Added a couple of Raspberry Pi cameras.

2025-02-04 05:52:45 -05:00 · 2020-06-29 23:03:54 +01:00 · 2020-06-29 23:03:54 +01:00 · f6b512da1f
commit f6b512da1f
parent c7ea0939b9
7 changed files with 228 additions and 16 deletions
--- a/libtest.png
+++ b/libtest.png
--- a/libtest.scad
+++ b/libtest.scad
@ -29,6 +29,7 @@ use <tests/blowers.scad>
 use <tests/bulldogs.scad>
 use <tests/buttons.scad>
 use <tests/cable_strips.scad>
+use <tests/cameras.scad>
 use <tests/circlips.scad>
 use <tests/components.scad>
 use <tests/d_connectors.scad>
@ -334,6 +335,9 @@ translate([x3 + 70, veroboard_y + 30])
 translate([x3 + 140, veroboard_y + 20])
    pcb_mounts();

+translate([x3 + 170, veroboard_y + 16])
+    cameras();
+
 translate([x3, d_connectors_y])
    d_connectors();

--- a/readme.md
+++ b/readme.md
@ -26,22 +26,22 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
 <tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
 <tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
-<tr><td></td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
 </table>

 ---
@ -430,6 +430,42 @@ When the sides are constrained then a circular model is more accurate.
 |   3 | ```cable_strip(20, 25, 100, 30)``` |  Polypropylene strip 189mm x 24mm x 0.8mm |


+<a href="#top">Top</a>
+
+---
+<a name="Cameras"></a>
+## Cameras
+PCB cameras.
+
+
+[vitamins/cameras.scad](vitamins/cameras.scad) Object definitions.
+
+[vitamins/camera.scad](vitamins/camera.scad) Implementation.
+
+[tests/cameras.scad](tests/cameras.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```camera_connector(type)``` | The flex connector block for the camera itself |
+| ```camera_lens(type)``` | Stack of lens parts, can be round, rectanular or rounded rectangular, with optional tapered aperture |
+| ```camera_lens_offset(type)``` | Offset of the lens center from the PCB centre |
+| ```camera_pcb(type)``` | The PCB part of the camera |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```camera(type)``` | Draw specified PCB camera |
+
+![cameras](tests/png/cameras.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```camera(rpi_camera_v1)``` |  Raspberry Pi camera V1 |
+|   1 | ```camera(rpi_camera)``` |  Raspberry Pi focusable camera |
+
+
 <a href="#top">Top</a>

 ---
--- a/tests/cameras.scad
+++ b/tests/cameras.scad
@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/cameras.scad>
+
+use <../vitamins/pcb.scad>
+
+module cameras()
+    layout([for(c = cameras) pcb_length(camera_pcb(c))], 10, false) let(c = cameras[$i])
+        camera(c);
+
+if($preview)
+    cameras();
--- a/tests/png/cameras.png
+++ b/tests/png/cameras.png
--- a/vitamins/camera.scad
+++ b/vitamins/camera.scad
@ -0,0 +1,83 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! PCB cameras.
+//
+include <../utils/core/core.scad>
+use <pcb.scad>
+
+function camera_pcb(type)         = type[2]; //! The PCB part of the camera
+function camera_lens_offset(type) = type[3]; //! Offset of the lens center from the PCB centre
+function camera_lens(type)        = type[4]; //! Stack of lens parts, can be round, rectanular or rounded rectangular, with optional tapered aperture
+function camera_connector(type)   = type[5]; //! The flex connector block for the camera itself
+
+module camera(type) {           //! Draw specified PCB camera
+    vitamin(str("camera(", type[0], "): ", type[1]));
+    pcb = camera_pcb(type);
+
+    not_on_bom()
+        pcb(pcb);
+
+    translate_z(pcb_thickness(pcb)) {
+        color(grey(20))
+            translate(camera_lens_offset(type))
+                for(p = camera_lens(type)) {
+                    size = p[0];
+                    r = p[1];
+                    app = p[2];
+                    if(size.x)
+                        rounded_rectangle(size, r, center = false);
+                    else
+                        translate_z(size.y)
+                            rotate_extrude()
+                                difference() {
+                                    square([r, size.z]);
+
+                                    if(app)
+                                        translate([0, size.z])
+                                            hull() {
+                                                translate([0, -eps])
+                                                    square([app.y, eps * 2]);
+
+                                                translate([0, -app.z])
+                                                    square([app.x, app.z]);
+                                            }
+                                }
+                }
+        conn = camera_connector(type);
+        if(conn) {
+            color(grey(20))
+                translate(conn[0])
+                    rounded_rectangle(conn[1], 0.5, center = false);
+
+            flex = [5, 0.1];
+            color("orange")
+                hull() {
+                    translate_z(flex.y /2)
+                        translate(camera_lens_offset(type) + [0, camera_lens(type)[0][0].y / 2])
+                            cube([flex.x, eps, flex.y], center = true);
+
+                    translate_z(conn[1].z - flex.y)
+                        translate(conn[0] - [0, conn[1].y / 2])
+                             cube([flex.x, eps, flex.y], center = true);
+                }
+        }
+    }
+}
--- a/vitamins/cameras.scad
+++ b/vitamins/cameras.scad
@ -0,0 +1,58 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <smds.scad>
+
+rpi_camera_v1_pcb = ["", "",  25, 24, 1, 0, 2.1, 0, "green", false, [[2, -2], [-2, -2], [2, 9.6], [-2, 9.6]],
+    [
+        [12,   3.25,  0, "-flat_flex", true],
+        [-4.5, -4,    0, "smd_led", LED0603, "red"],
+        [-5.5, -3,    0, "smd_res", RES0603, "10K"],
+    ],
+    []];
+
+rpi_camera_v1 = ["rpi_camera_v1", "Raspberry Pi camera V1", rpi_camera_v1_pcb, [0, 9.6 - 12],
+    [
+        [[8, 8, 3], 0],
+        [[0, 0, 4], 7.5 / 2],
+        [[0, 0, 5], 5.5 / 2, [1.5/2, 2/2, 0.5]],
+    ],
+    [[0, 12 - 1.5 - 2.5], [8, 5, 1]]
+];
+
+rpi_camera_pcb = ["", "",  36, 36, 1.6, 0, 3.2, 0, "green", false, [[3.5, -3.5], [-3.5, -3.5], [3.5, 3.5], [-3.5, 3.5]],
+    [
+        [18,    4.25,  0, "-flat_flex", true],
+        [-3.8, -7.8,  0, "smd_led", LED0805, "red"],
+    ],
+    []];
+
+rpi_camera = ["rpi_camera", "Raspberry Pi focusable camera", rpi_camera_pcb, [0, 0],
+    [
+        [[13, 13, 3], 0],
+        [[22,  4, 3], 2 - eps],
+        [[0, 0, 8.5], 7],
+        [[0, 0,  12], 6],
+        [[0, 11, 4.3], 14 / 2, [8/2, 11/2, 1]],
+    ],
+    [[0, 18 - 1.5 - 2.5], [8, 5, 1]]
+];
+
+cameras = [rpi_camera_v1, rpi_camera];
+
+use <camera.scad>