mirror of
https://github.com/DJSundog/NopSCADlib.git
synced 2025-01-11 10:12:43 -05:00
Added copyright boiler plate and description.
Updated images and readme.
This commit is contained in:
Chris Palmer
parent
00690b61d2
commit
ad719dad5a
91
readme.md
91
readme.md
@ -28,27 +28,28 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Scs_bearing_blocks">Scs_bearing_blocks</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Sk_brackets">Sk_brackets</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Spools">Spools</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Kp_pillow_blocks">Kp_pillow_blocks</a> </td><td> <a href = "#Springs">Springs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Scs_bearing_blocks">Scs_bearing_blocks</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Sk_brackets">Sk_brackets</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spools">Spools</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Springs">Springs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Kp_pillow_blocks">Kp_pillow_blocks</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
|
||||
</table>
|
||||
|
||||
---
|
||||
@ -589,6 +590,54 @@ LCD dispays.
|
||||
| 1 | ```display(SSD1963_4p3)``` | LCD display SSD1963 4.3" |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
<a name="Extrusion_brackets"></a>
|
||||
## Extrusion_brackets
|
||||
Brackets for joining extrusions at a corner.
|
||||
|
||||
|
||||
[vitamins/extrusion_brackets.scad](vitamins/extrusion_brackets.scad) Object definitions.
|
||||
|
||||
[vitamins/extrusion_bracket.scad](vitamins/extrusion_bracket.scad) Implementation.
|
||||
|
||||
[tests/extrusion_brackets.scad](tests/extrusion_brackets.scad) Code for this example.
|
||||
|
||||
### Properties
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```extrusion_corner_bracket_base_thickness(type)``` | Thickness of base of bracket |
|
||||
| ```extrusion_corner_bracket_hole_offset(type)``` | Hole offset from corner |
|
||||
| ```extrusion_corner_bracket_side_thickness(type)``` | Thickness of side of bracket |
|
||||
| ```extrusion_corner_bracket_size(type)``` | Size of bracket |
|
||||
| ```extrusion_inner_corner_bracket_size(type)``` | Size of inner bracket |
|
||||
|
||||
### Modules
|
||||
| Module | Description |
|
||||
|:--- |:--- |
|
||||
| ```extrusion_corner_bracket(type)``` | Corner bracket for extrusion |
|
||||
| ```extrusion_corner_bracket_assembly(type, part_thickness = 2, screw_type = M4_cap_screw, nut_type = M4_sliding_t_nut, max_screw_depth = 6)``` | Assembly with fasteners in place |
|
||||
| ```extrusion_corner_bracket_hole_positions(type)``` | Place children at hole positions |
|
||||
| ```extrusion_inner_corner_bracket(type, grub_screws = true)``` | Inner corner bracket for extrusion |
|
||||
|
||||
|
||||
|
||||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 1 | ```extrusion(E2020, 20)``` | Extrusion E2020 x 20mm |
|
||||
| 1 | ```extrusion(E2020, 30)``` | Extrusion E2020 x 30mm |
|
||||
| 1 | ```extrusion(E2020, 40)``` | Extrusion E2020 x 40mm |
|
||||
| 1 | ```extrusion(E2020, 50)``` | Extrusion E2020 x 50mm |
|
||||
| 2 | ```extrusion_corner_bracket(E20_corner_bracket)``` | Extrusion corner bracket 20 |
|
||||
| 2 | ```extrusion_inner_corner_bracket(E20_inner_corner_bracket, true)``` | Extrusion inner corner bracket 4.5 |
|
||||
| 1 | ```extrusion_inner_corner_bracket(E20_inner_corner_bracket, false)``` | Extrusion inner corner bracket 4.5 |
|
||||
| 4 | ```sliding_t_nut(M4_sliding_t_nut)``` | Nut M4 sliding T |
|
||||
| 4 | ```screw(M4_cap_screw, 8)``` | Screw M4 cap x 8mm |
|
||||
| 4 | ```washer(M4_washer)``` | Washer M4 x 9mm x 0.8mm |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2018
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
@ -58,4 +58,3 @@ module extrusion_brackets() {
|
||||
if($preview)
|
||||
let($show_threads = true)
|
||||
extrusion_brackets();
|
||||
|
||||
|
||||
BIN
tests/png/extrusion_brackets.png
Normal file
BIN
tests/png/extrusion_brackets.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 56 KiB |
@ -1,13 +1,34 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
//! Brackets for joining extrusions at a corner.
|
||||
|
||||
include <NopSCADlib/core.scad>
|
||||
include <screws.scad>
|
||||
include <nuts.scad>
|
||||
|
||||
function extrusion_inner_corner_racket_size(type) = type[1]; //! Size of bracket
|
||||
function extrusion_inner_corner_bracket_size(type) = type[1]; //! Size of inner bracket
|
||||
|
||||
module extrusion_inner_corner_bracket(type, grub_screws = true) { //! Inner corner bracket for extrusion
|
||||
vitamin(str("extrusion_inner_corner_bracket(", type[0], ", ", grub_screws, "): Extrusion inner corner bracket ", type[1].z));
|
||||
|
||||
size = extrusion_inner_corner_racket_size(type);
|
||||
size = extrusion_inner_corner_bracket_size(type);
|
||||
armLength = size.x;
|
||||
bottomTabOffset = 4;
|
||||
topTabOffset = 10;
|
||||
@ -116,4 +137,3 @@ module extrusion_corner_bracket_assembly(type, part_thickness = 2, screw_type =
|
||||
sliding_t_nut(nut_type);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user