 @@ translate([890, 730])
printed_boxes(); printed_boxes();
translate([850, 1260]) translate([850, 1300])
bbox_test(); bbox_test();
inserts_y = 0; inserts_y = 0;
nuts_y = inserts_y + 20; nuts_y = inserts_y + 20;
washers_y = nuts_y + 100; washers_y = nuts_y + 120;
screws_y = washers_y + 120; screws_y = washers_y + 120;
o_rings_y = screws_y + 130; o_rings_y = screws_y + 130;
springs_y = o_rings_y + 20; springs_y = o_rings_y + 20;

View File

@ -1689,6 +1689,9 @@ If a nut is given a child then it gets placed on its top surface.
|:--- |:--- | |:--- |:--- |
| ```nut_radius(type)``` | Radius across the corners | | ```nut_radius(type)``` | Radius across the corners |
| ```nut_size(type)``` | Diameter of the corresponding screw | | ```nut_size(type)``` | Diameter of the corresponding screw |
| ```nut_square_size(type)``` | Diameter of the corresponding screw |
| ```nut_square_thickness(type)``` | Thickness of the square nut |
| ```nut_square_width(type)``` | Width of the square nut |
| ```nut_trap_depth(type)``` | Depth of nut trap | | ```nut_trap_depth(type)``` | Depth of nut trap |
| ```nut_washer(type)``` | Corresponding washer | | ```nut_washer(type)``` | Corresponding washer |
@ -1705,6 +1708,7 @@ If a nut is given a child then it gets placed on its top surface.
|:--- |:--- | |:--- |:--- |
| ```nut(type, nyloc = false, brass = false, nylon = false)``` | Draw specified nut | | ```nut(type, nyloc = false, brass = false, nylon = false)``` | Draw specified nut |
| ```nut_and_washer(type, nyloc)``` | Draw nut with corresponding washer | | ```nut_and_washer(type, nyloc)``` | Draw nut with corresponding washer |
| ```nut_square(type, brass = false, nylon = false)``` | Draw specified square nut |
| ```nut_trap(screw, nut, depth = 0, horizontal = false, supported = false, h = 200)``` | Make a nut trap | | ```nut_trap(screw, nut, depth = 0, horizontal = false, supported = false, h = 200)``` | Make a nut trap |
| ```wingnut(type)``` | Draw a wingnut | | ```wingnut(type)``` | Draw a wingnut |
@ -1723,18 +1727,23 @@ If a nut is given a child then it gets placed on its top surface.
| 1 | ```nut(M3_nut)``` | Nut M3 x 2.4mm | | 1 | ```nut(M3_nut)``` | Nut M3 x 2.4mm |
| 1 | ```nut(M3_nut, brass = true)``` | Nut M3 x 2.4mm brass | | 1 | ```nut(M3_nut, brass = true)``` | Nut M3 x 2.4mm brass |
| 1 | ```nut(M3_nut, nyloc = true)``` | Nut M3 x 2.4mm nyloc | | 1 | ```nut(M3_nut, nyloc = true)``` | Nut M3 x 2.4mm nyloc |
| 1 | ```nut(M3nS_thin_nut)``` | Nut M3nS 5.5 x 1.8mm |
| 1 | ```sliding_t_nut(M4_hammer_nut)``` | Nut M4 hammer | | 1 | ```sliding_t_nut(M4_hammer_nut)``` | Nut M4 hammer |
| 1 | ```sliding_t_nut(M4_sliding_t_nut)``` | Nut M4 sliding T | | 1 | ```sliding_t_nut(M4_sliding_t_nut)``` | Nut M4 sliding T |
| 1 | ```nut(M4_nut)``` | Nut M4 x 3.2mm | | 1 | ```nut(M4_nut)``` | Nut M4 x 3.2mm |
| 1 | ```nut(M4_nut, nyloc = true)``` | Nut M4 x 3.2mm nyloc | | 1 | ```nut(M4_nut, nyloc = true)``` | Nut M4 x 3.2mm nyloc |
| 1 | ```nut(M4nS_thin_nut)``` | Nut M4nS 7 x 2.2mm |
| 1 | ```sliding_t_nut(M5_sliding_t_nut)``` | Nut M5 sliding T | | 1 | ```sliding_t_nut(M5_sliding_t_nut)``` | Nut M5 sliding T |
| 1 | ```nut(M5_nut)``` | Nut M5 x 4mm | | 1 | ```nut(M5_nut)``` | Nut M5 x 4mm |
| 1 | ```nut(M5_nut, nyloc = true)``` | Nut M5 x 4mm nyloc | | 1 | ```nut(M5_nut, nyloc = true)``` | Nut M5 x 4mm nyloc |
| 1 | ```nut(M5nS_thin_nut)``` | Nut M5nS 8 x 2.7mm |
| 1 | ```nut(M6_half_nut)``` | Nut M6 x 3mm | | 1 | ```nut(M6_half_nut)``` | Nut M6 x 3mm |
| 1 | ```nut(M6_nut)``` | Nut M6 x 5mm | | 1 | ```nut(M6_nut)``` | Nut M6 x 5mm |
| 1 | ```nut(M6_nut, nyloc = true)``` | Nut M6 x 5mm nyloc | | 1 | ```nut(M6_nut, nyloc = true)``` | Nut M6 x 5mm nyloc |
| 1 | ```nut(M6nS_thin_nut)``` | Nut M6nS 10 x 3.2mm |
| 1 | ```nut(M8_nut)``` | Nut M8 x 6.5mm | | 1 | ```nut(M8_nut)``` | Nut M8 x 6.5mm |
| 1 | ```nut(M8_nut, nyloc = true)``` | Nut M8 x 6.5mm nyloc | | 1 | ```nut(M8_nut, nyloc = true)``` | Nut M8 x 6.5mm nyloc |
| 1 | ```nut(M8nS_thin_nut)``` | Nut M8nS 13 x 4mm |
| 1 | ```washer(M6_washer)``` | Washer M6 x 12.5mm x 1.5mm | | 1 | ```washer(M6_washer)``` | Washer M6 x 12.5mm x 1.5mm |
| 1 | ```wingnut(M4_wingnut)``` | Wingnut M4 | | 1 | ```wingnut(M4_wingnut)``` | Wingnut M4 |

Binary file not shown.

Before

Width:  |  Height:  |  Size: 106 KiB

After

Width:  |  Height:  |  Size: 111 KiB